ISI papers

Aceites para publicação / accepted for publication

Areias, P.; Vu-Bac, N.; Rabczuk, T. (accepted): "A multisurface constitutive model for highly cross-linked polymers with yield data obtained from molecular dynamics simulations", International Journal of Mechanics and Materials in Design, early view.

Carretero-Ayuso, M.; Moreno-Cansado, A.; Brito, J. de (accepted): "Multiparameter evaluation of deficiencies in tiled pitched roofs", Journal of Performance of Constructed Facilities, early view.

Carretero-Ayuso, M.; Brito, J. de (accepted): "Study of the prevalence of critical and conflict-prone points in facades", Engineering Failure Analysis, early view.

Estanqueiro, B.; Silvestre, J.D.; Brito, J. de; Pinheiro, M.D. (accepted): "Environmental life cycle assessment of coarse natural and recycled aggregates for concrete", European Journal of Environmental and Civil Engineering, early view.

Garcea, G.; Leonetti, L.; Magisano, D.; Gonçalves, R.; Camotim, D. (accepted): "Deformation modes for the post-critical analysis of thin-walled compressed members by a Koiter semi-analytic approach", International Journal of Solids and Structures, early view.

Garrido, M.; Correia, J.R. (accepted): "Elastic and viscoelastic behaviour of sandwich panels with glass-fibre reinforced polymer faces and polyethylene terephthalate foam core", Journal of Sandwich Structures and Materials, early view.

Garrido, M.; Correia, J.R.; Keller, T.; Cabral-Fonseca, S. (accepted): "Creep of sandwich panels with longitudinal reinforcement ribs for civil engineering applications: Experiments and composite creep modeling", Journal of Composites for Construction, early view.

Mendes, N.; Costa, A.A.; Lourenço, P.B.; Bento, R.; Beyer, K.; De Felice, G.; Gams, M.; Griffith, M.C.; Ingham, J.M.; Lagomarsino, S.; Lemos, J.V.; Liberatore, D.; Modena, C.; Oliveira, D.V.; Penna, A.; Sorrentino, L. (accepted): "Methods and approaches for blind test predictions of out-of-plane behavior of masonry walls: A numerical comparative study", International Journal of Architectural Heritage, early view.

Moura, A.; Flores-Colen, I.; Brito, J. de; Dionísio, A. (accepted): " Study of the cleaning effectiveness of limestone and lime-based mortar substrates protected with anti-graffiti products", Journal of Cultural Heritage, early view.

Nunes, F.; Silvestre, N.; Correia, J.R. (accepted): "Progressive damage analysis of web crippling of GFRP pultruded I-sections", Journal of Composites for Construction, early view.

Pipa, H.; Brito, J. de; Cruz, C.O. (accepted): "Sustainable rehabilitation of historical urban areas: Portuguese case of the urban rehabilitation societies", Journal of Urban Planning and Development, early view.

Ribeiro, D.; Cardoso, R. (accepted): "A review on models for the prediction of the diameter of jet grouting columns", European Journal of Environmental and Civil Engineering, early view.

Santos, F.A. (accepted): "Shape-memory alloys as macrostrain sensors", Structural Control and Health Monitoring, early view.

Silva, P.; Brito, J. de (accepted): "Experimental study of the mechanical properties and shrinkage of self-compacting concrete with binary and ternary mixes of fly ash and limestone filler", European Journal of Environmental and Civil Engineering, early view.

Silva, R.V.; Brito, J. de; Dhir, R.K. (accepted): "Availability and processing of recycled aggregates within the construction and demolition supply chain: A review", Journal of Cleaner Production, early view.

Vieira, R.F.; Virtuoso, F.B.E.; Pereira, E.B.R. (accepted): "Buckling of thin-walled structures through a higher order beam model", Computers & Structures, early view.

Zuniga, D.; Brito, J.; Rua, H. (accepted): "Walls and defences of a roman fort to be built for historical reenactment", International Journal of Architectural Heritage, early view.

2017 (incompleto/incomplete)

Almeida, A.; Ferreira, R.; Proença, J.M.; Gago, A.S. (2017): "Seismic retrofit of RC building structures with Buckling Restrained Braces", Engineering Structures, V. 130, 14-22, January 2017.

Baptista, C.; Kannuna, S.; Pedro, J.O.; Nussbaumer, A. (2017): "Fatigue behaviour of CHS tubular bracings in steel bridges", International Journal of Fatigue, V. 96, 127-141, March 2017.

Biscaia, H.C.; Chastre, C.; Cruz, D.; Viegas, A. (2017): "Prediction of the interfacial performance of CFRP laminates and old timber bonded joints with different strengthening techniques", Composites Part B: Engineering, V. 108, 1-17, January 2017.

Cavaco, E.; Câmara, J. (2017): "Experimental research on the behaviour of concrete-to-concrete interfaces subjected to a combination of shear and bending moment", Engineering Structures, V. 132, 278-287, February 2017.

Evangelista, L.; Brito, J. de (2017): "Flexural behaviour of reinforced concrete beams made with fine recycled concrete aggregates", KSCE Journal of Civil Engineering, V. 21, n.º 1, 353-363, January 2017.

Fernandes, H.; Lúcio, V.; Ramos, A. (2017): "Strengthening of RC slabs with reinforced concrete overlay on the tensile face", Engineering Structures, V. 132, 540-550, February 2017.

García-González, J.; Barroqueiro, T.; Evangelista, L.; Brito, J. de; De Belie, N.; Morán-del Pozo, J.; Juan-Valdés, A. (2017): "Fracture energy of coarse recycled aggregate concrete using the wedge splitting test method: influence of water-reducing admixtures", Materials and Structures, V. 50, 120, April 2017.

Landesmann, A.; Camotim, D.; Dinis, P.B.; Cruz, R. (2017): " Short-to-intermediate slender pin-ended cold-formed steel equal-leg angle columns: Experimental investigation, numerical simulations and DSM design", Engineering Structures, V. 132, 471-493, February 2017.

Ledesma, E.F.; Jiménez, J.R.; Ayuso, J.; Fernández, J.M.; Brito, J. de (2017): "Experimental study of the mechanical stabilization of electric arc furnace dust using fluid cement mortars", Journal of Hazardous Materials, V. 326, 26-35, March 2017.

Martins, A.D.; Camotim, D.; Dinis, P.B. (2017): "Behaviour and DSM design of stiffened lipped channel columns undergoing local-distortional interaction", Journal of Constructional Steel Research, V. 128, 99-118, January 2017.

Miranda, L.; Milosevic, J.; Bento, R. (2017): "Cyclic behaviour of stone masonry walls strengthened by grout injection", Materials and Structures, V. 50, art. 47, February 2017.

Moura, F.; Cambra, P.; Gonçalves, A.B. (2017): "Measuring walkability for distinct pedestrian groups with a participatory assessment method: A case study in Lisbon", Landscape and Urban Planning, V. 157, 282-296, January 2017.

Natário, P.; Silvestre, N.; Camotim, D. (2017): "Web crippling of beams under ITF loading: A novel DSM-based design approach", Journal of Constructional Steel Research, V. 128, 812-824, January 2017.

Pacheco, J.; Brito, J. de; Ferreira, J.; Soares, D. (2017): "Dynamic characterization of full-scale structures made with recycled coarse aggregates", Journal of Cleaner Production, V. 142, Part 4, 4195-4205, January 2017.

Real, S.; Bogas, J.A.; Ferrer, B. (2017): "Service life of reinforced structural lightweight aggregate concrete under chloride-induced corrosion", Materials and Structures, V. 50, 101, April 2017.

Romero Esquinas, A.; Ramos, C.; Jiménez, J.R.; Fernández, J.M.; Brito, J. de (2017): "Mechanical behaviour of self-compacting concrete made with recovery filler from hot-mix asphalt plants", Construction and Building Materials, V. 131, 114-128, January 2017.

Serralheiro, M.I.; Brito, J. de; Silva, A. (2017): "Methodology for service life prediction of architectural concrete facades", Construction and Building Materials, V. 133, 261-274, February 2017.

Teixeira de Freitas, J.; Cuong, P.T.; Faria, R. (2017): " Hybrid finite elements for nonlinear thermal and hygral problems", Computers & Structures, V. 182, 14-25, April 2017.

Valarinho, L.; Sena-Cruz, J.; Correia, J.R.; Branco, F.A. (2017): " Numerical simulation of the flexural behaviour of composite glass-GFRP beams using smeared crack models", Composites Part B: Engineering, V. 110, 336-350, February 2017.

2016 (incompleto/incomplete)

Almeida, A.; Inácio, M.; Lúcio, V.; Ramos, A.P. (2016): "Punching behaviour of RC flat slabs under reversed horizontal cyclic loading", Engineering Structures, V. 117, 204-219, June 2016.

Amado, M.; Poggi, F.; Amado, A.R. (2016): "Energy efficient city: A model for urban planning", Sustainable Cities and Society, V. 26, 476-485, October 2016.

Andersson, L.-E.; Pinto da Costa, A.; Agwa, M.A. (2016): "Existence and uniqueness for frictional incremental and rate problems – sharp critical bounds", ZAMM - Journal of Applied Mathematics and Mechanics, V. 96, n.º 1, 78-105, January 2016.

Areias, P.; Mota Soares, C.A.; Rabczuk, T. (2016): "Least-squares finite strain hexahedral element/constitutive coupling based on parametrized configurations and the Löwdin frame", Finite Elements in Analysis and Design, V. 108, 96-109, January 2016.

Areias, P.; Mota Soares, C.A.; Rabczuk, T.; Garção, J. (2016): "A finite-strain solid–shell using local Löwdin frames and least-squares strains", Computer Methods in Applied Mechanics and Engineering, V. 311, 112-133, November 2016.

Areias, P.; Msekh, M.A.; Rabczuk, T. (2016): "Damage and fracture algorithm using the screened Poisson equation and local remeshing", Engineering Fracture Mechanics, V. 158, 116-143, June 2016.

Areias, P.; Rabczuk, T.; Camanho, P.P. (2016): "Finite-strain laminates: Bending-enhanced hexahedron and delamination", Composite Structures, V. 139, 277-290, April 2016.

Areias, P.; Rabczuk, T.; César de Sá, J. (2016): "A novel two-stage discrete crack method based on the screened Poisson equation and local mesh refinement", Computational Mechanics, V, 58, n.º 6, 1003-1018, December 2016.

Areias, P.; Rabczuk, T.; César de Sá, J.; Alves, J.L. (2016): "Semi-implicit finite strain constitutive integration and mixed strain/stress control based on intermediate configurations", Engineering Structures, V. 124, 344-360, October 2016.

Areias, P.; Rabczuk, T.; Msekh, M.A. (2016): "Phase-field analysis of finite-strain plates and shells including element subdivision", Computer Methods in Applied Mechanics and Engineering, V. 312, 322-350, December 2016.

Areias, P.; Samaniego, E.; Rabczuk, T. (2016): "A staggered approach for the coupling of Cahn–Hilliard type diffusion and finite strain elasticity", Computational Mechanics, V. 57, n.º 2, 339-351, February 2016.

Arruda, M.R.T.; Firmo, J.P.; Correia, J.R.; Tiago, C. (2016): "Numerical modelling of the bond between concrete and CFRP laminates at elevated temperatures", Engineering Structures, V. 110, 233-243, March 2016.

Belejo, A.; Bento, R. (2016): "Improved Modal Pushover Analysis in seismic assessment of asymmetric plan buildings under the influence of one and two horizontal components of ground motions", Soil Dynamics and Earthquake Engineering, V. 87, 1-15, August 2016.

Beltrán, M.G.; Barbudo, A.; Agrela, F.; Jiménez, J.R.; Brito, J. de (2016): "Mechanical performance of bedding mortars made with olive biomass bottom ash", Construction and Building Materials, V. 112, 699-707, June 2016.

Bernardo, M.; Gomes, M.C.; Brito, J. de (2016): "Demolition waste generation for development of a regional management chain model", Waste Management, V. 49, 156-169, March 2016.

Biscaia, H.C.; Borba, I.S.; Silva, C.; Chastre, C. (2016): "A nonlinear analytical model to predict the full-range debonding process of FRP-to-parent material interfaces free of any mechanical anchorage devices", Composite Structures, V. 138, 52-63, March 2016.

Biscaia, H.C.; Cruz, D.; Chastre, C. (2016): "Analysis of the debonding process of CFRP-to-timber interfaces", Construction and Building Materials, V. 113, 96-112, June 2016.

Bogas, J.A.; Brito, J. de; Ramos, D. (2016): "Freeze-thaw resistance of concrete produced with fine recycled concrete aggregates", Journal of Cleaner Production, V. 115, 294-306, March 2016.

Bogas, J.A.; Real, S.; Ferrer, B. (2016): "Biphasic carbonation behaviour of structural lightweight aggregate concrete produced with different types of binder", Cement and Concrete Composites, V. 71, 110-121, August 2016.

Bourne-Webb, P.; Bodas Freitas, T.; Assunção, R.M. (2016): "Soil–pile thermal interactions in energy foundations", Géotechnique, V. 66, n.º 2, 167-171, February 2016.

Bourne-Webb, P.; Bodas Freitas, T.; Gonçalves, R.A.C. (2016): "Thermal and mechanical aspects of the response of embedded retaining walls used as shallow geothermal heat exchangers", Energy and Buildings, V. 125, 130-141, August 2016.

Bourne-Webb, P.; Burlon, S.; Javed, S.; Kürten, S.; Loveridge, F. (2016): "Analysis and design methods for energy geostructures", Renewable and Sustainable Energy Reviews, V. 65, 402-419, November 2016.

Bravo, M.; Silva, A.S.; Brito, J. de; Evangelista, L. (2016): "Microstructure of concrete with aggregates from construction and demolition waste recycling plants", Microscopy and Microanalysis, V. 22, n.º 1, 149-167, February 2016.

Cardoso, R. (2016): "Porosity and tortuosity influence on geophysical properties of an artificially cemented sand", Engineering Geology, V. 211, 198-207, August 2016.

Cardoso, R.; Silva, R.V.; Brito, J. de; Dhir, R. (2016): "Use of recycled aggregates from construction and demolition waste in geotechnical applications: A literature review", Waste Management, V. 49, 131-145, March 2016.

Carmo, R.N.F.; Costa, H.; Rodrigues, M. (2016): "Experimental study of punching failure in LWAC slabs with different strengths", Materials and Structures, V. 49, n.º 7, 2611-2626, July 2016.

Carretero-Ayuso, M.; Brito, J. de (2016): "Analysis of the execution deficiencies of flat roofs with bituminous membranes", Journal of Performance of Constructed Facilities, V. 30, n.º 6, art. 04016049, December 2016.

Cartuxo, F.; Brito, J. de; Evangelista, L.; Jiménez, J.R.; Ledesma, E.F. (2016): "Increased durability of concrete made with fine recycled concrete aggregates using superplasticizers", Materials, V. 9, n.º 2, art. 98, , February 2016.

Cava, D.; Camotim, D.; Dinis, P.B.; Madeo, A. (2016): "Numerical investigation and direct strength design of cold-formed steel lipped channel columns experiencing local–distortional–global interaction", Thin-Walled Structures, V. 105, 231-247, August 2016.

Ceia, F.; Raposo, J.; Guerra, M.; Júlio, E.; Brito, J. de (2016): "Shear strength of recycled aggregate concrete to natural aggregate concrete interfaces", Construction and Building Materials, V. 109, 139-145, April 2016.

Chang, S.-J.; Ferreira, A.M.G.; Faccenda, M. (2016): "Upper- and mid-mantle interaction between the Samoan plume and the Tonga–Kermadec slabs", Nature Communications, V. 17, art. 10799, February 2016.

Coelho, A. (2016): "Preliminary study for self-sufficiency of construction materials in a Portuguese region - Évora", Journal of Cleaner Production, V. 112, Part 1, 771-786, January 2016.

Del Rey, I.; Ayuso, J.; Barbudo, A.: Galvín, A.P.; Agrela, F.; Brito, J. de (2016): "Feasibility study of cement-treated 0–8 mm recycled aggregates from construction and demolition waste as road base layer", Road Materials and Pavement Design, V. 17, n.º 3, 678-692, June 2016.

Dobbelaere, G.; Brito, J. de; Evangelista, L. (2016): "Definition of an equivalent functional unit for structural concrete incorporating recycled aggregates", Engineering Structures, V. 122, 196-208, September 2016.

Domingues, A.; Silveira, G.; Ferreira, A.M.G.; Chang, S.-J.; Custódio, S.; Fonseca, J. (2016): "Ambient noise tomography of the East African Rift in Mozambique", Geophysical Journal International, V. 204, n.º 3, 1565-1578, March 2016.

Duarte, A.P.C.; Silva, B.A.; Silvestre, N.; Brito, J. de; Júlio, E.; Castro, J.M. (2016): "Experimental study on short rubberized concrete-filled steel tubes under cyclic loading", Composite Structures, V. 136, 394-404, February 2016.

Duarte, A.P.C.; Silva, B.A.; Silvestre, N.; Brito, J. de; Júlio, E.; Castro, J.M. (2016): "Finite element modelling of short steel tubes filled with rubberized concrete", Composite Structures, V. 150, 28-40, August 2016.

Duarte, A.P.C.; Silva, B.A.; Silvestre, N.; Brito, J. de; Júlio, E.; Castro, J.M. (2016): "Tests and design of short steel tubes filled with rubberised concrete", Engineering Structures, V. 112, 274-286, April 2016.

Escórcio, P.; França, P.M. (2016): "Experimental study of a rehabilitation solution that uses GFRP bars to replace the steel bars of reinforced concrete beams", Engineering Structures, V. 128, 166-183, December 2016.

Falcão, A.P.; Matias, M.; Pestana, R.; Gonçalves, A.B.; Heleno, S. (2016): "Methodology to combine topography and bathymetry data sets for hydrodynamic simulations: Case of Tagus River", Journal of Surveying Engineering, V. 142, n.º 4, art. 05016005, November 2016.

Farinha, C.; Brito, J. de; Veiga, R.; Lucas, J. (2016): "Reduction of cement content in renderings with fine sanitary ware aggregates", Materials and Structures, V. 49, n.º 5, 1605-1618, May 2016.

Fernandes, C.; Brito, J. de; Cruz, C.O. (2016): "Thermal retrofitting of façades: architectural integration of ETICS", Journal of Performance of Constructed Facilities, V. 30, n.º 2, art. 06015002, April 2016.

Ferraz, G.; Brito, J. de; Freitas, V.; Silvestre, J. (2016): "State-of-the-art review of building inspection systems", Journal of Performance of Constructed Facilities, V. 30, n.º 5, art. 04016018, October 2016.

Ferrer, B.; Bogas, J.A.; Real, S. (2016): "Service life of structural lightweight aggregate concrete under carbonation-induced corrosion", Construction and Building Materials, V. 120, 161-171, September 2016.

Ferrito, T.; Milosevic, J.; Bento, R. (2016): "Seismic vulnerability assessment of a mixed masonry–RC building aggregate by linear and nonlinear analyses", Bulletin of Earthquake Engineering, V. 14, n.º 8, 2299-2237, August 2016.

Flores-Colen, I.; Brito, J. de; Freitas, V.P. (2016): "Using ultrasound for in-service assessment of rendered walls", Experimental Techniques, V. 40, n.º 4, 1203-1214, August 2016.

Flores-Colen, I.; Silva, L.; Brito, J. de; Freitas, V.P. (2016): "Drying index for in-service physical performance assessment of renders", Construction and Building Materials, V. 112, 1101-1109, June 2016.

Fonseca, B.F.; Piçarra, S.; Ferreira Pinto, A.P.; Montemor, M.F. (2016): "Development of formulations based on TEOS-dicarboxylic acids for consolidation of carbonate stones", New Journal of Chemistry, V. 40, n.º 9, 7493-7503, September 2016.

