Cap. Livros

Maia, I., Rocha, C., Pontes, P. Cardoso, V., Miranda , J.M., Moita, A.S., Minas, G., Moreira, A.L.N., Lima, R. (2020) Heat transfer and fluid flow investigations in PDMS microchannel heat sinks fabricated by means of a low cost 3D printer. In: ?Advances in Microfluidic Technologies for Energy and Environmental Applications", IntechOpen, (In press).  http://dx.doi.org/10.5772/intechopen.89735 

Moita, A.S., Pontes, P., Teodori, E. Moreira, A.L.N., Panão, M.R.O. (2019) Challenges and advances in measuring temperatures at liquid-solid interfaces. The art of measuring in thermal sciences. Ed. J. Meyer and M. de Paepe. CRC Press/Taylor & Francis (To appear).

Moita, A.S., Jacinto, F., Mata, F. Moreira, A.L.N. (2019) Design and optimization of an open configuration microfluidic device for clinical diagnostics. A. Cliquet jr. et al. (Eds.): BIOSTEC 2018, CCIS 1024, pp. 1?16, 2019. DOI: https://doi.org/10.1007/978-3-030-29196-9_3


Moita, A.S., Vieira, D., Mata, F., Moreira, A.L.N. (2018) Microfluidic devices integrating alternative clinical diagnostic techniques based on cell mechanical properties. Biomedical Engineering Systems and Technologies. Series: Communications in Computer and Information Science, Chapter 4: Microfluidic Devices Integrating Clinical Alternative Diagnostic Techniques Based on Cell Mechanical Properties, N. Peixoto et al. (Eds.), Springer International Publishing AG, part of Springer Nature, 881, pp. 74-93. DOI: https://doi.org/10.1007/978-3-319-94806-5_4

Malavasi, I., Teodori, E., Moita, A.S., Moreira, A.L.N., Marengo, M. (2018) Wettability effect on pool boiling: a review. Encyclopaedia of Two-Phase Heat Transfer and Flow III: Macro And Micro Flow Boiling And Numerical Modeling Fundamentals (A 4-volume Set), Vol. 4, Edited by J. Thome, World Scientific Publishing Co Pte Ltd. ISBN: 978-981-3227-31-6.

Moreira, A. L. N., Moita, A. S. (2011) Chapter 8 ? ?Droplet impact on a solid surface?, in: ?Handbook of atomization and sprays: theory and applications?, Ed. Nasser Ashgriz, Springer, pp. 183-211. DOI: 10.1007/978-1-4419-7264-4_8.

 

Publicaçoes revista

Leonardo, L.L., Moita, A.S., Souza, R.R., Cardoso, E.M. (2020) Effect of coper foam thickness on pool boiling heat transfer of HFE-7100. International Journal of Heat and Mass Transfer, 152:119547.

    https://doi.org/10.1016/j.ijheatmasstransfer.2020.119547

    Pontes, P., Cautela, R., Teodori, E., Moita, A.S., Liu, Y., Moreira, A.L.N., Nikulin, A. Del Barrio, E. (2020) Effect of pattern geometry on bubble dynamics and heat transfer on biphilic surfaces. Experimental Thermal and Fluid Science, 115(1):110088.

      https://doi.org/10.1016/j.expthermflusci.2020.110088

      Harrison, M., Moita, A., Gess, J. (2020) Characterization of net coolant flow rate to copper boiling surfaces using two-phase Particle Image Velocimetry and dielectric fluid. Heat and Mass Transfer (Springer). (In press. Published online on 23 January 2020). https://doi.org/10.1007/s00231-020-02812-1

        Pontes, P., Liang, Q. J., Matos, F. M., Moita, A. S., Ribeiro, A. P. C., Moreira, A. L. N. (2020) Heat transfer and fluid dynamics of nanofluid droplets impacting on a smooth heated surface: detailing temporal scale effects by using time resolved thermography. Accepted for publication at Heat Transfer Engineering.

          Li, X., Wang, G., Moita, A. S., Zhang, C., Wang, S., Liu, Y. (2020) Fabrication