Garcea, G.; Gonçalves, R.; Bilotta, A.; Manta, D.; Bebiano, R.; Leonetti, L.; Magisano, D.; Camotim, D. (2016): "Deformation modes of thin-walled members: A comparison between the method of Generalized Eigenvectors and Generalized Beam Theory", Thin-Walled Structures, V. 100, 192-212, March 2016.

Garrido, M.; Correia, J.R.; Keller, T. (2016): "Effect of service temperature on the flexural creep of vacuum infused GFRP laminates used in sandwich floor panels", Composites Part B: Engineering, V. 90, 160-171, April 2016.

Garrido, M.; Correia, J.R.; Keller, T. (2016): "Effect of service temperature on the shear creep response of rigid polyurethane foam used in composite sandwich floor panels", Construction and Building Materials, V. 118, 235-244, August 2016.

Garrido, M.; Correia, J.R.; Keller, T.; Branco, F.A. (2016): "Connection systems between composite sandwich floor panels and load-bearing walls for building rehabilitation", Engineering Structures, V. 106, 209-221, January 2016.

Gomes, M.; Gonçalves, T.; Faria, P. (2016): "Hydric behavior of earth materials and the effects of their stabilization with cement or lime: Study on repair mortars for historical rammed earth structures", Journal of Materials in Civil Engineering, V. 28, n.º 7, art. 04016041, July 2016.

Gomes, R.C.; Santos, J.A.; Razavi, A.; Lopez-Caballero, F. (2016): "Validation of a strategy to predict secant shear modulus and damping of soils with an elastoplastic model", KSCE Journal of Civil Engineering, V. 20, n.º 2, 609-622, March 2016.

Gonçalves, A.B.; Almeida, J.; Rua, H. (2016): "Assessment of the permeability of historical defensive systems: the case of the Lines of Torres Vedras", International Journal of Historical Archaeology, V. 20, n.º 2, 229-248, June 2016.

Gonçalves, R. (2016): "A shell-like stress resultant approach for elastoplastic geometrically exact thin-walled beam finite elements", Thin-Walled Structures, V. 103, 263-272, June 2016.

Gonçalves, R.; Camotim, D. (2016): "GBT deformation modes for curved thin-walled cross-sections based on a mid-line polygonal approximation", Thin-Walled Structures, V. 103, 231-243, June 2016.

Gouveia, F.; Lopes, I.; Gomes, R.C. (2016): "Deeper V_S profile from joint analysis of Rayleigh wave data", Engineering Geology, V. 202, 85-98, March 2016.

Grammatikos, S.A.; Jones, R.G.; Evernden, M.; Correia, J.R. (2016): "Thermal cycling effects on the durability of a pultruded GFRP material for off-shore civil engineering structures", Composite Structures, V. 153, 297-310, October 2016.

Henriques, D.; Gonçalves, R.; Camotim, D. (2016): "GBT-based finite element to assess the buckling behaviour of steel–concrete composite beams", Thin-Walled Structures, V. 107, 207-220, October 2016.

Ismael, R.; Silva, J.V.; Carmo, R.N.F.; Soldado, E.; Lourenço, C.; Costa, H.; Júlio, E. (2016): "Influence of nano-SiO₂ and nano-Al₂O₃ additions on steel-to-concrete bonding", Construction and Building Materials, V. 125, 1080-1092, October 2016.

Júlio, M.F.; Soares, A.; Ilharco, L.M.; Flores-Colen, I.; Brito, J. de (2016): "Aerogel-based renders with lightweight aggregates: Correlation between molecular/pore structure and performance", Construction and Building Materials, V. 124, 485-495, October 2016.

Júlio, M.F.; Soares, A.; Ilharco, L.M.; Flores-Colen, I.; Brito, J. de (2016): "Silica-based aerogels as aggregates for cement-based thermal renders", Cement and Concrete Composites, V. 72, 309-318, September 2016.

Landesmann, A.; Camotim, D. (2016): "Distortional failure and DSM design of cold-formed steel lipped channel beams under elevated temperatures", Thin-Walled Structures, V. 98 - Part A, 75-93, January 2016.

Landesmann, A.; Camotim, D.; Garcia, R. (2016): "On the strength and DSM design of cold-formed steel web/flange-stiffened lipped channel columns buckling and failing in distortional modes", Thin-Walled Structures, V. 105, 248-265, August 2016.

López-Uceda, A.; Ayuso, J.; Jiménez, J.R.; Agrela, F.; Barbudo, A.; Brito, J. de (2016): "Upscaling the use of mixed recycled aggregates in non-structural low cement concrete", Materials, V. 9, n.º 2, art. 91, , February 2016.

Lucas, J.; Brito, J. de; Veiga, R.; Farinha, C. (2016): "The effect of using sanitary ware as aggregates on rendering mortars' performance", Materials & Design, V. 91, 155-164, February 2016.

Machado, J.S.; Santos, S.; Pinho, F.F.S.; Luís, F.; Alves, A.; Simões, R.; Rodrigues, J.C. (2016): "Impact of high moisture conditions on the serviceability performance of wood plastic composite decks", Materials & Design, V. 103, 122-131, August 2016.

Machado-e-Costa, M.; Valarinho, L.; Silvestre, N.; Correia, J.R. (2016): "Modeling of the structural behavior of multilayer laminated glass beams: Flexural and torsional stiffness and lateral-torsional buckling", Engineering Structures, V. 128, 265-282, December 2016.

Magos, M.; Brito, J. de; Gaspar, P.L.; Silva, A. (2016): "Application of the factor method to the prediction of the service life of external paint finishes on façades", Materials and Structures, V. 49, n.º 12, 5209-5225, December 2016.

Manta, D.; Gonçalves, R. (2016): "A geometrically exact Kirchhoff beam model including torsion warping", Computers & Structures, V. 177, 192-203, December 2016.

Martins, A.D.; Dinis, P.B.; Camotim, D. (2016): "On the influence of local-distortional interaction in the behaviour and design of cold-formed steel web-stiffened lipped channel columns", Thin-Walled Structures, V. 101, 181-204, April 2016.

Martins, D.J.; Correia, J.R.; Brito, J. de (2016): "The effect of high temperature on the residual mechanical performance of concrete made with recycled ceramic coarse aggregates", Fire and Materials, V. 40, n.º 2, 289-304, March 2016.

Maunder, E.A-W.; Almeida, J.P.M.; Pereira, O. (2016): "The stability of stars of simplicial hybrid equilibrium finite elements for solid mechanics", International Journal for Numerical Methods in Engineering, V. 107, n.º 8, 633-668, August 2016.

Moldovan, I.D. (2016): "A new approach to non-homogeneous hyperbolic boundary value problems using hybrid-Trefftz stress finite elements", Engineering Analysis with Boundary Elements, V. 69, 57-71, August 2016.

Moldovan, I.D.; Correia, A.G.; Pereira, C. (2016): "Bender-based G₀ measurements: A coupled numerical–experimental approach", Computers and Geotechnics, V. 73, 24-36, March 2016.

Mota de Sá, F.; Ferreira, M.A.; Oliveira, C.S. (2016): "QuakeIST® earthquake scenario simulator using interdependencies", Bulletin of Earthquake Engineering, V. 14, n.º 7, 2047-2067, July 2016.

Moura, A.; Flores-Colen, I.; Brito, J. de (2016): "Study of the effect of three anti-graffiti products on the physical properties of different substrates", Construction and Building Materials, V. 107, 157-164, March 2016.

Natário, P.; Silvestre, N.; Camotim, D. (2016): "Direct strength prediction of web crippling failure of beams under ETF loading", Thin-Walled Structures, 98 - Part B, 360-374, January 2016.

Neto, D.C.S.; Cruz, C.O.; Rodrigues, F.; Silva, P. (2016): "Bibliometric analysis of PPP and PFI literature: Overview of 25 years of research", Journal of Construction Engineering and Management, V. 142, n.º 10, art. 06016002, October 2016.

Neto, P.; Alfaiate, J.; Dias-da-Costa, D.; Vinagre, J. (2016): "Mixed-mode fracture and load misalignment on the assessment of FRP-concrete bond connections", Composite Structures, V. 135, 49-60, January 2016.

Neto, P.; Alfaiate, J.; Vinagre, J. (2016): "Assessment of the dependence of CFRP-concrete behaviour on the width of the bonded materials", Composites Part B: Engineering, V. 91, 448-457, April 2016.

Neves, A.C.; Simões, F.M.F.; Pinto da Costa, A. (2016): "Vibrations of cracked beams: Discrete mass and stiffness models", Computers & Structures, V. 168, 68-77, May 2016.

Nunes, F.; Correia, J.R.; Silvestre, N. (2016): "Structural behavior of hybrid FRP pultruded beams: Experimental, numerical and analytical studies", Thin-Walled Structures, V. 106, 201-217, September 2016.

Nunes, F.; Correia, J.R.; Silvestre, N. (2016): "Structural behaviour of hybrid FRP pultruded columns. Part 1: Experimental study", Composite Structures, V. 139, 291-303, April 2016.

Nunes, F.; Silvestre, N.; Correia, J.R. (2016): "Structural behaviour of hybrid FRP pultruded columns. Part 2: Numerical study", Composite Structures, V. 139, 304-319, April 2016.

Octávio, C.; Dias-da-Costa, D.; Alfaiate, J.; Júlio, E. (2016): "Modelling the behaviour of steel fibre reinforced concrete using a discrete strong discontinuity approach", Engineering Fracture Mechanics, V. 154, 12-23, March 2016.

Oliveira, C.S.; Camacho, V.T. (2016): "Data-base with in-situ vibration frequencies of bridges in Portugal", Journal of Civil Structural Health Monitoring, V. 6, n.º 5, 851-862, November 2016.

Parisi, L.; Ferreira, A.M.G. (2016): "Empirical assessment of the validity limits of the surface wave full ray theory using realistic 3-D Earth models", Geophysical Journal International, V. 205, n.º 1, 146-159, April 2016.

Paulo, P.; Branco, F.; Brito, J. de; Silva, A. (2016): "BuildingsLife - The use of genetic algorithms for maintenance plan optimization", Journal of Cleaner Production, V. 121, 84-98, May 2016.

Pedro, J.J.O.; Reis, A.J. (2016): "Simplified assessment of cable-stayed bridges buckling stability", Engineering Structures, V. 114, 93-103, May 2016.

Pereira, D.; Gago, A.; Proença, J.; Morgado, T. (2016): "Fire performance of sandwich wall assemblies", Composites Part B: Engineering, V. 93, 123-131, May 2016.

Peres, N.; Gonçalves, R.; Camotim, D. (2016): "First-order generalised beam theory for curved thin-walled members with circular axis", Thin-Walled Structures, V. 107, 345-361, October 2016.

Prieto, A.; Silva, A.; Brito, J. de; Alejandre, F. (2016): "Functional and physical service life of natural stone claddings", Journal of Materials in Civil Engineering, V. 28, n.º 12, art. 04016150, December 2016.

Real, S.; Bogas, J.A.; Gomes, M.G.; Ferrer, B. (2016): "Thermal conductivity of structural lightweight aggregate concrete", Magazine of Concrete Research, V. 68, n.º 15, 798-808, August 2016.

Real, S.; Gomes, M.G.; Rodrigues, A.M.; Bogas, J.A. (2016): "Contribution of structural lightweight aggregate concrete to the reduction of thermal bridging effect in buildings", Construction and Building Materials, V. 121, 460-470, September 2016.

Rodrigues, J.D.; Ferreira Pinto, A.P. (2016): "Laboratory and onsite study of barium hydroxide as a consolidant for high porosity limestones", Journal of Cultural Heritage, V. 19, 467-476, May-June 2016.

Sá, M.F.; Gomes, A.M.; Correia, J.R.; Silvestre, N. (2016): "Flexural creep response of pultruded GFRP deck panels: Proposal for obtaining full-section viscoelastic moduli and creep coefficients", Composites Part B: Engineering, V. 98, 213-224, August 2016.

Santos, F.A. (2016): "Buckling control using shape-memory alloy cables", Journal of Engineering Mechanics, V. 142, n.º 6, art. 04016029, June 2016.

Santos, F.A.; Cismasiu, C.; Bedon, C. (2016): "Smart glazed cable façade subjected to a blast loading", Proceedings of the Institution of Civil Engineers - Structures and Buildings, V. 169, n.º 3, 223-232, March 2016.

Sardinha, M.; Brito, J. de; Rodrigues. R. (2016): "Durability properties of structural concrete containing very fine aggregates of marble sludge", Construction and Building Materials, V. 119, 45-52, August 2016.

Silva, A.; Brito, J. de; Gaspar, P.L. (2016): "Comparative analysis of service life prediction methods applied to rendered façades", Materials and Structures, V. 49, n.º 11, 4893-4910, November 2016.

Silva, A.; Brito, J. de; Gaspar. P. (2016): "Stochastic approach to the factor method: durability of rendered façades", Journal of Materials in Civil Engineering, V. 28, n.º 2, 04015130, February 2016.

Silva, A.; Gaspar, P.L.; Brito, J. de; Neves, L.C. (2016): "Probabilistic analysis of degradation of façade claddings using Markov chain models", Materials and Structures, V. 49, n.º 7, 2871-2892, July 2016.

Silva, A.; Neves, L.C.; Gaspar, P.L.; Brito, J. de (2016): "Probabilistic transition of condition: render facades", Building Research & Information, V. 44, n.º 3, 301-318, April 2016.

Silva. A.; Soares, A.; Flores-Colen, I.; Brito, J. de (2016): "Mechanical characteristics of lightweight mortars on small-scale samples", Journal of Testing and Evaluation, V. 44, n.º 1, , January 2016.

Silva, A.; Vieira, S.; Brito, J. de; Gaspar, P. (2016): "Fuzzy systems in the service-life prediction of exterior natural stone claddings", Journal of Performance of Constructed Facilities, V. 30, n.º 5, art. 04016005, October 2016.

Silva, C.M.; Gomes, M.G.; Silva, M. (2016): "Green roofs energy performance in Mediterranean climate", Energy and Buildings, V. 116, 318-3285, March 2016.

Silva, J.V.; Ismael, R.; Carmo, R.N.F.; Lourenço, C.; Soldado, E.; Costa, H.; Júlio, E. (2016): "Influence of nano-SiO2 and nano-Al2O3 additions on the shear strength and the bending moment capacity of RC beams", Construction and Building Materials, V. 123, 45-56, October 2016.

Silva, P.R.; Brito, J. de (2016): "Durability performance of self-compacting concrete (SCC) with binary and ternary mixes of fly ash and limestone filler", Materials and Structures, V. 49, n.º 7, 2749-2766, July 2016.

Silva, R.V.; Brito, J. de; Dhir, R.K. (2016): "Establishing a relationship between modulus of elasticity and compressive strength of recycled aggregate concrete", Journal of Cleaner Production, V. 112, Part 4, 2171-2186, January 2016.

Silva, R.V.; Brito, J. de; Dhir, R.K. (2016): "Performance of cementitious renderings and masonry mortars containing recycled aggregates from construction and demolition wastes", Construction and Building Materials, V. 105, 400-415, February 2016.

Silva, R.V.; Brito, J. de; Evangelista, L.; Dhir, R.K. (2016): "Design of reinforced recycled aggregate concrete elements in conformity with Eurocode 2", Construction and Building Materials, V. 105, 144-156, February 2016.

Silva, R.V.; Silva, A.; Neves, R.; Brito, J. de (2016): "Statistical modeling of carbonation in concrete incorporating recycled aggregates", Journal of Materials in Civil Engineering, V. 28, n.º 1, 04015082, January 2016.

Silvestre, J.; Pargana, N.; Brito, J. de; Pinheiro, M.D.; Durão, V. (2016): "Insulation cork boards—Environmental life cycle assessment of an organic construction material", Materials, V. 9, n.º 5, art. 394, May 2016.

Silvestre, J.; Silvestre, N.; Brito, J. de (2016): "Polymer nanocomposites for structural applications: Recent trends and new perspectives", Mechanics of Advanced Materials and Structures, V. 23, n.º 11, 1263-1277, November 2016.

Silvestre, J.; Silvestre, N.; Brito, J. de (2016): "Review on concrete nanotechnology", European Journal of Environmental and Civil Engineering, V. 20, n.º 4, 455-485, April 2016.

Simões, A.; Bento, R.; Gago, A.; Lopes, M. (2016): "Mechanical characterization of masonry walls with flat-jack tests", Experimental Techniques, V. 40, n.º 3, 1163-1178, June 2016.

Sousa, J.M.; Correia, J.R.; Cabral-Fonseca, S. (2016): "Durability of glass fibre reinforced polymer pultruded profiles: comparison between quv accelerated exposure and natural weathering in a mediterranean climate", Experimental Techniques, V. 40, n.º 1, 207-219, February 2016.

Sousa, V.; Pereira, T.; Meireles, I. (2016): "Modeling the degradation rate of the wood frame doors and windows of the National Palace of Sintra, Portugal", Journal of Performance of Constructed Facilities, V. 30, n.º 2, art. 04015010, April 2016.

Sutherland, L.S.; Sá, M.F.; Correia, J.R.; Guedes Soares, C.; Gomes, A.; Silvestre, N. (2016): "Quasi-static indentation response of pedestrian bridge multicellular pultruded GFRP deck panels", Construction and Building Materials, V. 118, 307-318, August 2016.

Torres-Goméz, A.I.; Ledesma, E.F.; Otero, R.; Fernández, J.M.; Jiménez, J.R.; Brito, J. de (2016): "Combined effects of non-conforming fly ash and recycled masonry aggregates on mortar properties", Materials, V. 9, n.º 9, art. 729, , September 2016.

Trino, A.S.M.; Costa, C.S.M.F.; Fonseca, A.C.; Barata, I.; Júlio, E.; Serra, A.C.; Coelho, J.F.J. (2016): "Novel composites from green unsaturated polyesters and fly ashes: Preparation and characterization", Reactive and Functional Polymers, V. 106, 24-31, September 2016.

Valarinho, L.; Correia, J.R.; Machado-e-Costa, M.; Branco, F.A.; Silvestre, N. (2016): "Lateral-torsional buckling behaviour of long-span laminated glass beams: Analytical, experimental and numerical study", Materials & Design, V. 102, 264-275, July 2016.

Varandas, J.N.; Hölscher, P.; Silva, M.A.G. (2016): "Three-dimensional track-ballast interaction model for the study of a culvert transition", Soil Dynamics and Earthquake Engineering, V. 89, 116-127, October 2016.

Vieira, T.; Alves, A.; Brito, J. de; Correia, J.R.; Silva, R.V. (2016): "Durability-related performance of concrete containing fine recycled aggregates from crushed bricks and sanitary ware", Materials & Design, V. 90, 767-776, January 2016.

Ximenes, S.; Silva, A.; Soares, A.; Flores-Colen, I.; Brito, J. de (2016): "Parametric analysis to study the influence of aerogel-based renders’ components on thermal and mechanical performance", Materials, V. 9, n.º 5, 336, May 2016.

2015 (incompleto)

Agwa, M.A.; Pinto da Costa, A. (2015): "Using symbolic computation in the characterization of frictional instabilities involving orthotropicmaterials", International Journal of Applied Mathematics and Computer Science, V. 25, n.º 2, 259-267, June 2015.

Almeida, N.M.; Sousa, V.; Dias, L.A.; Branco, F. (2015): "Engineering risk management in performance-based building environments", Journal of Civil Engineering and Management, V. 21, n.º 2, 218-230, February 2015.

Almeida, N.M.; Sousa, V.; Dias, L.A.; Branco, F. (2015): "Managing the technical risk of performance-based building structures", Journal of Civil Engineering and Management, V. 21, n.º 3, 384-394, April 2015.

Arantes, A.; Ferreira, L.M.; Costa, A.A. (2015): "Is the construction industry aware of supply chain management? The Portuguese contractors’ perspective", Supply Chain Management: An International Journal, V. 20, n.º 4, 404-414, June 2015.

Areias, P.; César de Sá, J.M.; Cardoso, R. (2015): "A simple assumed-strain quadrilateral shell element for finite strains and fracture", Engineering with Computers, V. 31, n.º 4, 691-709, October 2015.

Areias, P.; Rabczuk, T.; César de Sá, J. (2015): "A finite strain quadrilateral based on least-squares assumed strains", Engineering Structures, V. 100, 1-16, October 2015.

Areias, P.; Rabczuk, T.; César de Sá, J. (2015): "Semi-implicit finite strain constitutive integration of porous plasticity models", Finite Elements in Analysis and Design, V. 104, 41-55, October 2015.

Areias, P.; Rabczuk, T.; César de Sá, J.; Garção, J.E. (2015): "Finite strain quadrilateral shell using least-squares fit of relative Lagrangian in-plane strains", Finite Elements in Analysis and Design, V. 98, 26-40, June 2015.

Areias, P.; Rabczuk, T.; César de Sá, J.; Natal Jorge, R. (2015): "A semi-implicit finite strain shell algorithm using in-plane strains based on least-squares", Computational Mechanics, V. 55, n.º 4, 673-696, April 2015.

Areias, P.; Rabczuk, T.; Queirós de Melo, F.J.M.; César de Sá, J. (2015): "Coulomb frictional contact by explicit projection in the cone for finite displacement quasi-static problems", Computational Mechanics, V. 55, n.º 1, 57-72, January 2015.

Areias, P.; Reinoso, J.; Camanho, P.; Rabczuk, T. (2015): "A constitutive-based element-by-element crack propagation algorithm with local mesh refinement", Computational Mechanics, V. 56, n.º 2, 291-315, August 2015.

Arruda, P.F.T.; Arruda, M.R.T.; Castro, L,M.S. (2015): "Computation of critical loads and buckling modes using hybrid-mixed stress finite element models", Computers & Structures, V. 154, 72-90, July 2015.

Baltazar, L.; Santana, J.; Lopes, B.; Correia, J.R.; Rodrigues, M.P. (2015): "Superficial protection of concrete with epoxy resin impregnations: influence of the substrate roughness and moisture", Materials and Structures, V. 48, n.º 6, 1931-1946, June 2015.

Basaglia, C.; Camotim, D. (2015): "Buckling analysis of thin-walled steel structural systems using Generalized Beam Theory (GBT)", International Journal of Structural Stability and Dynamics, V. 15, n.º 1, 1540004, January 2015.

Basaglia, C.; Camotim, D.; Silvestre, N. (2015): "Buckling and vibration analysis of cold-formed steel CHS members and frames using Generalized Beam Theory", International Journal of Structural Stability and Dynamics, V. 15, n.º 8, 1540021, December 2015.

Bebiano, R.; Gonçalves, R.; Camotim, D. (2015): "A cross-section analysis procedure to rationalise and automate the performance of GBT-based structural analyses", Thin-Walled Structures, V. 92, 29-47, July 2015.

Biscaia, H.C.; Chastre, C.; Silva, M.A.G. (2015): "Bond-slip model for FRP-to-concrete bonded joints under external compression", Composites Part B: Engineering, V. 80, 246-259, October 2015.

Bogas, J.A.; Brito, J. de; Figueiredo, J.M. (2015): "Mechanical characterization of concrete produced with recycled lightweight expanded clay aggregate concrete", Journal of Cleaner Production, V. 89, 187-195, February 2015.

Bogas, J.A.; Gomes, A. (2015): "Non-steady-state accelerated chloride penetration resistance of structural lightweight aggregate concrete", Cement and Concrete Composites, V. 60, 111-122, July 2015.

Bogas, J.A.; Gomes, M.G.; Real, S. (2015): "Capillary absorption of structural lightweight aggregate concrete", Materials and Structures, V. 48, n.º 9, 2869-2883, September 2015.

Bogas, J.A.; Gomes, T. (2015): "Mechanical and durability behaviour of structural lightweight concrete produced with volcanic scoria", Arabian Journal for Science and Engineering, V. 40, n.º 3, 705-717, March 2015.

Bravo, M.; Brito, J. de; Pontes, J.; Evangelista, L. (2015): "Durability performance of concrete with recycled aggregates from construction and demolition waste plants", Construction and Building Materials, V. 77, 357-369, February 2015.

Bravo, M.; Brito, J. de; Pontes, J.; Evangelista, L. (2015): "Mechanical performance of concrete made with aggregates from construction and demolition waste recycling plants", Journal of Cleaner Production, V. 99, 59-74, July 2015.

Camacho-Tauta. J.; Cascante, G.; Viana da Fonseca, A.; Santos, J.A. (2015): "Time and frequency domain evaluation of bender element systems", Géotechnique, V. 66, n.º 7, 548-562, July 2015.

Carmo, R.N.F.; Dias-da-Costa, D. (2015): "Tensile and flexural behaviour of LWAC members under short-term service loads", Engineering Structures, V. 92, 142-155, June 2015.

Carmo, R.N.F.; Valença, J.; Silva, D.; Dias-da-Costa, D. (2015): "Assessing steel strains on reinforced concrete members from surface cracking patterns", Construction and Building Materials, V. 98, 266-275, November 2015.

Carro-López, D.; González-Fonteboa, B.; Brito, J. de; Martínez-Abella, F.; González-Taboada, I.; Silva, P. (2015): "Study of the rheology of self-compacting concrete with fine recycled concrete aggregates", Construction and Building Materials, V. 96, 491-501, October 2015.

Cartuxo, F.; Brito, J. de; Evangelista, L.; Jiménez, J.R.; Ledesma, E.F. (2015): "Rheological behaviour of concrete made with fine recycled concrete aggregates – Influence of the superplasticizer", Construction and Building Materials, V. 89, 36-47, August 2015.

Castro Jorge, P.; Pinto da Costa, A.; Simões, F.M.F. (2015): "Finite element dynamic analysis of finite beams on a bilinear foundation under a moving load", Journal of Sound and Vibration, V. 346, 328-344, June 2015.

Castro Jorge, P.; Simões, F.M.F.; Pinto da Costa, A. (2015): "Dynamics of beams on non-uniform nonlinear foundations subjected to moving loads", Computers & Structures, V. 148, 26-34, February 2015.

Chai, C.; Brito, J. de; Gaspar, P.L.; Silva, A. (2015): "Statistical modelling of the service life prediction of painted surfaces", International Journal of Strategic Property Management, V. 19, n.º 2, 173-185, April 2015.

Challamel, N.; Camotim, D.; Wang, C.M.; Zhang, Z. (2015): "On lateral-torsional buckling of discrete elastic systems: A nonlocal approach", European Journal of Mechanics - A/Solids, V. 49, 106-113, January-February 2015.

Chang, S.-J.; Ferreira, A.M.G.; Ritsema, J.; van Heijst, H.J.; Woodhouse, J.H. (2015): "Joint inversion for global isotropic and radially anisotropic mantle structure including crustal thickness perturbations", Journal of Geophysical Research: Solid Earth, V. 120, 4278-4300, June 2015.

Correia, J.R.; Bai, Y.; Keller, T. (2015): "A review of the fire behaviour of pultruded GFRP structural profiles for civil engineering applications", Composite Structures, V. 127, 267-287, September 2015.

Cruz, C.O.; Brito, J. de (2015): "Role of public administration in fostering urban housing rehabilitation", Journal of Urban Planning and Development, V. 141, n.º 4, 06014002, December 2015.

Cruz, C.O.; Marques, R.; Franco, D. (2015): "Road-network development in quickly growing economies: Brazilian case study MG-050", Journal of Infrastructure Systems, V. 21, n.º 4, 05015002, December 2015.

Cruz, C.O.; Marques, R.C.; Pereira, I. (2015): "Alternative contractual arrangements for urban light rail systems: lessons from two case studies", Journal of Construction Engineering and Management, V. 141, n.º 3, 5014017, March 2015.

Dinis, P.B.; Camotim, D. (2015): "A novel DSM-based approach for the rational design of fixed-ended and pin-ended short-to-intermediate thin-walled angle columns", Thin-Walled Structures, V. 87, 158-182, February 2015.

Dinis, P.B.; Camotim, D. (2015): "Cold-formed steel columns undergoing local–distortional coupling: Behaviour and direct strength prediction against interactive failure", Computers & Structures, V. 147, 181-208, January 2015.

Duarte, A.P.C.; Silva, B.A.; Silvestre, N.; Brito, J. de; Júlio, E. (2015): "Mechanical characterization of rubberized concrete using an Image-Processing / XFEM coupled procedure", Composites Part B: Engineering, V. 78, 214-226, September 2015.

Edis, E.; Flores-Colen, I.; Brito, J. de (2015): "Building thermography: detection of delamination of adhered ceramic claddings using the passive approach", Journal of Nondestructive Evaluation, V. 34, n.º 1, 268, March 2015.

Edis, E.; Flores-Colen, I.; Brito, J. de (2015): "Quasi-quantitative infrared thermographic detection of moisture variation in facades with adhered ceramic cladding using principal component analysis", Building and Environment, V. 94, Part 1, 97-108, December 2015.

Edis, E.; Flores-Colen, I.; Brito, J. de (2015): "Time-dependent passive building thermography for detecting delamination of adhered ceramic cladding", Journal of Nondestructive Evaluation, V. 34, n.º 3, 24, September 2015.

Estêvão, J.M.C.; Oliveira, C.S. (2015): "A new analysis method for structural failure evaluation", Engineering Failure Analysis, V. 56, 573-584, October 2015.

Evangelista, L.; Guedes, M.; Brito, J. de; Ferro, A.C.; Pereira, M.F. (2015): "Physical, chemical and mineralogical properties of fine recycled aggregates made from concrete waste", Construction and Building Materials, V. 86, 178-188, July 2015.

Farinha, C.; Brito, J. de; Veiga, R. (2015): "Incorporation of fine sanitary ware aggregates in coating mortars", Construction and Building Materials, V. 83, 194-206, May 2015.

Fernandes, L.A.; Gonilha, J.; Correia, J.R.; Silvestre, N.; Nunes, F. (2015): "Web-crippling of GFRP pultruded profiles. Part 1: Experimental study", Composite Structures, V. 120, 565-577, February 2015.

Fernandes, L.A.; Nunes, F.; Silvestre, N.; Correia, J.R.; Gonilha, J. (2015): "Web-crippling of GFRP pultruded profiles. Part 2: Numerical analysis and design", Composite Structures, V. 120, 578-590, February 2015.

Ferreira, J.G.; Branco, F. (2015): "Measurement of vertical deformations in bridges using an innovative elastic cell system", Experimental Techniques, V. 39, n.º 4, 13-20, July/August 2015.

Ferreira, L.; Branco, F.G.; Costa, H.S.S.; Júlio, E.; Maranha, P. (2015): "Characterization of alkali-activated binders using the maturity method", Construction and Building Materials, V. 95, 337-344, October 2015.

Firmo, J.P.; Arruda, M.R.T.; Correia, J.R. (2015): "Numerical simulation of the fire behaviour of thermally insulated reinforced concrete beams strengthened with EBR-CFRP strips", Composite Structures, V. 126, 360-370, August 2015.

Firmo, J.P.; Arruda, M.R.T.; Correia, J.R.; Tiago, C. (2015): "Flexural behaviour of partially bonded carbon fibre reinforced polymers strengthened concrete beams: application to fire protection systems design", Materials & Design, V. 65, 1064-1074, January 2015.

Firmo, J.P.; Correia, J.R. (2015): "Fire behaviour of thermally insulated RC beams strengthened with EBR-CFRP strips: experimental study", Composite Structures, V. 122, 144-154, April 2015.

Firmo, J.P.; Correia, J.R. (2015): "Fire behaviour of thermally insulated RC beams strengthened with NSM-CFRP strips: experimental study", Composites Part B: Engineering, V. 76 , 112-121, July 2015.

Firmo, J.P.; Correia, J.R.; Bisby, L. (2015): "Fire behaviour of FRP-strengthened reinforced concrete structural elements: a state-of-the-art review", Composites Part B: Engineering, V. 80, 198-216, October 2015.

Firmo, J.P.; Correia, J.R.; Pitta, D.; Tiago, C.; Arruda, M.R.T. (2015): "Bond behavior between near-surface-mounted CFRP strips and concrete at high temperatures", Journal of Composites for Construction, V. 19, n.º 4, 04014071, August 2015.

Firmo, J.P.; Correia, J.R.; Pitta, D.; Tiago, C.; Arruda, M.R.T. (2015): "Experimental characterization of the bond between externally bonded reinforcement (EBR) CFRP strips and concrete at elevated temperatures", Cement and Concrete Composites, V. 60, 44-54, July 2015.

Freire, L.M.R.; Brito, J. de; Correia, J.R. (2015): "Inspection survey of support bearings in road bridges", Journal of Performance of Constructed Facilities, V. 29, n.º 4, 04014098, August 2015.

Freire, M.T.; Santos Silva, A.; Veiga, M.R.; Brito, J. de (2015): "The history of Portuguese interior plaster coatings: A mineralogical survey using XRD", Archaeometry, V. 57, Issue Supplement S1, 147-165, July 2015.

Freitas, J.A.T.; Cuong, P.T.; Faria, R. (2015): "Modeling of cement hydration in high performance concrete structures with hybrid finite elements", International Journal for Numerical Methods in Engineering, V. 103, n.º 5, 364-390, August 2015.

Freitas, P.; Guedes, M.C. (2015): "The use of windows as environmental control in “Baixa Pombalina's heritage buildings", Renewable Energy, V. 73, 92-98, January 2015.

Garcez, N.; Lopes, N.; Brito, J. de; Sá, G.; Silvestre, J.D. (2015): "Influence of design on the service life of pitched roofs' cladding", Journal of Performance of Constructed Facilities, V. 29, n.º 3, 04014073, June 2015.

Garrido, M.; Correia, J.R.; Keller, T. (2015): "Effects of elevated temperature on the shear response of PET and PUR foams used in composite sandwich panels", Construction and Building Materials, V. 76 , 150-157, February 2015.

Garrido, M.; Correia, J.R.; Keller, T.; Branco, F. (2015): "Adhesively bonded connections between composite sandwich floor panels for building rehabilitation", Composite Structures, V. 134, 255-268, December 2015.

Ghafari, E.; Arezoumandi, M.; Costa, H.; Júlio, E.N.B.S. (2015): "Influence of nano-silica addition in the durability of UHPC", Construction and Building Materials, V. 94, 181-188, September 2015.

Ghafari, E.; Bandarabadi, M.; Costa, H.; Júlio, E. (2015): "Prediction of fresh and hardened state properties of UHPC: Comparative study of statistical mixture design and an artificial neural network model", Journal of Materials in Civil Engineering, V. 27, n.º 11, 04015017, November 2015.

Ghafari, E.; Costa, H.; Júlio, E.N.B.S. (2015): "Critical review on eco-efficient ultra high performance concrete enhanced with nano-materials", Construction and Building Materials, V. 101, Part 1, 201-208, December 2015.

Ghafari, E.; Júlio, E.N.B.S.; Costa, H. (2015): "Statistical mixture design approach for eco-efficient UHPC", Cement and Concrete Composites, V. 55, 17-25, January 2015.

Gomes, R.C.; Gouveia, F.; Torcato, D.; Santos, J. (2015): "Seismic response of shallow circular tunnels in two-layered ground", Soil Dynamics and Earthquake Engineering, V. 75, 37-43, August 2015.

Gonçalves, A.; Brito, J. de; Amaro, B. (2015): "Systematic approach to inspect, diagnose, and repair masonry walls", Journal of Performance of Constructed Facilities, V. 29, n.º 6, 04014155, December 2015.

Gonçalves, R.; Camotim, D. (2015): "On distortion of symmetric and periodic open-section thin-walled members", Thin-Walled Structures, V. 94, 314-324, September 2015.

Gonçalves, R.; Peres, N.; Bebiano, R.; Camotim, D. (2015): "Global–local-distortional vibration of thin-walled rectangular multi-cell beams", International Journal of Structural Stability and Dynamics, V. 15, n.º 8, 1540022, December 2015.

Henriques, D.; Gonçalves, R.; Camotim, D. (2015): "A physically non-linear GBT-based finite element for steel and steel-concrete beams including shear lag effects", Thin-Walled Structures, V. 90, 202-215, May 2015.

Inácio, M.; Almeida, A.; Faria, D.; Lúcio, V.; Ramos, A.P. (2015): "Punching of high strength concrete flat slabs without shear reinforcement", Engineering Structures, V. 103, 275-284, November 2015.

Ivannikov, V.; Tiago, C.; Pimenta, P.M. (2015): "Generalization of the C1 TUBA plate finite elements to the geometrically exact Kirchhoff–Love shell model", Computer Methods in Applied Mechanics and Engineering, V. 294, 210-244, September 2015.

Kohrangi, M.; Bento, R.; Lopes, M. (2015): "Seismic performance of irregular bridges – comparison of different nonlinear static procedures", Structure and Infrastructure Engineering: Maintenance, Management, Life-Cycle Design and Performance, V. 11, n.º 12, 1632-1650, December 2015.

Landesmann, A.; Camotim, D. (2015): "DSM to predict distortional failures in cold-formed steel columns exposed to fire: Effect of the constitutive law temperature-dependence", Computers & Structures, V. 147, 47-67, January 2015.

Laranjeira, J.P.S.; Cruz, H.; Pinto, A.P.F.; Santos, C.P.; Pereira, J.F. (2015): "Reaction to fire of existing timber elements protected with fire retardant treatments: experimental assessment", International Journal of Architectural Heritage: Conservation, Analysis, and Restoration, V. 9, n.º 7, 866-882, October 2015.

Ledesma, E.F.; Jiménez, J.R.; Ayuso, J.; Fernández, J.M.; Brito, J. de (2015): "Maximum feasible use of recycled sand from construction and demolition waste for eco-mortar production - Part-I: ceramic masonry waste", Journal of Cleaner Production, V. 87, 692-706, January 2015.

Lemos, J.V.; Oliveira, C.S.; Navarro, M. (2015): "3-D nonlinear behavior of an obelisk subjected to the Lorca May 11, 2011 strong motion record", Engineering Failure Analysis, V. 58, Part 1, 212-228, December 2015.

Lobo, P.S.; Almeida, J. (2015): "RC fiber beam–column model with bond-slip in the vicinity of interior joints", Engineering Structures, V. 96, 78-87, August 2015.

Lopes, A.C.; Flores-Colen, I.; Silva, L. (2015): "Variability of the pull-off technique for adhesion strength evaluation on ceramic tile claddings", The Journal of Adhesion, V. 91, n.º 10-11, 768-791, October 2015.

López-Comino, J.A.; Stich, D.; Ferreira, A.M.G.; Morales, J. (2015): "Extended fault inversion with random slipmaps: a resolution test for the 2012 Mw 7.6 Nicoya, Costa Rica earthquake", Geophysical Journal International, V. 202, n.º 3, 77-93, September 2015.

Lourenço, J.; Simões, F.M.F.; Rego, P.A. (2015): "Finite element analyses of femoroacetabular impingement before and after hip arthroscopy", Bio-Medical Materials and Engineering, V. 26, n.º 3-4, 193-206, December 2015.

Marques, B.A.; Brito, J. de; Correia, J.R. (2015): "Constructive characteristics and degradation condition of Liceu secondary schools in Portugal", International Journal of Architectural Heritage: Conservation, Analysis, and Restoration, V. 9, n.º 7, 896-911, October 2015.

Marques da Silva, F.; Gomes, M.G.; Moret Rodrigues, A. (2015): "Measuring and estimating airflow in naturally ventilated double skin facades", Building and Environment, V. 87, 292-301, May 2015.

Martins, A.D.; Dinis, P.B.; Camotim, D.; Providência, P. (2015): "On the relevance of local–distortional interaction effects in the behaviour and design of cold-formed steel columns", Computers & Structures, V. 160, 57-89, November 2015.

Martins, J.; Marques, R.; Cruz, C.O. (2015): "Real options in infrastructure: revisiting the literature", Journal of Infrastructure Systems, V. 21, n.º 1, 04014026, March 2015.

Martins, J.P.; Beg, D.; Sinur, F.; Simões da Silva, L.; Reis, A. (2015): "Imperfection sensitivity of cylindrically curved steel panels", Thin-Walled Structures, V. 89, 101-115, April 2015.

Mateus, L.; Veiga, M.R.; Brito, J. de (2015): "In situ characterization of rammed earth wall renders", International Journal of Architectural Heritage, V. 9, n.º 4, 430-442, May 2015.

Menezes, A.; Gomes, M.G.; Flores-Colen, I. (2015): "In-situ assessment of physical performance and degradation analysis of rendering walls", Construction and Building Materials, V. 75, 283-292, January 2015.

Milosevic, J.; Lopes, M.; Gago, A.S.; Bento, R. (2015): "In-plane seismic response of rubble stone masonry specimens by means of static cyclic tests", Construction and Building Materials, V. 82, 9-19, May 2015.

Moldovan, I.D. (2015): "A new particular solution strategy for hyperbolic boundary value problems using hybrid-Trefftz displacement elements", International Journal for Numerical Methods in Engineering, V. 102, n.º 6, 1293-1315, May 2015.

Morgado, T.; Correia, J.R.; Moreira, A.; Branco, F.A.; Tiago, C. (2015): "Experimental study on the fire resistance of GFRP pultruded tubular columns", Composites Part B: Engineering, V. 69, 201-211, February 2015.

Msekh, M.A.; Sargado, J.M.; Jamshidian, M.; Areias, P.M.; Rabczuk, T. (2015): "Abaqus implementation of phase-field model for brittle fracture", Computational Materials Science, V. 96, Part B, 472-484, January 2015.

Neto, P.; Alfaiate, J.; Valarinho, L.; Correia, J.R.; Branco, F.A.; Vinagre, J. (2015): "Glass beams reinforced with GFRP laminates: Experimental tests and numerical modelling using a discrete strong discontinuity approach", Engineering Structures, V. 99, 253-263, September 2015.

Neves, R.; Sena da Fonseca, B.; Branco, F.; Brito, J. de; Castela, A.; Montemor, M.F. (2015): "Assessing concrete carbonation resistance through air permeability measurements", Construction and Building Materials, V. 82, 304-309, May 2015.

Nguyen-Thanh, N.; Valizadeh, N.; Nguyen, M.N.; Nguyen-Xuan, H.; Zhuang, X.; Areias, P.; Zi, G.;Bazilevs, Y.; De Lorenzis, L.; Rabczuk, T. (2015): "An extended isogeometric thin shell analysis based on Kirchhoff–Love theory", Computer Methods in Applied Mechanics and Engineering, V. 284, 265-291, February 2015.

Oliveira, C.S.; Mota de Sá, F.; Lopes, M.; Ferreira, M.A.; Pais, I. (2015): "Early warning systems: feasibility and end-users' point of view", Pure and Applied Geophysics, V. 172, n.º 9, 2353-2370, September 2015.

Oliveira, R.; Brito, J. de; Veiga, R. (2015): "Reduction of the cement content in rendering mortars with fine glass aggregates", Journal of Cleaner Production, V. 95, 75-88, May 2015.

Pacheco, J.; Brito, J. de; Ferreira, J.; Soares, D. (2015): "Flexural load tests of full-scale recycled aggregates concrete structures", Construction and Building Materials, V. 101, Part 1, 65-71, December 2015.

Pargana, J.B.; Leitão, V.M.A. (2015): "A simplified stress–strain model for coated plain-weave fabrics used in Tensioned Fabric Structures", Engineering Structures, V. 84, 439-450, February 2015.

Parisi, L.; Ferreira, A.M.G.; Capdeville, Y. (2015): "Validity domain of the Born approximation for seismic waveform modelling in realistic 3-D Earth structure", Geophysical Journal International, V. 200, n.º 2, 910-916, February 2015.

Pedro, D.; Brito, J. de; Evangelista, L. (2015): "Performance of concrete made with aggregates recycled from precasting industry waste: influence of the crushing process", Materials and Structures, V. 48, n.º 12, 3965-3978, December 2015.

Pereira, C.; Brito, J. de, Correia, J.R. (2015): "Building characterization and degradation condition of secondary industrial schools", Journal of Performance of Constructed Facilities, V. 29, n.º 5, 04014128, October 2015.

Pinho, F.F.S.; Lúcio, V.J.G.; Baião, M.F.C. (2015): "Rubble stone masonry walls strengthened by three-dimensional steel ties and textile-reinforced mortar render, under compression and shear loads", International Journal of Architectural Heritage: Conservation, Analysis, and Restoration, V. 9, n.º 7, 844-858, October 2015.

Pires, R.; Brito, J. de; Amaro, B. (2015): "Inspection, diagnosis and rehabilitation system of painted rendered façades", Journal of Performance of Constructed Facilities, V. 29, n.º 2, 04014062, April 2015.

Pires, R.; Brito, J. de; Amaro, B. (2015): "Statistical survey of the inspection, diagnosis and repair of painted rendered façades", Structure and Infrastructure Engineering: Maintenance, Management, Life-Cycle Design and Performance, V. 11, n.º 5, 605-618, May 2015.

Procaci, T.B.; Siqueira, S.W.M.; Braz, M.H.L.; Andrade, L.C.V. (2015): "How to find people who can help to answer a question? – Analyses of metrics and machine learning in online communities", Computers in Human Behavior, V. 51, Part B, 664-673, October 2015.

Rao, S.; Silva, P.; Brito, J. de (2015): "Experimental study of the mechanical properties and durability of self-compacting mortars with nano materials (SiO₂ and TiO₂)", Construction and Building Materials, V. 96, 508-517, October 2015.

Real, S.; Bogas, J.A.; Pontes, J. (2015): "Chloride migration in structural lightweight aggregate concrete produced with different binders", Construction and Building Materials, V. 98, 425-436, November 2015.

Reis, N.; Brito, J. de; Correia, J.R.; Arruda, M.T. (2015): "Punching behaviour of concrete slabs incorporating coarse recycled concrete aggregates", Engineering Structures, V. 100, 238-248, October 2015.

Rodrigues, R.; Brito, J. de; Sardinha, M. (2015): "Mechanical properties of structural concrete containing very fine aggregates from marble cutting sludge", Construction and Building Materials, V. 77, 349-356, February 2015.

Santos, P.; Martins, C.; Júlio, E.N.B.S. (2015): "Enhancement of the thermal performance of perforated clay brick walls through the addition of industrial nano-crystalline aluminium sludge", Construction and Building Materials, V. 101, Part 1, 227-238, December 2015.

Silva, B.A.; Ferreira Pinto, A.P.; Gomes, A. (2015): "Natural hydraulic lime versus cement for blended lime mortars for restoration works", Construction and Building Materials, V. 94, 346-360, September 2015.

Silva, C.M.; Flores-Colen, I.; Coelho, A. (2015): "Green roofs in Mediterranean areas – Survey and maintenance planning", Building and Environment, V. 94, Part 1, 131-143, December 2015.

Silva, C.M.; Sousa, V.; Carvalho, N.V. (2015): "Evaluation of rainwater harvesting in Portugal: Application to single-family residences", Resources, Conservation and Recycling, V. 94, 21-34, January 2015.

Silva, M.V.; Castro, L.M.S.; Pereira, E. (2015): "On the parallel implementation of a hybrid-mixed stress formulation", Computers & Structures, V. 158, 71-81, October 2015.

Silva, P.R.; Brito, J. de (2015): "Experimental study of the porosity and microstructure of self-compacting concrete (SCC) with binary and ternary mixes of fly ash and limestone filler", Construction and Building Materials, V. 86, 102-112, July 2015.

Silva, R.V.; Brito, J. de; Dhir, R.K. (2015): "Comparative analysis of existing prediction models on the creep behaviour of recycled aggregate concrete", Engineering Structures, V. 100, 31-42, October 2015.

Silva, R.V.; Brito, J. de; Dhir, R.K. (2015): "Prediction of the shrinkage behavior of recycled aggregate concrete: A review", Construction and Building Materials, V. 77, 327-339, February 2015.

Silva, R.V.; Brito, J. de; Dhir, R.K. (2015): "Tensile strength behaviour of recycled aggregate concrete", Construction and Building Materials, V. 83, 108-118, May 2015.

Silva, R.V.; Brito, J. de; Dhir, R.K. (2015): "The influence of the use of recycled aggregates on the compressive strength of concrete: a review", European Journal of Environmental and Civil Engineering, V. 19, n.º 7, 825-849, August 2015.

Silva, R.V.; Brito, J. de; Neves, R.; Dhir, R. (2015): "Prediction of chloride ion penetration of recycled aggregate concrete", Materials Research - Ibero-american Journal of Materials, V. 18, n.º 2, 427-440, May 2015.

Silva, P.R.; Neves, R.; Brito, J. de; Dhir, R.K. (2015): "Carbonation behaviour of recycled aggregate concrete", Cement and Concrete Composites, V. 62, 22-32, September 2015.

Silvestre, J.D.; Lasvaux, S.; Hodková, J.; Brito, J. de; Pinheiro, M.D. (2015): "NativeLCA - a systematic approach for the selection of environmental datasets as generic data: application to construction products in a national context", The International Journal of Life Cycle Assessment, V. 20, n.º 6, 731-750, June 2015.

Silvestre, J.D.; Silva, A.; Brito, J. de (2015): "Uncertainty modelling of service life and environmental performance to reduce risk in building design decisions", Journal of Civil Engineering and Management, V. 21, n.º 3, 308-322, March 2015.

Simões, A.; Milošević, J.; Meireles, H.; Bento, R.; Cattari, S.; Lagomarsino, S. (2015): "Fragility curves for old masonry building types in Lisbon", Bulletin of Earthquake Engineering, V. 13, n.º 10, 3083-3105, October 2015.

Soares, A.; Flores-Colen, I.; Brito, J. de (2015): "Influence of slenderness on the compressive strength evaluation of cores of renders", Materials and Structures, V. 48, n.º 5, 1449-1460, May 2015.

Soares, A.; Flores-Colen, I.; Brito, J. de (2015): "Use of non-standard specimens to study the compressive strength of multi-coat renders", Journal of Testing and Evaluation, V. 43, n.º 5, 1055-1065, September 2015.

Sousa, V.; Almeida, N.M.; Dias, L.A. (2015): "Risk-based management of occupational safety and health in the construction industry – Part 2: Quantitative model", Safety Science, V. 74, 184-194, April 2015.

Tavares, M.; Pinto da Costa, A.; Simões, F.M.F. (2015): "Assessing aerodynamic flutter instability in prismatic structures with rectangular cross sections", Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, V. 31, n.º 1, 27-35, January-March 2015.

Tomé, A.; Kuipers, M.; Pinheiro, T.; Nunes, M.; Heitor, T. (2015): "Space–use analysis through computer vision", Automation in Construction, V. 57, 80-97, September 2015.

Tostões, A. (2015): "Towards a new monumentality: The creation of an urban cultural landscape", Architektura a Urbanizmus, V. 49, n.º 3-4, 240-257, 2015.

Tuna, J.; Feiteira, J.; Flores-Colen, I.; Pereira, M.; Brito, J. de (2015): "In situ characterization of damaging soluble salts in wall construction materials", Journal of Performance of Constructed Facilities, V. 29, n.º5, 04014127, October 2015.

Valença, J.; Almeida, C.; Botas, J.; Júlio, E.N.B.S. (2015): "Patch Restoration Method: A new concept for concrete heritage", Construction and Building Materials, V. 101, Part 1, 643-651, December 2015.

Vaz Rodrigues, R. (2015): "A new technique for ultimate limit state design of arbitrary shape RC sections under biaxial bending", Engineering Structures, V. 104, 1-17, December 2015.

Vieira, R.F.; Virtuoso, F.B.E.; Pereira, E.B.R. (2015): "A higher order beam model for thin-walled structures with in-plane rigid cross-sections", Engineering Structures, V. 84, 1-18, February 2015.

Vieira, R.F.; Virtuoso, F.B.E.; Pereira, E.B.R. (2015): "Definition of warping modes within the context of a higher order thin-walled beam model", Computers & Structures, V. 147, 68-78, January 2015.

Vieira, S.M.; Silva, A.; Sousa, J.M.C.; Brito, J. de; Gaspar, P.L. (2015): "Modelling the service life of rendered facades using fuzzy systems", Automation in Construction, V. 51, 1-7, March 2015.

Ximenes, S.; Brito, J. de; Gaspar, P.L.; Silva, A. (2015): "Modelling the degradation and service life of ETICS in external walls", Materials and Structures, V. 48, n.º 7, 2235-2249, July 2015.

Zürn, W.; Ferreira, A.M.G.; Widmer-Schnidrig, R.; Lentas, K.; Rivera, L.; Clévédé, E. (2015): "High-quality lowest-frequency normal mode strain observations at the Black Forest Observatory (SW-Germany) and comparison with horizontal broad-band seismometer data and synthetics", Geophysical Journal International, V. 203, n.º 3, 1786-1803, December 2015.

2014

Abambres, M.; Camotim, D.; Silvestre, N. (2014): "GBT-based elastic–plastic post-buckling analysis of stainless steel thin-walled members", Thin-Walled Structures, V. 83, pp. 85-102, October 2014.

Abambres, M.; Camotim, D.; Silvestre, N. (2014): "Modal decomposition of thin-walled member collapse mechanisms", Thin-Walled Structures, V. 74, pp. 269-291, January 2014.

Abambres, M.; Camotim, D.; Silvestre, N.; Rasmussen, K.J.R. (2014): "GBT-based structural analysis of elastic–plastic thin-walled members", Computers & Structures, V. 136, pp. 1-23, May 2014.

Alves, A.V.; Vieira, T.F.; Brito, J. de; Correia, J.R. (2014): "Mechanical properties of structural concrete with fine recycled ceramic aggregates", Construction and Building Materials, V. 64, pp. 103-113, August 2014.

Amaro, B.; Saraiva, D.; Brito, J. de; Flores-Cohen, I. (2014): "Statistical survey of the pathology, diagnosis and rehabilitation of ETICS in walls", Journal of Civil Engineering and Management, V. 20, n.º 4, pp. 511-526, July 2014.

André, A.; Brito, J. de; Rosa, A.; Pedro, D. (2014): "Durability performance of concrete incorporating coarse aggregates from marble industry waste", Journal of Cleaner Production, V. 65, pp. 389-396, February 2014.

Areias, P.; Pinto da Costa, A.; Rabczuk, T.; Queirós de Melo, F.J.M.; Dias-da-Costa, D.; Bezzeghoud, M. (2014): "An alternative formulation for quasi-static frictional and cohesive contact problems", Computational Mechanics, V. 53, n.º 4, pp. 807-824, April 2014.

Areias, P.; Rabczuk, T.; Barbosa, J.I. (2014): "The extended unsymmetric frontal solution for multiple-point constraints", Engineering Computations, V. 31, n.º 7, pp. 1582-1607, October 2014.

Areias, P.; Rabczuk, T.; Camanho, P.P. (2014): "Finite strain fracture of 2D problems with injected anisotropic softening elements", Theoretical and Applied Fracture Mechanics, V. 72, pp. 50-63, August 2014.

Baltazar, L.; Santana, J.; Lopes, B.; Rodrigues, M.P.; Correia, J.R. (2014): "Surface skin protection of concrete with silicate-based impregnations: Influence of the substrate roughness and moisture", Construction and Building Materials, V. 70, pp. 191-200, November 2014.

Barata, I.; Fonseca, A.C.; Costa, C.S.M.F.; Ferreira, L.; Júlio, E.; Coelho, J.F.J. (2014): "Insights into the thermo-mechanical properties of films cast from emulsion terpolymers", Progress in Organic Coatings, V. 77, n.º 4, pp. 790-797, April 2014.

Basaglia, C.; Camotim, D.; Coda, H. (2014): "Behaviour, failure and DSM design of cold-formed steel beams: Influence of the load point of application", Thin-Walled Structures, V. 81, pp. 78-88, August 2014.

Bhatt, C.; Bento, R. (2014): "The extended adaptive capacity spectrum method for the seismic assessment of plan-asymmetric buildings", Earthquake Spectra, V. 30, n.º 2, pp. 683-703, May 2014.

Bogas, J.A.; Brito, J. de; Cabaço, J. (2014): "Long-term behaviour of concrete produced with recycled lightweight expanded clay aggregate concrete", Construction and Building Materials, V. 65, pp. 470-479, August 2014.

Bogas, J.A.; Gomes, A. (2014): "Static and dynamic modulus of elasticity of structural lightweight and modified density concrete with and without nanosilica – characterization and normalization", International Journal of Civil Engineering (Transaction A: Civil Engineering), V. 12, n.º 2, pp. 269-279, June 2014.

Bogas, J.A.; Gomes, M.G.; Real, S. (2014): "Bonding of steel reinforcement in structural expanded clay lightweight aggregate concrete: The influence of failure mechanism and concrete composition", Construction and Building Materials, V. 65, pp. 350-359, August 2014.

Bogas, J.A.; Nogueira, R. (2014): "Tensile strength of structural expanded clay lightweight concrete subjected to different curing conditions", KSCE Journal of Civil Engineering, V. 18, n.º 6, pp. 1780-1791, September 2014.

Bogas, J.A.; Nogueira, R.; Almeida, N.G. (2014): "Influence of mineral additions and different compositional parameters on the shrinkage of structural expanded clay lightweight concrete", Materials & Design, V. 56, pp. 1039-1048, April 2014.

Braga, M.; Brito, J. de; Veiga, R. (2014): "Reduction of the cement content in mortars made with fine concrete aggregates", Materials and Structures, V. 47, n.º 1-2, pp. 171-182, January 2014.

Branco, M.; Gonçalves, A.; Guerreiro, L.; Ferreira, J. (2014): "Cyclic behavior of composite timber-masonry wall in quasi-dynamic conditions reinforced with superelastic damper", Construction and Building Materials, V. 52, pp. 166-176, February 2014.

Branco, M.; Guerreiro, L.; Campos Costa, A.; Candeias, P. (2014): "Shaking table tests of a structure equipped with superelastic dampers", Journal of Earthquake Engineering, V 18, n.º 5, pp. 674-695, July 2014.

Camotim, D.; Basaglia, C. (2014): "On the behaviour, failure and direct strength design of thin-walled steel structural systems", Thin-Walled Structures, V. 81, pp. 50-66, August 2014.

Carmo, R.N.F.; Costa, H.; Bento, G. (2014): "Experimental investigation of bond stress and deformation of LWAC ties reinforced with GFRP bars", Strain, V. 50, n.º 4, pp. 318-333, August 2014.

Castela, A.S.; Fonseca, B.S.; Duarte, R.G.; Neves, R.; Montemor, R.F. (2014): "Influence of unsupported concrete media in corrosion assessment for steel reinforcing concrete by electrochemical impedance spectroscopy", Electrochimica Acta, V. 124, pp. 52-60, April 2014.

Chai, C.; Brito, J. de; Gaspar, P.L.; Silva, A. (2014): "Predicting the service life of exterior wall painting: techno-economic analysis of alternative maintenance strategies", Journal of Construction Engineering and Management, V. 140, n.º 3, pp. , March 2014.

Correia, J.R.; Arruda, M.R.T.; Branco, F.A. (2014): "Structural assessment of reinforced concrete arch underpasses subjected to vehicular overloads", Journal of Performance of Constructed Facilities, V. 28, n.º 2, pp. 321-329, April 2014.

Correia, J.R.; Lima, J.S.; Brito, J. de (2014): "Post-fire mechanical performance of concrete made with selected plastic waste aggregates", Cement and Concrete Composites, V. 53, pp. 187-199, October 2014.

Costa, A.A.; Tavares, L.V. (2014): "Social e-business as support for construction e-procurement: e-procurement network dynamics", Automation in Construction, V. 43, pp. 180-186, July 2014.

Costa, J.; Paulo, P.V.; Branco, F.; Brito, J. de (2014): "Modeling the evolution of stains in old building facades caused by collection of dirt", Journal of Performance of Constructed Facilities, V. 28, n.º 2, pp. 264-271, April 2014.

Cruz, C.O.; Marques, R.C. (2014): "Theoretical considerations on quantitative PPP viability analysis", Journal of Management in Engineering, V. 30, n.º 1, pp. 122-126, January 2014.

Dias, J.L.; Silva, A.; Chai, C.; Gaspar, P.L.; Brito, J. de (2014): "Neural networks applied to service life prediction of exterior painted surfaces", Building Research & Information, V. 42, n.º 3, pp. 371-380, May 2014.

Dias-da-Costa, D.; Carmo, R.N.F. do; Graça-e-Costa, R.; Valença, J.; Alfaiate, J. (2014): "Longitudinal reinforcement ratio in lightweight aggregate concrete beams", Engineering Structures, V. 81, pp. 219-229, December 2014.

Dias-da-Costa, D.; Valença, J.; Carmo, R.N.F. do (2014): "Curvature assessment of reinforced concrete beams using photogrammetric techniques", Materials and Structures, V. 47, n.º 10, pp. 1745-1760, October 2014.

Dinis, P.B.; Young, B.; Camotim, D. (2014): "Local–distortional interaction in cold-formed steel rack-section columns", Thin-Walled Structures, V. 81, pp. 185-194, August 2014.

Dinis, P.B.; Young, B.; Camotim, D. (2014): "Strength, interactive failure and design of web-stiffened lipped channel columns exhibiting distortional buckling", Thin-Walled Structures, V. 81, pp. 195-209, August 2014.

Duarte, P.; Correia, J.R.; Ferreira, J.; Nunes, F.; Arruda, M. (2014): "Experimental and numerical study on the effect of repairing reinforced concrete cracked beams strengthened with CFRP laminates", Canadian Journal of Civil Engineering, V. 41, n.º 3, pp. 222-231, March 2014.

Duarte, R.G.; Castela, A.S.; Neves, R.; Freire, L.; Montemor, M.F. (2014): "Corrosion behavior of stainless steel rebars embedded in concrete: an electrochemical impedance spectroscopy study", Electrochimica Acta, V. 124, pp. 218-224, April 2014.

Edis, E.; Flores-Colen, I.; Brito, J. de (2014): "Passive thermographic detection of moisture problems in façades with adhered ceramic cladding", Construction and Building Materials, V. 51, pp. 187-197, January 2014.

Emídio, F.; Brito, J. de; Gaspar, P.L.; Silva, A. (2014): "Application of the factor method to the estimation of the service life of natural stone cladding", Construction and Building Materials, V. 66, pp. 484-493, September 2014.

Evangelista, L; Brito, J. de (2014): "Concrete with fine recycled aggregates: a review", European Journal of Environmental and Civil Engineering, V. 18, n.º 2, pp. 129-172, February 2014.

Ferreira, J.; Pinheiro, M.D.; Brito, J. de (2014): "Portuguese sustainable construction assessment tools benchmarked with BREEAM and LEED: An energy analysis", Energy and Buildings, V. 69, pp. 451-463, February 2014.

Ferreira, J.G.; Teixeira, M.J.; Duţu, A.; Branco, F.A.; Gonçalves, A.M. (2014): "Experimental evaluation and numerical modelling of timber-framed walls", Experimental Techniques, V. 38, n.º 4, pp. 45-53, July/August 2014.

Ferreira, L.F.B.; Costa, H.S.S.; Barata, I.I.A.; Júlio, E.N.B.S.; Tiago, P.N.M.; Coelho, J.F.J. (2014): "Precast alkali-activated concrete towards sustainable construction", Magazine of Concrete Research, V. 66, n.º 12, pp. 618-626, July 2014.

Ferreira, M.A.; Mota de Sá, F.; Oliveira, C.S. (2014): "Disruption index, DI: an approach for assessing seismic risk in urban systems (theoretical aspects)", Bulletin of Earthquake Engineering, V. 12, n.º 4, pp. 1431-1458, August 2014.

Ferreira, P.S.; Virtuoso, F.B.E. (2014): "Semi-analytical models for the post-buckling analysis and ultimate strength prediction of isotropic and orthotropic plates under uniaxial compression with the unloaded edges free from stresses", Thin-Walled Structures, V. 82, pp. 82-94, September 2014.

Firmo, J.P.; Arruda, M.R.T.; Correia, J.R. (2014): "Contribution to the understanding of the mechanical behaviour of CFRP-strengthened RC beams subjected to fire: Experimental and numerical assessment", Composites Part B: Engineering, V. 66, pp. 15-24, October 2014.

Fong, F.H.Y.; Standing, J.R.; Bourne-Webb, P.J. (2014): "Building response to adjacent deep basement construction", Proceedings of the Institution of Civil Engineers-Geotechnical Engineering, V. 167, n.º 2, pp. 130-143, April 2014.

Freire, L.M.R.; Brito, J. de; Correia, J.R. (2014): "Management system for road bridge structural bearings", Structure and Infrastructure Engineering, V. 10, n.º 8, pp. 1068-1086, August 2014.

Galbusera, M.M.; Brito, J. de; Silva, A. (2014): "The importance of the quality of sampling in service life prediction", Construction and Building Materials, V. 66, pp. 19-29, September 2014.

Galibert, P.; Valois, R.; Mendes, M.; Guérin, R. (2014): "Seismic study of the low-permeability volume in southern France karst systems", Geophysics, V. 79, n.º 1, pp. EN1-EN13, January 2014.

Gama, D.; Almeida, J.F. (2014): "Concrete integral abutment bridges with reinforced concrete piles", Structural Concrete, V. 15, n.º 3, pp. 292-304, September 2014.

Gameiro, F.; Brito, J. de; Correia da Silva, D. (2014): "Durability performance of structural concrete containing fine aggregates from waste generated by marble quarrying industry", Engineering Structures, V. 59, pp. 654-662, February 2014.

Garrido, M.; Correia, J.R.; Branco, F.A.; Keller, T. (2014): "Creep behaviour of sandwich panels with rigid polyurethane foam core and glass-fibre reinforced polymer faces: Experimental tests and analytical modelling", Journal of Composite Materials, V. 48, n.º 18, pp. 2237-2249, August 2014.

Ghafari, E.; Costa, H.; Júlio, E.N.B.S. (2014): "RSM-based model to predict the performance of self-compacting UHPC reinforced with hybrid steel micro-fibers", Construction and Building Materials, V. 66, pp. 375-383, September 2014.

Ghafari, E.; Costa, H.; Júlio, E.N.B.S.; Portugal, A.; Durães, L. (2014): "The effect of nanosilica addition on flowability, strength and transport properties of ultra high performance concrete", Materials & Design, V. 59, pp. 1-9, July 2014.

Godinho, L.; Dias-da-Costa, D.; Valença, J.; Areias, P. (2014): "An efficient technique for surface strain recovery from photogrammetric data using meshless interpolation", Strain, V. 50, n.º 2, pp. 132-149, April 2014.

Gomes, M.; Brito, J. de; Bravo, M. (2014): "Mechanical performance of structural concrete with incorporation of coarse recycled concrete and ceramic aggregates", Journal of Materials in Civil Engineering, V. 26, n.º 10, pp. 04014076, October 2014.

Gomes, M.G.; Santos, A.J.; Moret Rodrigues, A. (2014): "Solar and visible optical properties of glazing systems with venetian blinds: numerical, experimental and blind control study", Building and Environment, V. 71, pp. 47-59, January 2014.

Gomes, R.C. (2014): "Numerical simulation of the seismic response of tunnels in sand with an elastoplastic model", Acta Geotechnica, V. 9, n.º 4, pp. 613-629, August 2014.

Gomes, R.C.; Lopes, I.F. (2014): "How the response spectrum of non-liquefied loose-to-medium sand deposits is affected by the groundwater level", Computers and Geotechnics, V. 57, pp. 53-64, April 2014.

Gonçalves, A.M.; Gomes-Ferreira, J.; Guerreiro, L.; Branco, F. (2014): "Seismic retrofitting of timber framed walls", Materiales de Construcción, V. 64, n.º 316, pp. e040, October-December 2014.

Gonçalves, R.; Bebiano, R.; Camotim, D. (2014): "On the shear deformation modes in the framework of Generalized Beam Theory", Thin-Walled Structures, V. 84, pp. 325-334, November 2014.

Gonçalves, R.; Camotim, D. (2014): "The vibration behaviour of thin-walled regular polygonal tubes", Thin-Walled Structures, V. 84, pp. 177-188, November 2014.

Gonçalves, R.; Coelho, T.; Camotim, D. (2014): "On the plastic moment of I-sections subjected to moderate shear forces", Thin-Walled Structures, V. 78, pp. 138-147, May 2014.

Gonilha, J.A.; Barros, J.; Correia, J.R.; Sena-Cruz, J.; Branco, F.A.; Ramos, L.F.; Gonçalves, D.; Alvim, M.R.; Santos, T. (2014): "Static, dynamic and creep behaviour of a full-scale GFRP-SFRSCC hybrid footbridge", Composite Structures, V. 118, pp. 496-509, December 2014.

Gonilha, J.A.; Correia, J.R.; Branco, F.A. (2014): "Structural behaviour of a GFRP-concrete hybrid footbridge prototype: Experimental tests and numerical and analytical simulations", Engineering Structures, V. 60, pp. 11-22, February 2014.

Guerra, M.; Ceia, F.; Brito, J. de; Júlio, E. (2014): "Anchorage of steel rebars to recycled aggregates concrete", Construction and Building Materials, V. 72, pp. 113-123, December 2014.

Henriques, D.; Brito, J. de; Duarte, S.; Nunes, L. (2014): "Consolidating preservative-treated wood: Combined mechanical performance of boron and polymeric products in wood degraded by Coniophora puteana", Journal of Cultural Heritage, V. 15, n.º 1, pp. 10-17, January-February 2014.

Ivannikov, G.; Tiago, C.; Pimenta, P.M. (2014): "Meshless implementation of the geometrically exact Kirchhoff–Love shell theory", International Journal for Numerical Methods in Engineering, V. 100, n.º 1, pp. 1-39, October 2014.

Ivannikov, G.; Tiago, C.; Pimenta, P.M. (2014): "On the boundary conditions of the geometrically nonlinear Kirchhoff–Love shell theory", International Journal of Solids and Structures, V. 51, n.º 18, pp. 3101-3112, September 2014.

Jorge, J.P.; Simões, F.M.F.; Pires, E.B.; Rego, P.A.; Tavares, D.G.; Lopes, D.S.; Gaspar, A. (2014): "Finite element simulations of a hip joint with femoroacetabular impingement", Computer Methods in Biomechanics and Biomedical Engineering, V. 17, n.º 11, pp. 1275-1284, August 2014.

Kouris, L.A.S.; Meireles, H.; Bento, R.; Kappos, A.J. (2014): "Simple and complex modelling of timber-framed masonry walls in Pombalino buildings", Bulletin of Earthquake Engineering, V. 12, n.º 4,, pp. 1777-1803, August 2014.

Kuipers, M.; Tomé, A.; Pinheiro, T.; Nunes, M.; Heitor, T. (2014): "Building space–use analysis system — A multi location/multi sensor platform", Automation in Construction, V. 47, pp. 10-23, November 2014.

Lentas, K.; Ferreira, A.M.G.; Clévédé, E.; Roch, J. (2014): "Source models of great earthquakes from ultra low-frequency normal mode data", Physics of the Earth and Planetary Interiors, V. 233, pp. 41-67, August 2014.

Lopes, A.V.; Lopes, S.M.R.; Carmo, R.N.F. (2014): "Stiffness of reinforced concrete slabs subjected to torsion", Materials and Structures, V. 47, n.º 1-2, pp. 227-238, January 2014.

Lopes, I.; Santos, J.A.; Gomes, R.C. (2014): "V_S profile: measured versus empirical correlations—a Lower Tagus river valley example", Bulletin of Engineering Geology and the Environment, V. 73, n.º 4, pp. 1127-1139, November 2014.

Loret, B.; Simões, F.M.F. (2014): "A thermodynamically consistent growth law for collagen fiber reinforced tissues in a mixture context", Mechanics of Materials, V. 76, pp. 45-63, September 2014.

Lourenço, P.; Pinheiro, M.D.; Heitor, T. (2014): "From indicators to strategies: Key Performance Strategies for sustainable energy use in Portuguese school buildings", Energy and Buildings, V. 85, pp. 212-224, December 2014.

Martinho, E.; Dionísio, A.; Almeida, F.; Mendes, M.; Grangeia, C. (2014): "Integrated geophysical approach for stone decay diagnosis in cultural heritage", Construction and Building Materials, V. 52, pp. 345-352, February 2014.

Martins, J.; Marques, R.C.; Cruz, C.O. (2014): "Maximizing the value for money of PPP arrangements through flexibility: An application to airports", Journal of Air Transport Management, V. 39, pp. 72-80, July 2014.

Martins, J.P.; Simões da Silva, L.; Reis, A. (2014): "Ultimate load of cylindrically curved panels under in-plane compression and bending—Extension of rules from EN 1993-1-5", Thin-Walled Structures, V. 77, pp. 36-47, April 2014.

Martins, P.; Brito, J. de; Rosa, A.; Pedro, D. (2014): "Mechanical performance of concrete with incorporation of coarse waste from the marble industry", Materials Research - Ibero-american Journal of Materials, V. 17, n.º 5, pp. 1093-1101, September-October 2014.

Marujo, N.; Araújo, M.A.V.C.; Trigo-Teixeira, A.; Falcão, A.P.; Mazzolari, A. (2014): "Storm-surge hindcast at Viana do Castelo: an oceanic and estuarine domain approach", Journal of Coastal Research, V. 30, n.º 6, pp. 1268-1277, November 2014.

Matias, D.; Brito, J. de; Rosa, A.; Pedro, D. (2014): "Durability of concrete with recycled coarse aggregates: influence of superplasticizers", Journal of Materials in Civil Engineering, V. 26, n.º 7, pp. 06014011, July 2014.

Meireles, H.; Bento, R.; Cattari, S.; Lagomarsino, S. (2014): "Seismic assessment and retrofitting of Pombalino buildings by pushover analyses ", Earthquakes and Structures, V. 7, n.º 1, pp. 57-82, July 2014.

Mendes, L.A.M.; Castro, L.M.S.S. (2014): "A simplified reinforcing steel model suitable for cyclic loading including ultra-low-cycle fatigue effects", Engineering Structures, V. 68, pp. 155-164, June 2014.

Mendes, P.; Grandão Lopes, J.; Brito, J. de.; Feiteira, J. (2014): "Waterproofing of concrete foundations", Journal of Performance of Constructed Facilities, V. 28, n.º 2, pp. 242-249, April 2014.

Mesacasa Jr., E.; Dinis, P.B.; Camotim, D.; Malite, M. (2014): "Mode interaction in thin-walled equal-leg angle columns", Thin-Walled Structures, V. 81, pp. 138-149, August 2014.

Moldovan, I.D.; Cao, T.D.; Teixeira de Freitas, J. (2014): "Elastic wave propagation in unsaturated porous media using hybrid-Trefftz stress elements", International Journal for Numerical Methods in Engineering, V. 97, n.º 1, pp. 32-67, January 2014.

Moldovan, I.D.; Cao, T.D.; Teixeira de Freitas, J. (2014): "Hybrid-Trefftz displacement finite elements for elastic unsaturated soils", International Journal of Computational Methods, V. 11, n.º 2, pp. 1342005, March 2014.

Moret Rodrigues, A.; Gomes, M.G. (2014): "Natural ventilation of a room with an atmospheric-vent water heater in both on- and off-states", Energy and Buildings, V. 74, pp. 53-60, May 2014.

Natário, P.; Silvestre, N.; Camotim, D. (2014): "Computational modelling of flange crushing in cold-formed steel sections", Thin-Walled Structures, V. 84, pp. 393-405, November 2014.

Natário, P.; Silvestre, N.; Camotim, D. (2014): "Web crippling failure using quasi-static FE models", Thin-Walled Structures, V. 84, pp. 34-49, November 2014.

Neno, C.; Brito, J. de; Veiga, R. (2014): "Using fine recycled concrete aggregate for mortar production", Materials Research - Ibero-american Journal of Materials, V. 17, n.º 1, pp. 168-177, January-February 2014.

Neto, P.; Alfaiate, J.; Vinagre, J. (2014): "A three-dimensional analysis of CFRP-concrete bond behaviour", Composites Part B: Engineering, V. 59, pp. 153-165, March 2014.

Neves e Sousa, A.; Gibbs, B.M. (2014): "Parameters influencing low frequency impact sound transmission in dwellings", Applied Acoustics, V. 78, pp. 77-88, April 2014.

Nogueira, R.; Ferreira Pinto, A.P.; Gomes, A. (2014): "Assessing mechanical behavior and heterogeneity of low-strength mortars by the drilling resistance method", Construction and Building Materials, V. 68, pp. 757-768, October 2014.

Oliveira, C.S. (2014): "Fundamental frequencies of vibration of footbridges in Portugal: From in situ measurements to numerical modelling", Shock and Vibration, V. 2014, pp. 925437, June 2014.

Oliveira, C.S.; Gassol, G.; Goula, X.; Susagna, T. (2014): "A European digital accelerometric database: statistical analysis of engineering parameters of small to moderate magnitude events", Earthquake Engineering and Engineering Vibration, V. 13, n.º 4, pp. 583-597, December 2014.

Pargana, N.; Pinheiro, M.D.; Silvestre, J.D.; Brito, J. de (2014): "Comparative environmental life cycle assessment of thermal insulation materials of buildings", Energy and Buildings, V. 82, pp. 466-481, October 2014.

Paulo, P.V.; Branco, F.; Brito, J. de (2014): "BuildingsLife: a building management system", Structure and Infrastructure Engineering, V. 10, n.º 3, pp. 388-397, March 2014.

Paulo, P.V.; Branco, F.; Brito, J. de (2014): "Using orthorphotography based on BuildingsLife software to inspect building façades", Journal of Performance of Constructed Facilities, V. 28, n.º 5, pp. 04014019, October 2014.

Pedro, D.; Brito, J. de; Evangelista, L. (2014): "Influence of the use of recycled concrete aggregates from different sources on structural concrete", Construction and Building Materials, V. 71, pp. 141-151, November 2014.

Penacho, P.; Brito, J. de; Veiga, M.R. (2014): "Physico-mechanical and performance characterization of mortars incorporating fine glass waste aggregate", Cement and Concrete Composites, V. 50, pp. 47-59, July 2014.

Pereira, A.; Palha, F.; Brito, J. de; Silvestre, J.D. (2014): "Diagnosis and repair of gypsum plaster coatings: statistical characterization and lessons learned from a field survey", Journal of Civil Engineering and Management, V. 20, n.º 4, pp. 485-496, August 2014.

Pinto, A.P.F.; Rodrigues, J.D. (2014): "Impacts of consolidation procedures on colour and absorption kinetics of carbonate stones", Studies in Conservation, V. 59, n.º 2, pp. 79-90, March 2014.

Sá, G.; Sá, J.; Brito, J. de (2014): "Inspection and diagnosis system for rendered walls", International Journal of Civil Engineering (Transaction A: Civil Engineering), V. 12, n.º 2, pp. 280-291, June 2014.

Saikia, N.; Brito, J. de (2014): "Mechanical properties and abrasion behaviour of concrete containing shredded PET bottle waste as a partial substitution of natural aggregate", Construction and Building Materials, V. 52, pp. 236-244, February 2014.

Sampaio, A.Z.; Martins, O.P. (2014): "The application of virtual reality technology in the construction of bridge: The cantilever and incremental launching methods", Automation in Construction, V. 37, pp. 58-67, January 2014.

Santos, P.M.D.; Júlio, E.N.B.S. (2014): "Interface shear transfer on composite concrete members", ACI Structural Journal, V. 111, n.º 1, pp. 113-121, January-February 2014.

Silva, A.; Gaspar, P.L.; Brito, J. de (2014): "Durability of current renderings: A probabilistic analysis", Automation in Construction, V. 44, pp. 92-102, August 2014.

Silva, A.; Neves, R.; Brito, J. de (2014): "Statistical modelling of carbonation in reinforced concrete", Cement and Concrete Composites, V. 50, pp. 73-81, July 2014.

Silva, A.M.; Brito, J. de; Veiga, R. (2014): "Incorporation of fine plastic aggregates in rendering mortars", Construction and Building Materials, V. 71, pp. 226-236, November 2014.

Silva, B.A.; Ferreira Pinto, A.P.; Gomes, A. (2014): "Influence of natural hydraulic lime content on the properties of aerial lime-based mortars", Construction and Building Materials, V. 72, pp. 208-218, December 2014.

Silva, C.M.; Flores-Colen, I.; Esteves, T.; Gaspar, S. (2014): "In-service performance of renders using a cohesive zone model", International Journal of Adhesion and Adhesives, V. 55, pp. 145-154, December 2014.

Silva, D.; Gameiro, F.; Brito, J. de (2014): "Mechanical properties of structural concrete containing fine aggregates from waste generated by the marble quarrying industry", Journal of Materials in Civil Engineering, V. 26, n.º 6, pp. 04014008, June 2014.

Silva, R.V.; Brito, J. de; Dhir, R.K. (2014): "Properties and composition of recycled aggregates from construction and demolition waste suitable for concrete production", Construction and Building Materials, V. 65, pp. 201-217, August 2014.

Silvestre, J.D.; Brito, J. de; Pinheiro, M.D. (2014): "Environmental impacts and benefits of the end-of-life of building materials - Calculation rules, results and contribution to a "cradle to cradle" life cycle", Journal of Cleaner Production, V. 66, pp. 37-45, March 2014.

Simões, A.; Bento, R.; Cattari, S.; Lagomarsino, S. (2014): "Seismic performance-based assessment of “Gaioleiro” buildings", Engineering Structures, V. 80, pp. 486-500, December 2014.

Soares, D.; Brito, J. de; Ferreira, J.; Pacheco, J. (2014): "In situ materials characterization of full-scale recycled aggregates concrete structures", Construction and Building Materials, V. 71, pp. 237-245, November 2014.

Soares, D.; Brito, J. de; Ferreira, J.; Pacheco, J. (2014): "Use of coarse recycled aggregates from precast concrete rejects: Mechanical and durability performance", Construction and Building Materials, V. 71, pp. 263-272, November 2014.

Sousa, J.M.; Correia, J.R.; Cabral-Fonseca, S.; Diogo, A.C. (2014): "Effects of thermal cycles on the mechanical response of pultruded GFRP profiles used in Civil Engineering applications", Composite Structures, V. 116, pp. 720-731, September-October 2014.

Sousa, V.; Almeida, N.M.; Dias, L.A. (2014): "Risk-based management of occupational safety and health in the construction industry – Part 1: Background knowledge", Safety Science, V. 66, pp. 75-86, July 2014.

Sousa, V.; Almeida, N.M.; Dias, L.A. (2014): "Role of statistics and engineering judgment in developing optimized time-cost relationship models", Journal of Construction Engineering and Management, V. 140, n.º 8, pp. , August 2014.

Sousa, V.; Almeida, N.M.; Dias, L.A.; Branco, F.A. (2014): "Risk-informed time-cost relationship models for sanitation projects", Journal of Construction Engineering and Management, V. 140, n.º 5, pp. , May 2014.

Sousa, V.; Ferreira, F.M.; Meireles, I.; Almeida, N.; Saldanha Matos, J. (2014): "Comparison of the inspector and rating protocol uncertainty influence in the condition rating of sewers", Water Science and Technology, V. 69, n.º 4, pp. 862-867, April 2014.

Sousa, V.; Matos, J.P.; Almeida, N.; Saldanha Matos, J. (2014): "Risk assessment of sewer condition using artificial intelligence tools: Application to the SANEST sewer system", Water Science and Technology, V. 69, n.º 3, pp. 622-627, March 2014.

Sousa, V.; Matos, J.P.; Matias, N. (2014): "Evaluation of artificial intelligence tool performance and uncertainty for predicting sewer structural condition", Automation in Construction, V. 44, pp. 84-91, August 2014.

Teixeira de Freitas, J.A.; López, C.; Cuong, P.T.; Faria, R. (2014): "Hybrid finite element thermal modelling of fire protected structural elements strengthened with CFRP laminates", Composite Structures, V. 113, pp. 396-402, July 2014.

Tostões, A. (2014): "The diaspora of modern architecture. Between Africa and Brazil, Le Corbusier as signpost", Revue de l’Art, V. 186, pp. 57-63, December 2014.

Valença, J.; Dias-da-Costa, D.; Gonçalves, L.; Júlio, E.N.B.S.; Araújo, H. (2014): "Automatic concrete health monitoring: assessment and monitoring of concrete surfaces", Structure and Infrastructure Engineering, V. 10, n.º 12, pp. 1547-1554, December 2014.

Vieira, R.F.; Lisi, D.; Virtuoso, F.B.E. (2014): "Dynamic analysis of bridge girders submitted to an eccentric moving load", Structural Engineering and Mechanics, V. 52, n.º 1, pp. 173-203, October 2014.

Vieira, R.F.; Virtuoso, F.B.E.; Pereira, E.B.R. (2014): "A higher order model for thin-walled structures with deformable cross-sections", International Journal of Solids and Structures, V. 51, n.º 3-4, pp. 575-598, February 2014.

Vilanova, S.; Nemser, E.S.; Besana-Ostman, G.M.; Bezzeghoud, M.; Borges, J.F.; Silveira, A.B.; Cabral, J.; Carvalho, J.; Cunha, P.P.; Dias, R.P.; Madeira, J.; Lopes, F.C.; Oliveira, C.S.; Perea, H.; García‐Mayordomo, J.; Wong, I.; Arvidsson, R.; Fonseca, J.F.B.D. (2014): "Incorporating descriptive metadata into seismic source zone models for seismic‐hazard assessment: A case study of the Azores–West Iberian Region", Bulletin of the Seismological Society of America, V. 104, n.º 3, pp. 1212-1229, June 2014.

Weston, J.; Ferreira, A.M.G.; Funning, G.J. (2014): "Joint earthquake source inversions using seismo-geodesy and 3-D earth models", Geophysical Journal International, V. 198, n.º 2, pp. 671-696, August 2014.

Zuniga, D.; Brito, J.; Rua, H. (2014): "Designing a roman fort for historical recreation and reenactment purposes", Journal of Professional Issues in Engineering Education and Practice, V. 140, n.º 4, pp. 04014003, October 2014.

2013

Abambres, M.; Camotim, D.; Silvestre, N. (2013): "Physically non-linear GBT analysis of thin-walled members", Computers & Structures, V. 129, pp. 148-165, December 2013.

Amaro, B.; Saraiva, D.; Brito, J. de; Flores-Colen, I. (2013): "Inspection and diagnosis system of ETICS on walls", Construction and Building Materials, V. 47, pp. 1257-1267, October 2013.

Areias, P.; Dias-da-Costa, D.; Pires, E.B.; Van Goethem, N. (2013): "Asymmetric quadrilateral shell elements for finite strains", Computational Mechanics, V. 52, n.º 1, pp. 81-97, July 2013.

Areias, P.; Dias-da-Costa, D.; Sargado, J.M.; Rabczuk, T. (2013): "Element-wise algorithm for modeling ductile fracture with the Rousselier yield function", Computational Mechanics, V. 52, n.º 6, pp. 1429-1443, December 2013.

Areias, P.; Rabczuk, T. (2013): "Finite strain fracture of plates and shells with configurational forces and edge rotations", International Journal for Numerical Methods in Engineering, V. 94, n.º 12, pp. 1099-1122, June 2013.

Areias, P.; Rabczuk, T.; Dias-da-Costa, D. (2013): "Assumed-metric spherically interpolated quadrilateral shell element", Finite Elements in Analysis and Design, V. 66, pp. 53-67, April 2013.

Areias, P.; Rabczuk, T.; Dias-da-Costa, D. (2013): "Element-wise fracture algorithm based on rotation of edges", Engineering Fracture Mechanics, V. 110, pp. 113-137, September 2013.

Areias, P.; Silva, H.G.; Van Goethem, N.; Bezzeghoud, M. (2013): "Damage-based fracture with electro-magnetic coupling", Computational Mechanics, V. 51, n.º 5, pp. 629-640, May 2013.

Arruda, M.R.T.; Castro, L.M.S. (2013): "A new hybrid-mixed stress model for the analysis of concrete structures using damage mechanics", Computers & Structures, V. 125, pp. 23-44, September 2013.

Arruda, M.R.T.; Castro, L.M.S. (2013): "Static and dynamic physically non-linear analysis of concrete structures using a hybrid mixed finite element model", Advances in Engineering Software, V. 65, pp. 112-131, November 2013.

Baker, N.; Guedes, M.C.; Shaikh, N.; Calixto, L.; Aguiar, R. (2013): "The LT-Portugal software: A design tool for architects", Renewable Energy, V. 49, pp. 156-160, January 2013.

Barbudo, A.; Brito, J. de; Evangelista, L.; Bravo, M.; Agrela, F. (2013): "Influence of water-reducing admixtures on the mechanical performance of recycled concrete", Journal of Cleaner Production, V. 59, pp. 93-98, November 2013.

Basaglia, C.; Camotim, D. (2013): "Buckling, post‐buckling, strength and DSM design of cold‐formed steel continuous lipped channel beams", Journal of Structural Engineering-ASCE, V. 139, pp. 657-668, - 2013.

Basaglia, C.; Camotim, D. (2013): "Enhanced generalised beam theory buckling formulation to handle transverse load application effects", International Journal of Solids and Structures, V. 50, n.º 3-4, pp. 531-547, February 2013.

Basaglia, C.; Camotim, D.; Gonçalves, R.; Graça, A. (2013): "GBT-based assessment of the buckling behaviour of cold-formed steel purlins restrained by sheeting", Thin-Walled Structures, V. 72, pp. 217-229, November 2013.

Basaglia, C.; Camotim, D.; Silvestre, N. (2013): "Post-buckling analysis of thin-walled steel frames using generalised beam theory (GBT)", Thin-Walled Structures, V. 62, pp. 229-242, January 2013.

Bebiano, R.; Camotim, D.; Silvestre, N. (2013): "Dynamic analysis of thin-walled members using Generalised Beam Theory (GBT)", Thin-Walled Structures, V. 72, pp. 188-205, November 2013.

Bogas, J.A.; Gomes, A. (2013): "A simple mix design method for structural lightweight aggregate concrete", Materials and Structures, V. 46, n.º 11, pp. 1919-1932, November 2013.

Bogas, J.A.; Gomes, A. (2013): "Compressive behavior and failure modes of structural lightweight aggregate concrete – characterization and strength prediction", Materials and Design, V. 46, pp. 832-841, April 2013.

Bogas, J.A.; Gomes, M.G.; Gomes, A. (2013): "Compressive strength evaluation of structural lightweight concrete by non-destructive ultrasonic pulse velocity method", Ultrasonics, V. 53, n.º 5, pp. 962-972, July 2013.

Bourne-Webb, P.J.; Amatya, B.L.; Soga, K. (2013): "A framework for understanding energy pile behaviour", Proceedings of the Institution of Civil Engineers-Geotechnical Engineering, V. 166, n.º 2, pp. 170-177, April 2013.

Branco, F.A.; Arruda, M.; Correia, J.R. (2013): "Experimental and numerical investigations on the structural response of precast concrete underpasses subjected to live loads", Baltic Journal of Road and Bridge Engineering, V. 8, n.º 1, pp. 48-57, January 2013.

Calado, L.; Proença, J.M.; Espinha, M.; Castiglioni, C.A. (2013): "Hysteretic behaviour of dissipative bolted fuses for earthquake resistant steel frames", Journal of Constructional Steel Research, V. 85, pp. 151-162, June 2013.

Calado, L.; Proença, J.M.; Espinha, M.; Castiglioni, C.A. (2013): "Hysteretic behavior of dissipative welded fuses for earthquake resistant composite steel and concrete frames", Steel and Composite Structures, V. 14, n.º 6, pp. 547-569, June 2013.

Camotim, D.; Dinis, P.B. (2013): "Distortional-global interaction in lipped channel columns", Proceedings of the ICE - Structures and Buildings, V. 166, n.º 8, pp. 381-391, September 2013.

Cardoso, R.; Alonso, E.E.; Maranha das Neves; E. (2013): "A constitutive model for compacted expansive and bonded marls", Geotechnique, V. 63, n.º 13, pp. 1116-1130, May 2013.

Carmo, R.N.F.; Costa, H.; Lourenço C.; Andrade, D.; Simões, T. (2013): "Influence of both concrete strength and transverse confinement on bending behavior of reinforced LWAC beams", Engineering Structures, V. 48, pp. 329-341, March 2013.

Carvalho, G.; Bento, R.; Bhatt, C. (2013): "Nonlinear static and dynamic analyses of reinforced concrete buildings - comparison of different modelling approaches", Earthquakes and Structures, V. 4, n.º 5, pp. 451-470, May 2013.

Castro, S. de; Brito, J. de (2013): "Evaluation of the durability of concrete made with crushed glass aggregates", Journal of Cleaner Production, V.41, pp. 7-14, February 2013.

Challamel, N.; Andrade, A.; Camotim, D. (2013): "On the use of spring models to analyse the lateral-torsional buckling behaviour of cracked beams", Thin-Walled Structures, V. 73, pp. 121-130, December 2013.

Coelho, A.; Brito, J. de (2013): "Economic viability analysis of a construction and demolition waste recycling plant in Portugal – part I: location, materials, technology and economic analysis", Journal of Cleaner Production, V. 39, pp. 338-352, January 2013.

Coelho, A.; Brito, J. de (2013): "Economic viability analysis of a construction and demolition waste recycling plant in Portugal – part II: economic sensitivity analysis", Journal of Cleaner Production, V. 39, pp. 329-337, January 2013.

Coelho, A.; Brito, J. de (2013): "Environmental analysis of a construction and demolition waste recycling plant in Portugal – Part I: Energy consumption and CO2 emissions", Waste Management, V. 33, n.º 5, pp. 1258-1267, May 2013.

Coelho, A.; Brito, J. de (2013): "Environmental analysis of a construction and demolition waste recycling plant in Portugal – Part II: Environmental sensitivity analysis", Waste Management, V. 33, n.º 1, pp. 147-161, January 2013.

Conde, D.A.S.; Baptista, M.A.V.; Sousa Oliveira, C.; Ferreira, R.M.L. (2013): "A shallow-flow model for the propagation of tsunamis over complex geometries and mobile beds", Natural Hazards and Earth System Sciences, V. 13, n.º 10, pp. 2533-2542, October 2013.

Correia, J.R.; Gomes, M.; Pires, J.M.; Branco, F. (2013): "Mechanical behaviour of pultruded glass fibre reinforced polymer composites at elevated temperature: Experiments and model assessment", Composite Structures, V. 98, pp. 303-313, April 2013.

Correia, M.M.; Nunes, F.; Correia, J.R.; Silvestre, N. (2013): "Buckling behavior and failure of hybrid fiber-reinforced polymer pultruded short columns", Journal of Composites for Construction, V. 17, n.º 4, pp. 463-475, August 2013.

Costa, A.A.; Arantes, A.; Tavares, L.V. (2013): "Evidence of the impacts of public e-procurement: The Portuguese experience", Journal of Purchasing and Supply Management, V. 19, n.º 4, pp. 238-246, December 2013.

Costa, A.A.; Tavares, L.V. (2013): "Advanced multicriteria models to promote quality and reputation in public construction e-marketplaces", Automation in Construction, V.30, pp. 205-215, March 2013.

Costa, J.C.; Tiago, C.M.; Pimenta, P.M. (2013): "Meshless analysis of shear deformable shells: the linear model", Computational Mechanics, V. 52, n.º 4, pp. 763-778, October 2013.

Cruz, C.O.; Marques, R.C. (2013): "Endogenous determinants for renegotiating concessions: evidence from local infrastructure", Local Government Studies, V. 39, n.º 3, pp. 352-374, June 2013.

Cruz, C.O.; Marques, R.C. (2013): "Exogenous determinants for renegotiating public infrastructure concessions: evidence from Portugal", Journal of Construction Engineering and Management, V. 139, n.º 9, pp. 1082-1090, September 2013.

Cruz, C.O.; Marques, R.C. (2013): "Flexible contracts to cope with uncertainty in public–private partnerships", International Journal of Project Management, V. 31, n.º 3, pp. 473-483, April 2013.

Cruz, C.O.; Marques, R.C. (2013): "Integrating infrastructure and clinical management in PPPs for health care", Journal of Management in Engineering, V. 29, n.º 4, pp. 471-481, October 2013.

Cruz, C.O.; Marques, R.C. (2013): "Risk-sharing in highway concessions: contractual diversity in Portugal", Journal of Professional Issues in Engineering Education and Practice, V. 139, n.º 2, pp. 99-108, April 2013.

Cruz, C.O.; Marques, R.C. (2013): "Using the economic and financial reequilibrium model to decrease infrastructure contract incompleteness", Journal of Infrastructure Systems, V. 19, n.º 1, pp. 58-66, March 2013.

Delgado, A.; Brito, J. de; Silvestre, J.D. (2013): "Inspection and diagnosis system for wood flooring", Journal of Performance of Constructed Facilities, V. 27, n.º 5, pp. 564-574, October 2013.

Dias-da-Costa, D.; Alfaiate, J.; Sluys, L.; Areias, P.; Júlio, E. (2013): "An embedded formulation with conforming finite elements to capture strong discontinuities", International Journal for Numerical Methods in Engineering, V. 93, n.º 2, pp. 224-244, July 2013.

Domingues, A.; Custódio, S.; Cesca, S. (2013): "Waveform inversion of small-to-moderate earthquakes located offshore southwest Iberia", Geophysical Journal International, V. 192, n.º 1, pp. 248-259, January 2013.

Duarte, A.P.C.; Silvestre, N. (2013): "A new slenderness-based approach for the web crippling design of plain channel steel beams", International Journal of Steel Structures, V. 13, n.º 3, pp. 421-434, September 2013.

Edis, E.; Flores-Colen, I.; Brito, J. de (2013): "Passive thermographic inspection of adhered ceramic claddings: limitation and conditioning factors", Journal of Performance of Constructed Facilities, V. 27, n.º 6, pp. 737-747, December 2013.

Evangelista, L.; Guedes, M.; Ferro, A.C.; Brito, J. de (2013): "Microstructure of concrete prepared with construction recycled aggregates", Microscopy and Microanalysis, V. 19, Suppl. S4, pp. 147-148, August 2013.

Falcão, A.P.; Mazzolari, A.; Gonçalves, A.B.; Araújo, M.A.V.C.; Trigo-Teixeira, A. (2013): "Influence of elevation modelling on hydrodynamic simulations of a tidally-dominated estuary", Journal of Hydrology, V. 497, pp. 152-164, August 2013.

Faria, B.; Silvestre, N.; Canongia Lopes, J.N. (2013): "Induced anisotropy of chiral carbon nanotubes under combined tension-twisting", Mechanics of Materials, V. 58, pp. 97-109, March 2013.

Faria, B.; Silvestre, N.; Canongia Lopes, J.N. (2013): "Tension-twisting dependent kinematics of chiral CNTs", Composites Science and Technology, V. 74, pp. 211-220, January 2013.

Feio, A.; Guedes, M.C. (2013): "Architecture, tourism and sustainable development for the Douro region", Renewable Energy, V. 49, pp. 72-76, January 2013.

Feiteira, J.; Grandão Lopes, J.; Brito, J. de (2013): "Mechanical performance of liquid-applied roof waterproofing systems", Journal of Performance of Constructed Facilities, V. 27, n.º 3, pp. 244-251, June 2013.

Ferreira, J.; Pinheiro, M.D.; Brito, J. de (2013): "Refurbishment decision support tools: A review from a Portuguese user’s perspective", Construction and Building Materials, V. 49, pp. 425-447, December 2013.

Ferreira, J.; Pinheiro, M.D.; Brito, J. de (2013): "Refurbishment decision support tools review—Energy and life cycle as key aspects to sustainable refurbishment projects", Energy Policy, V. 62, pp. 1453-1460, November 2013.

Godinho, L.; Dias-da-Costa, D.; Areias, P.; Júlio, E.N.B.S.; Soares Jr., D. (2013): "Numerical study towards the use of a SH wave ultrasonic-based strategy for crack detection in concrete structures", Engineering Structures, V. 49, pp. 782-791, April 2013.

Gomes, R.C. (2013): "Effect of stress disturbance induced by construction on the seismic response of shallow bored tunnels", Computers and Geotechnics, V. 49, pp. 338-351, April 2013.

Gonçalves, R.; Camotim, D. (2013): "Buckling behaviour of thin-walled regular polygonal tubes subjected to bending or torsion", Thin-Walled Structures, V. 73, pp. 185-197, December 2013.

Gonçalves, R.; Camotim, D. (2013): "Elastic buckling of uniformly compressed thin-walled regular polygonal tubes", Thin-Walled Structures, V. 71, pp. 35-45, October 2013.

Gonçalves, R.; Camotim, D. (2013): "On the behaviour of thin-walled steel regular polygonal tubular members", Thin-Walled Structures, V. 62, pp. 191-205, January 2013.

Gonilha, J.A.; Correia, J.R.; Branco, F.A. (2013): "Creep response of GFRP-concrete hybrid structures: Application to a footbridge prototype", Composites Part B: Engineering, V. 53, pp. 193-206, October 2013.

Gonilha, J.A.; Correia, J.R.; Branco, F.A. (2013): "Dynamic response under pedestrian load of a GFRP–SFRSCC hybrid footbridge prototype: Experimental tests and numerical simulation", Composite Structures, V. 95, pp. 453-463, January 2013.

Gonilha, J.A.; Correia, J.R.; Branco, F.A.; Caetano, E.; Cunha, Á. (2013): "Modal identification of a GFRP-concrete hybrid footbridge prototype: experimental tests and analytical and numerical simulations", Composite Structures, V. 106, pp. 724-733, December 2013.

Graça-e-Costa. R.; Alfaiate, J.; Dias-da-Costa, D.; Neto, P.; Sluys, L.J. (2013): "Generalisation of non-iterative methods for the modelling of structures under non-proportional loading", International Journal of Fracture, V. 182, n.º 1, pp. 21-38, July 2013.

Granadeiro, V.; Correia, J.R.; Leal, V.M.S.; Duarte, J.P. (2013): "Envelope-related energy demand: A design indicator of energy performance for residential buildings in early design stages", Energy and Buildings, V. 61, pp. 215-223, June 2013.

Granadeiro, V.; Duarte, J.P.; Correia, J.R.; Leal, V.M.S. (2013): "Building envelope shape design in early stages of the design process: integrating architectural design systems and energy simulation", Automation in Construction, V. 32, pp. 196-209, July 2013.

Granadeiro, V.; Pina, L.; Duarte, J.P.; Correia, J.R.; Leal, V.M.S. (2013): "A general indirect representation for optimization of generative design systems by genetic algorithms: Application to a shape grammar-based design system", Automation in Construction, V. 35, pp. 374-382, November 2013.

Guedes, M.; Evangelista, L.; Brito, J. de; Ferro, A.C. (2013): "Microstructural characterization of concrete prepared with recycled aggregates", Microscopy and Microanalysis, V. 19, n.º 5, pp. 1222-1230, October 2013.

Hassanein, M.F.; Silvestre, N. (2013): "Flexural behavior of lean duplex stainless steel girders with slender unstiffened webs", Journal of Constructional Steel Research, V. 85, pp. 12-23, June 2013.

Hassanein, M.F.; Silvestre, N. (2013): "Lateral–distortional buckling of hollow tubular flange plate girders with slender unstiffened webs", Engineering Structures, V. 56, pp. 572-584, November 2013.

Henriques, D.F.; Nunes, L.; Brito, J. de (2013): "Mechanical evaluation of timber conservation processes by bending tests", Advanced Materials Research, V. 778, pp. 612-619, - 2013.

Ivannikov, V.; Tiago, C.; Moitinho de Almeida, J.P.; Díez, P. (2013): "Meshless methods in dual analysis: Theoretical and implementation issues", Engineering Analysis with Boundary Elements, V. 37, n.º 12, pp. 1728-1744, December 2013.

Jiménez, J.R.; Ayuso, J.; López, M.; Fernández, J.M.; Brito, J. de (2013): "Use of fine recycled aggregates from ceramic waste in masonry mortar manufacturing", Construction and Building Materials, V. 40, pp. 679-690, March 2013.

Landesmann, A.; Camotim, D. (2013): "On the Direct Strength Method (DSM) design of cold-formed steel columns against distortional failure", Thin-Walled Structures, V. 67, pp. 168-187, June 2013.

Lentas, K.; Ferreira, A.M.G.; Vallée, M. (2013): "Assessment of SCARDEC source parameters of global large (M_w ≥ 7.5) subduction earthquakes", Geophysical Journal International, V. 195, n.º 3, pp. 1989-2004, December 2013.

Lira, C.; Lousada, M.; Falcão, A.P.; Gonçalves, A.B.; Heleno, S.; Matias, M.; Pereira, M.J.; Pina, P.; Sousa, A.J.; Oliveira, R.; Almeida. A.B. (2013): "The 20 February 2010 Madeira Island flash-floods: VHR satellite imagery processing in support of landslide inventory and sediment budget assessment", Natural Hazards and Earth System Sciences, V. 13, n.º 3, pp. 709-719, March 2013.

Lopes, I.; Deidda, G.P.; Mendes, M.; Strobbia, C.; Santos, J. (2013): "Contribution of in situ geophysical methods for the definition of the São Sebastião crater model (Azores)", Journal of Applied Geophysics, V. 98, pp. 265-279, November 2013.

López, C.; Firmo, J.P.; Correia, J.R.; Tiago, C. (2013): "Fire protection systems for reinforced concrete slabs strengthened with CFRP laminates", Construction and Building Materials, V. 47, pp. 324-333, October 2013.

Lourenço, M.S.; Almeida, J.F. (2013): "Adaptive stress field models: Assessment of design models", ACI Structural Journal, V. 110, n.º 1, pp. 83-93, January-February 2013.

Lourenço, M.S.; Almeida, J.F. (2013): "Adaptive stress field models: Formulation and validation", ACI Structural Journal, V. 110, n.º 1, pp. 71-81, January-February 2013.

Mália, M.; Brito, J. de; Pinheiro, M.D.; Bravo, M. (2013): "Construction and demolition waste indicators", Waste Management & Research, V. 31, n.º 3, pp. 241-255, March 2013.

Margalha, M.; Silva, A.; Veiga, M.; de Brito, J.; Ball, R.; Allen, G. (2013): "Microstructural changes of lime putty during ageing", Journal of Materials in Civil Engineering, V. 25, n.º 10, pp. 1524-1532, October 2013.

Marques, A.M.; Correia, J.R.; de Brito, J. (2013): "Post-fire residual mechanical properties of concrete made with recycled rubber aggregate", Fire Safety Journal, V. 58, pp. 49-57, May 2013.

Marques, A.M.; Krejci, R.; Siqueira, S.W.M.; Pimentel, M.; Braz, M.H.L.B. (2013): "Structuring the discourse on social networks for learning: case studies on blogs and microblogs", Computers in Human Behavior, V. 29, n.º 2, pp. 395-400, March 2013.

Matias, D.; Brito, J. de; Rosa, A.; Pedro, D. (2013): "Mechanical properties of concrete produced with recycled coarse aggregates – Influence of the use of superplasticizers", Construction and Building Materials, V. 44, pp. 101-109, July 2013.

Mendes, L.A.M.; Castro, L.M.S.S. (2013): "A new RC bond model suitable for three-dimensional cyclic analyses", Computers & Structures, V. 120, pp. 47-64, April 2013.

Mendes, L.A.M.; Castro, L.M.S.S. (2013): "Using hybrid discretizations in parallelized structural dynamic analyses", Advances in Engineering Software, V. 56, pp. 72-83, February 2013.

Milosevic, J.; Gago, A.S.; Lopes, M.; Bento, R. (2013): "Experimental assessment of shear strength parameters on rubble stone masonry specimens", Construction and Building Materials, V. 47, pp. 1372-1380, October 2013.

Milosevic, J.; Lopes, M.; Gago, A.S.; Bento, R. (2013): "Testing and modeling the diagonal tension strength of rubble stone masonry panels", Engineering Structures, V. 52, pp. 581-591, July 2013.

Moldovan, I.D.; Cao, T.D.; Teixeira de Freitas, J.A. (2013): "Hybrid-Trefftz finite elements for biphasic elastostatics", Finite Elements in Analysis and Design, V. 66, pp. 68-82, April 2013.

Mota de Sá, F.; Oliveira, C.S.; Ferreira, M.A. (2013): "SIRIUS, Seismic Risk Indicator in Urban Space", Earthquake Spectra, V. 29, n.º 2, pp. 573-595, May 2013.

Neves, R.; Branco, F.; Brito, J. de (2013): "Field assessment of the relationship between natural and accelerated concrete carbonation resistance", Cement and Concrete Composites, V. 41, pp. 9-15, August 2013.

Nunes, F.; Correia, M.; Correia, J.R.; Silvestre, N.; Moreira, A. (2013): "Experimental and numerical study on the structural behavior of eccentrically loaded GFRP columns", Thin-Walled Structures, V. 72, pp. 175-187, November 2013.

Oliveira, R.; Brito, J. de; Veiga, R. (2013): "Incorporation of fine glass aggregates in renderings", Construction and Building Materials, V. 44, pp. 329-341, July 2013.

Pedro, D.; Brito, J. de; Veiga, R. (2013): "Mortars made with fine granulate from shredded tires", Journal of Materials in Civil Engineering, V. 25, n.º 4, pp. 519-529, April 2013.

Prates, J.C.; Fritzen, E.; Siqueira, S.W.M.; Braz, M.H.L.B.; Andrade, L.C.V. (2013): "Contextual web searches in Facebook using learning materials and discussion messages", Computers in Human Behavior, V. 29, n.º 2, pp. 386-394, March 2013.

Rodrigues, F.; Carvalho, M.T.; Evangelista, L.; Brito, J. de (2013): "Physical-chemical and mineralogical characterization of fine aggregates from construction and demolition waste recycling plants", Journal of Cleaner Production, V. 52, pp. 438-445, August 2013.

Rodrigues, M.C.M.; Oliveira, C.S. (2013): "Seismic zones for Azores based on statistical criteria", Natural Hazards and Earth System Sciences, V. 13, n.º 9, pp. 2337-2351, September 2013.

Rua, H.; Gonçalves, A.B.; Figueiredo, R.A. (2013): "Assessment of the Lines of Torres Vedras defensive system with visibility analysis", Journal of Archaeological Science, V. 40, n.º 4, pp. 2113-2123, April 2013.

Saldanha, R.; Júlio, E.N.B.S.; Dias-da-Costa, D.; Santos, P. (2013): "A modified slant shear test designed to enforce adhesive failure", Construction and Building Materials, V. 41, pp. 673-680, April 2013.

Sampaio, A.Z.; Rosário, D.; Gomes, A.R.; Santos, J.P. (2013): "Virtual Reality applied on Civil Engineering education: construction activity supported on interactive models", International Journal of Engineering Education, V. 29, n.º 6, pp. 1331-1347, November 2013.

Santos, P.; Laranja, G.; França, P.M.; Correia, J.R. (2013): "Ductility and moment redistribution capacity of multi-span T-section concrete beams reinforced with GFRP bars", Construction and Building Materials, V. 49, pp. 949-961, December 2013.

Santos, P.M.D.; Júlio, E.N.B.S. (2013): "A state-of-the-art review on roughness quantification methods for concrete surfaces", Construction and Building Materials, V. 38, pp. 912-923, January 2013.

Serpa, D.; Santos Silva, A.; Brito, J. de; Pontes, J.; Soares, D. (2013): "ASR of mortars containing glass", Construction and Building Materials, V. 47, pp. 489-495, October 2013.

Silva, A.; Dias, J.L.; Gaspar, P.L.; Brito, J. de (2013): "Statistical models applied to service life prediction of rendered façades", Automation in Construction, V. 30, pp. 151-160, March 2013.

Silva, A.; Gaspar, P.; Brito, J. de (2013): "Probabilistic analysis of the degradation evolution of stone wall cladding directly adhered to the substrate", Journal of Materials in Civil Engineering, V. 25, n.º 2, pp. 227-235, February 2013.

Silva, C.M.; Flores-Colen, I.; Gaspar, S. (2013): "Numerical analysis of renders’ adhesion using an interface model", Construction and Building Materials, V. 38, pp. 292-305, January 2013.

Silva, R.V.; Brito, J. de; Saikia, N. (2013): "Influence of curing conditions on the durability-related performance of concrete made with selected plastic waste aggregates", Cement and Concrete Composites, V. 35, n.º 1, pp. 23-31, January 2013.

Silvestre, J.D.; Brito, J. de; Pinheiro, M.D. (2013): "From the new European Standards to an environmental, energy and economic assessment of building assemblies from cradle-to-cradle (3E-C2C)", Energy and Buildings, V. 64, pp. 199-208, September 2013.

Silvestre, J.D.; Brito, J. de; Pinheiro, M.D. (2013): "Life-cycle impact ‘cradle to cradle’ of building assemblies", Proceedings of the ICE - Engineering Sustainability, V. 167, n.º 2, pp. 53-63, November 2013.

Silvestre, N.; Camotim, D. (2013): "Shear deformable Generalized Beam Theory for the analysis of thin-walled composite members", Journal of Engineering Mechanics-ASCE, V. 139, Special Issue: Stability of Composite Structures, pp. 1010-1024, May 2013.

Silvestre, N.; Camotim, D. (2013): "Generalized Beam Theory to analyze the vibration of open-section thin-walled composite members", Journal of Engineering Mechanics-ASCE, V. 139, Special Issue: Stability of Composite Structures, pp. 992-1009, May 2013.

Silvestre, N.; Dinis, P.B.; Camotim, D. (2013): "Developments on the design of cold-formed steel angles", Journal of Structural Engineering-ASCE, V. 139, n.º 5, pp. 680-694, May 2013.

Silvestre, N.; Pires, T.; Duarte, A.P.C. (2013): "Numerical analysis of semi-elliptical hollow section columns", Proceedings of the ICE - Structures and Buildings, V. 166, n.º 8, pp. 424-433, September 2013.

Teixeira de Freitas, J.A.; Cuong, P.T.; Faria, R.; Azenha, M. (2013): "Modelling of cement hydration in concrete structures with hybrid finite elements", Finite Elements in Analysis and Design, V. 77, pp. 16-30, December 2013.

Valarinho, L.; Correia, J.R.; Branco, F.A. (2013): "Experimental study on the flexural behaviour of multi-span transparent glass–GFRP composite beams", Construction and Building Materials, V. 49, pp. 1041-1053, December 2013.

Valença, J.; Dias-da-Costa, D.; Júlio, E.N.B.S.; Araújo, H.; Costa, H. (2013): "Automatic crack monitoring using photogrammetry and image processing", Measurement, V. 46, n.º 1, pp. 433-441, January 2013.

Valença, J.; Gonçalves, L.M.S.; Júlio, E.N.B.S. (2013): "Damage assessment on concrete surfaces using multi-spectral image analysis", Construction and Building Materials, V. 40, pp. 971-981, March 2013.

Vieira, R.F.; Virtuoso, F.B.E.; Pereira, E.B.R. (2013): "A higher order thin-walled beam model including warping and shear modes", International Journal of Mechanical Sciences, V. 66, pp. 66-82, January 2013.

Young, B.; Silvestre, N.; Camotim, D. (2013): "Cold-formed steel lipped channel columns influenced by local-distortional interaction: strength and DSM design", Journal of Structural Engineering-ASCE, V.139, n.º 6, pp. 1059-1074, June 2013.

2012

Adam, J.M.; Camotim, D.; Dunai, L; Marti, K.; Nikolos, I.K.; Pallarés, F.J.; Papadopoulou, M.P.; Saka, M.P.; Schuëller, G.I.; Vietor, T.; Tsompanakis, Y.; Topping, B.H.V. (2012): "Editorial", Advances in Engineering Software, V. 44, n.º 1, pp. 1-2.

Amatya, B.L.; Soga, K.; Bourne-Webb, P.J.; Amis, T.; Laloui, L. (2012): "Thermo-mechanical behaviour of energy piles", Géotechnique, V. 62, n.º 6, pp. 503-519.

Amorim, A.M.T.; Gonçalves, A.B.; Nunes, L.M.; Sousa, A.J. (2012): "Optimizing the location of weather monitoring stations using estimation uncertainty", International Journal of Climatology, V. 32, n.º 6, pp. 941-952.

Amorim, P.; Brito, J. de; Evangelista, L. (2012): "Concrete made with coarse concrete aggregate: influence of curing on durability", ACI Materials Journal, V. 109, n.º 2, pp. 195-204.

Areias, P.; Dias-da-Costa, D.; Pires, E.B.; Barbosa, J.I. (2012): "A new semi-implicit formulation for multiple-surface flow rules in multiplicative plasticity", Computational Mechanics, V. 49, n.º 5, pp. 545-564.

Areias, P.; Rabczuk, T.; Dias-da-Costa, D. (2012): "Asymmetric shell elements based on a corrected updated-Lagrangian approach", Computer Modeling in Engineering & Sciences, V. 88, n.º 6, pp. 475-506.

Areias, P.; Rabczuk, T.; Dias-da-Costa, D.; Pires, E.B. (2012): "Implicit solutions with consistent additive and multiplicative components", Finite Elements in Analysis and Design, V. 57, pp. 15-31.

Arruda, M.R.T.; Castro, L.M.S. (2012): "Structural dynamic analysis using hybrid and mixed finite element models", Finite Elements in Analysis and Design, V. 57, pp. 43-54.

Basaglia, C.; Camotim, D.; Silvestre, N. (2012): "Torsion warping transmission at thin-walled frame joints: kinematics, modelling and structural response", Journal of Constructional Steel Research, V. 69, n.º 1, pp. 39-53.

Besana-Ostman, G.M.; Vilanova, S.P.; Nemser, E.S.; Falcão Flôr, A.P.; Heleno, S.; Ferreira, H.; Fonseca, J.D. (2012): "Large Holocene Earthquakes in the Lower Tagus Valley Fault Zone, Central Portugal", Seismological Research Letters, V. 83, n.º 1, pp. 67-76.

Bhatt, C.; Bento, R. (2012): "Comparison of nonlinear static methods for the seismic assessment of plan irregular frame buildings with non seismic details", Journal of Earthquake Engineering, V. 16, n.º 1, pp. 15-39.

Bodas Freitas, T.M.; Potts, D.M.; Zdravkovic, L. (2012): "Implications of the definition of the Phi function in elastic-viscoplastic models", Géotechnique, V. 62, n.º 7, pp. 643-648.

Bodas Freitas, T.M.; Potts, D.M.; Zdravkovic, L. (2012): "The effect of creep on the short-term bearing capacity of pre-loaded footings", Computers and Geotechnics, V. 42, pp. 99-108.

Bogas, J.A.; Gomes, A.; Gomes, M.G. (2012): "Estimation of water absorbed by expanding clay aggregates during structural lightweight concrete production", Materials and Structures, V. 45, n.º 10, pp. 1565-1576.

Bogas, J.A.; Gomes, A.; Pereira, M.F.C. (2012): "Self-compacting lightweight concrete produced with expanded clay aggregate", Construction and Building Materials, V. 35, pp. 1013-1022.

Bogas, J.A.; Maurício, A.; Pereira, M.F.C. (2012): "Microstructural analysis of Iberian expanded clay aggregates", Microscopy and Microanalysis, V. 18, n.º 5, pp. 1190-1208.

Braga, M.; Brito, J. de; Veiga, R. (2012): "Incorporation of fine concrete aggregates in mortars", Construction and Building Materials, V. 36, pp. 960-968.

Branco, M.; Guerreiro, L.; Mahesh, K.K.; Braz Fernandes, F.M. (2012): "Effect of load cycling on the phase transformations in Ni–Ti wires for civil engineering applications", Construction and Building Materials, V. 36, pp. 508-519.

Bravo, M.; Brito, J. de (2012): "Concrete made with used tyre aggregates: durability-related performance", Journal of Cleaner Production, V. 25, n.º 4, pp. 42-50.

Cabral-Fonseca, S.; Correia, J.R.; Rodrigues, M.P.; Branco, F.A. (2012): "Artificial accelerated ageing of GFRP pultruded profiles made of polyester and vinylester resins: characterisation of physical-chemical and mechanical damage", Strain, V. 48, n.º 2, pp. 162-163.

Camotim, D.; Andrade, A.; Basaglia, C. (2012): "Some thoughts on a surprising result concerning the lateral-torsional buckling of monosymmetric I-section beams", Thin-walled Structures, V. 60, pp. 216-221.

Cardoso, R.; Maranha das Neves, E. (2012): "Hydro-mechanical characterization of lime-treated and untreated marls used in a motorway embankment", Engineering Geology, V. 133-134, pp. 76-84.

Cardoso, R.; Maranha das Neves, E.; Alonso, E.E. (2012): "Experimental behaviour of compacted marls", Géotechnique, V. 62, n.º 11, pp. 999-1012.

Castiglioni, C.A.; Kanyilmaz, A.; Calado, L. (2012): "Experimental analysis of seismic resistant composite steel frames with dissipative devices", Journal of Constructional Steel Research, V. 76, pp. 1-12.

Coelho, A.; Brito, J. de (2012): "Influence of construction and demolition waste management on the environmental impact of buildings", Waste Management, V. 32, n.º 3, pp. 532-541.

Correia, J.R.; Marques, A.M; Pereira, C.M.C.; Brito, J. de (2012): "Fire reaction properties of concrete made with recycled rubber aggregate", Fire and Materials, V. 36, n.º 2, pp. 139-152.

Costa, A.A.; Arede, A.; Costa, A.; Oliveira, C.S. (2012): "Out-of-plane behaviour of existing stone masonry buildings: experimental evaluation", Bulletin of Earthquake Engineering, V. 10, n.º 1, pp. 93-111.

Costa, A.A.; Tavares, L.V. (2012): "Social e-business and the Satellite Network model: Innovative concepts to improve collaboration in construction", Automation in Construction, V. 22, Sp. Issue, pp. 387-397.

Costa, H.; Júlio, E.; Lourenço, J. (2012): "New approach for shrinkage prediction of high-strength lightweight aggregate concrete", Construction and Building Materials, V. 35, n.º 1, pp. 84-91.

Cruz, C.O.; Marques, R. (2012): "Risk-sharing in seaport terminal concessions: contractual diversity in Portugal", Transport Reviews, V. 32, n.º 4, pp. 455-471.

Cruz, C.O.; Marques, R. (2012): "Using probabilistic methods to estimate the public sector comparator", Computer-Aided Civil and Infrastructure Engineering, V. 27, n.º 10, pp. 782-800.

Dias-da-Costa, D.; Alfaiate, J.; Júlio, E.N.B.S. (2012): "FE modeling of the interfacial behaviour of composite concrete members", Construction and Building Materials, V. 26, n.º 1, pp. 233-243.

Dinis, P.B.; Batista, E.M.; Camotim, D.; Santos, E. dos (2012): "Local-distortional-global interaction in lipped channel columns: Experimental results, numerical simulations and design considerations", Thin-walled Structures, V. 61, pp. 2-13.

Dinis, P.B.; Camotim, D.; Silvestre, N. (2012): "On the mechanics of thin-walled angle column instability", Thin-walled Structures, V. 52, pp. 80-89.

Duţu, A.; Ferreira, J.G.; Guerreiro, L.; Branco, F.; Gonçalves, A.M. (2012): "Timbered masonry for earthquake resistance in Europe", Materiales de Construcción, V. 62, pp. 615-628.

Estêvão, J.M.C.; Sousa Oliveira, C. (2012): "Point and fault rupture stochastic methods for generating simulated accelerograms considering soil effects for structural analysis", Soil Dynamics and Earthquake Engineering, V. 43, pp. 329-341.

Ferreira, L.; Brito, J. de; Saikia, N. (2012): "Influence of curing conditions on the mechanical performance of concrete containing recycled plastic aggregate", Construction and Building Materials, V. 36, pp. 196-204.

Firmo, J.P.; Correia, J.R.; França, P. (2012): "Fire behaviour of reinforced concrete beams strengthened with CFRP laminates: Protection systems with insulation of the anchorage zones", Composites Part B-Engineering, V. 43, n.º 3, pp. 1545-1556.

Gaião, C.; Brito, J. de; Silvestre, J. (2012): "Technical Note: Gypsum plasterboard walls: inspection, pathological characterization and statistical survey using an expert system", Materiales de Construcción, V. 62, n.º 306, pp. 285-297.

Garcez, N.; Lopes, N.; Brito, J. de; Sá, G. (2012): "Pathology, diagnosis and repair of pitched roofs with ceramic tiles: statistical characterisation and lessons learned from inspections", Construction and Building Materials, V. 36, pp. 807-819.

Garcez, N.; Lopes, N.; Brito, J. de; Silvestre, J. (2012): "System of inspection, diagnosis and repair of external claddings of pitched roofs", Construction and Building Materials, V. 35, pp. 1034-1044.

Garrido, M.A.; Paulo, P.V.; Branco, F.A. (2012): "Service life prediction of facade paint coatings in old buildings", Construction and Building Materials, V. 29, pp. 394-402.

Gil, J.; Beirão, J.N.; Montenegro, N.; Duarte, J.P. (2012): "On the discovery of urban typologies: data mining the many dimensions of urban form", Urban Morphology, V. 16, n.º 1, pp. 27-40.

Gomes, M.G.; Rodrigues, A.M.; Bogas, J.A. (2012): "Numerical and experimental study of the optical properties of venetian blinds", Journal of Building Physics, V. 36, n.º 1, pp. 7-34.

Gonçalves, L.; Fonte, C.; Júlio, E.; Caetano, M. (2012): "The application of uncertainty measures in the training and evaluation of supervised classifiers", International Journal of Remote Sensing, V. 33, n.º 9, pp. 2851-2867.

Gonçalves, R.; Camotim, D. (2012): "Geometrically non-linear generalised beam theory for elastoplastic thin-walled metal members", Thin-walled Structures, V. 51, pp. 121-129.

Graça-e-Costa, R.; Alfaiate, J.; Dias-da-Costa, D.; Sluys, L.J. (2012): "A non-iterative approach for the modelling of quasi-brittle materials", International Journal of Fracture, V. 178, n.º 1-2, pp. 281-298.

Henriques, G.C.; Duarte, J.P.; Leal, V. (2012): "Strategies to control daylight in a responsive skylight system", Automation in Construction, V. 28, pp. 91-105.

Jorge, S.; Dias-da-Costa, D.; Júlio, E.N.B.S. (2012): "Influence of anti-corrosive coatings on the bond of steel rebars to repair mortars", Engineering Structures, V. 36, pp. 372-378.

Mari, J.-L.; Mendes, M. (2012): "High resolution 3D near surface imaging of fracture corridors and cavities by combining Plus-Minus method and refraction tomography", Near Surface Geophysics, V. 10, n.º 3, pp. 185-195.

Marques, P.; Costa, A., Lanata, F. (2012): "Service life of RC structures: chloride induced corrosion: prescriptive versus performance-based methodologies", Materials and Structures, V. 4, pp. 277–296.

Martins, J.A.C.; Simões, F.M.F.; Pinto da Costa, A. (2012): "Assessing the '(in)stability of quasi-static paths'", International Journal of Engineering Science, V. 55, pp. 18-34.

Matos, B.; Correia, J.R.; Castro, L.M.S.; França, P. (2012): "Structural response of hyperstatic concrete beams reinforced with GFRP bars: Effect of increasing concrete confinement", Composite Structures, V. 94, n.º 3, pp. 1200-1210.

Maunder, E.A.W.; Almeida, J.P.M. (2012): "Recovery of equilibrium on star patches from conforming finite elements with a linear basis", International Journal for Numerical Methods in Engineering, V. 89, n.º 12, pp. 1497-1526.

Meireles, H.; Bento, R.; Cattari, S.; Lagomarsino, S. (2012): "A hysteretic model for “frontal” walls in Pombalino buildings", Bulletin of Earthquake Engineering, V. 10, n.º 5, pp. 1481-1502.

Moldovan, I.D.; Freitas, J.A.T. (2012): "Hybrid-Trefftz displacement and stress elements for bounded poroelastic media", Computers and Geotechnics, V. 42, pp. 129-144.

Monteiro, I.; Branco, F. A.; Brito, J. de; Neves, R. (2012): "Statistical analysis of the carbonation coefficient in open air concrete structures", Construction and Building Materials, V. 26, n.º 1, pp. 263-269.

Morgado, F.; Grandão Lopes, J.; Brito, J. de; Feiteira, J. (2012): "Portuguese irrigation canals: lining solutions, anomalies and rehabilitation", Journal of Performance of Constructed Facilities, V. 26, n.º 4, pp. 507-515.

Nader, M.F.; Igel, H.; Ferreira, A.M.G.; Kurrle, D.; Wassermann, J.; Schreiber, K.U. (2012): "Toroidal free oscillations of the Earth observed by a ring laser system: a comparative study", Journal of Seismology, V. 16, n.º 4, pp. 745-755.

Natário, P.; Silvestre, N.; Camotim, D. (2012): "Localized web buckling analysis of beams subjected to concentrated loads using GBT", Thin-Walled Structures, V. 61, pp. 27-41.

Neto, N.; Brito, J. de (2012): "Validation of an inspection and diagnosis system for anomalies in natural stone cladding (NSC)", Construction and Building Materials, V. 30, n.º 5, pp. 224-236.

Neves, F.; Costa, A.; Vicente, R.; Oliveira, C.S.; Varum, H. (2012): "Seismic vulnerability assessment and characterisation of the buildings on Faial Island, Azores", Bulletin of Earthquake Engineering, V. 10, n.º 1, pp. 27-44.

Neves, R.; Branco, F.A.; Brito, J. de (2012): "A method for the use of accelerated carbonation tests in durability design", Construction and Building Materials, V. 36, pp. 585-591.

Neves, R.; Branco, F.A.; Brito, J. de (2012): "About the statistical interpretation of air permeability assessment results", Materials and Structures, V. 45, n.º 4, pp. 529-539.

Oliveira, C.S.; Cakti, E.; Stengel, D.; Branco, M. (2012): "Minaret behavior under earthquake loading: the case of historical Istanbul", Earthquake Engineering & Structural Dynamics, V. 41, n.º 1, pp. 19-39.

Oliveira, C.S.; Ferreira, M.A.; de Sá, F.M. (2012): "The concept of a disruption index: application to the overall impact of the July 9, 1998 Faial earthquake (Azores islands)", Bulletin of Earthquake Engineering, V. 10, n.º 1, pp. 7-25.

Palha, F.; Pereira, A.; Brito, J. de; Silvestre, J. (2012): "Effect of water on the degradation of gypsum plaster coatings: inspection, diagnosis and repair", Journal of Performance of Constructed Facilities, V. 26, n.º 4, pp. 424-432.

Palma, P.; Garcia, H.; Ferreira, J.; Appleton, J.; Cruz, H. (2012): "Behaviour and repair of carpentry connections - Rotational behaviour of the rafter and tie beam connection in timber roof structures", Journal of Cultural Heritage, V. 13, n.º 3, pp. S64-S73.

Penteado, M.L.; Brito, J. de (2012): "Expert knowledge-based selection methodology for optimizing the construction of concrete piles", Journal of Performance of Constructed Facilities, V. 26, n.º 1, pp. 95-103.

Pereira, P.; Evangelista, L.; Brito, J. de (2012): "The effect of superplasticisers on the workability and compressive strength of concrete made with fine concrete aggregates", Construction and Building Materials, V. 28, n.º 1, pp. 722-729.

Pereira, P.; Evangelista, L.; Brito, J. de (2012): "The effect of superplasticizers on the mechanical performance of concrete made with fine recycled concrete aggregates", Cement and Concrete Composites, V. 34, n.º 9, pp. 1044-1052.

Pinto da Costa, A. (2012): "Assessing the complete solution set of the planar frictional wedging problem", Computer Methods in Applied Mechanics and Engineering, V. 205, pp. 139-148.

Pinto, A.P.F.; Rodrigues, J.D. (2012): "Consolidation of carbonate stones: Influence of treatment procedures on the strengthening action of consolidants", Journal of Cultural Heritage, V. 13, n.º 2, pp. 154-166.

Proença, J.; Gago, A.S.; Cardoso, J.; Coias, V.; Paula, R. (2012): "Development of an innovative seismic strengthening technique for traditional load-bearing masonry walls", Bulletin of Earthquake Engineering, V. 10, n.º 1, pp. 113-133.

Raous, M.; Laursen, T.; Marques, M.M.; Pires, E.B.; Wriggers, P. (2012): "Preface", Computer Methods in Applied Mechanics and Engineering, V. 205-208, pp. 1-2.

Regateiro, F.; Bento, J.; Dias, J. (2012): "Floor plan design using block algebra and constraint satisfaction", Advanced Engineering Informatics, V. 26, n.º 2, pp. 361-382.

Rodrigues, L.B.; Las Casas, E.B.; Lopes, D.S.; Folgado, F.; Fernandes, P.R.; Pires, E.B.; Alves, G.E.S.; Faleiros, R.R. (2012): "A finite element model to simulate femoral fracture in calves: Testing different polymers for intramedullary interlocking nails", Veterinary Surgery, V. 41, n.º 7, pp. 838-844.

Saikia, N.; Brito, J. de (2012): "Use of plastic waste as aggregate in cement mortar and concrete preparation: a review", Construction and Building Materials, V. 34, pp. 385-401.

Saikia, N.; Cornelis, G.; Cizer, Ö.; Vandecasteele, C.; Van Gemert, D.; Van Balen, K.; Van Gerven, T. (2012): "Use of Pb blast furnace slag as a partial substitute for fine aggregate in cement mortar", Journal of Material Cycles and Waste Management, V. 14, n.º 2, pp. 102-112.

Saikia, N.; Kato, S.; Kojima, T. (2012): "Influence of Sn on the hydration of tricalcium aluminate, Ca3Al2O6", Journal of Thermal Analysis and Calorimetry, V. 109, n.º 1, pp. 273-286.

Santos, D.S.; Santos, P.M.D.; Dias-da-Costa, D. (2012): "Effect of surface preparation and bonding agent on the concrete-to-concrete interface strength", Construction and Building Materials, V. 37, pp. 102-110.

Santos, E.S. dos; Batista, E.M.; Camotim, D. (2012): "Experimental investigation concerning lipped channel columns undergoing local-distortional-global buckling mode interaction", Thin-walled Structures, V. 54, pp. 19-34.

Santos, P.M.D.; Júlio, E.N.B.S. (2012): "A state-of-the-art review on shear-friction", Engineering Structures, V. 45, pp. 435-448.

Silva, A.; Brito, J. de; Gaspar, P. (2012): "Application of the factor method to maintenance decision support for stone cladding", Automation in Construction, V. 22, n.º 3, pp. 165-174.

Silva, C.M.; Castro, L.M.S.S. (2012): "Damage analysis of concrete structures using polynomial wavelets", Advances in Engineering Software, V. 50, pp. 69-81.

Silvestre, N. (2012): "On the accuracy of shell models for torsional buckling of carbon nanotubes", European Journal of Mechanics A-Solids, V. 32, pp. 103-108.

Silvestre, N.; Camotim, D.; Dinis, P.B. (2012): "Post-buckling behaviour and direct strength design of lipped channel columns experiencing local/distortional interaction", Journal of Constructional Steel Research, V. 73, pp. 12-30.

Silvestre, N.; Faria, B.; Lopes, J.N.C. (2012): "A molecular dynamics study on the thickness and post-critical strength of carbon nanotubes", Composite Structures, V. 94, n.º 4, pp. 1352-1358.

Torgal, F.P.; Miraldo, S.; Labrincha, J.A.; Brito, J. de (2012): "An overview on concrete carbonation in the context of eco-efficient construction: evaluation, use of SCMs and/or RAC", Construction and Building Materials, V. 36, pp. 141-150.

Valadares, F.; Bravo, M.; Brito, J. de (2012): "Concrete with used tire rubber aggregates: mechanical performance", ACI Materials Journal, V. 109, n.º 3, pp. 283-292.

Valença, J.; Dias-da-Costa, D.; Júlio, E.N.B.S. (2012): "Characterisation of concrete cracking during laboratorial tests using image processing", Construction and Building Materials, V. 28, n.º 1, pp. 607-615.

Valença, J.; Júlio, E.N.B.S.; Araújo, H. (2012): "Applications of photogrammetry to structural assessment", Experimental Techniques, V. 36, n.º 1, pp. 71-81.

Van Goethem, N.; Areias, P. (2012): "A damage-based temperature-dependent model for ductile fracture with finite strains and configurational forces", International Journal of Fracture, V. 178, n.º 1-2, pp. 215-232.

Vaz Rodrigues, R. (2012): "Influence of yielding of flexural reinforcement on shear transfer through cracks", Magazine of Concrete Research, V. 64, n.º 9, pp. 751-765.

Veludo, J.; Dias-da-Costa, D.; Júlio, E.N.B.S.; Pinto, P.L. (2012): "Bond strength of textured micropiles grouted to concrete footings", Engineering Structures, V. 35, n.º 1, pp. 288-295.

Veludo, J.; Júlio, E.N.B.S.; Dias-da-Costa, D. (2012): "Compressive strength of micropile-to-grout connections", Construction and Building Materials, V. 26, n.º 1, pp. 172-179.

Vilanova, S.P.; Fonseca, J.F.B.D.; Oliveira, C.S. (2012): "Ground-motion models for seismic-hazard assessment in Western Iberia: constraints from instrumental data and intensity observations", Bulletin of the Seismological Society of America, V. 102, n.º 1, pp. 169-184.

Weston, J.; Ferreira, A.M.G.; Funning, G.J. (2012): "Systematic comparisons of earthquake source models determined using InSAR and seismic data", Tectonophysics, V. 532-535, pp. 61-81.

Attachments

• papers_icist_2007-15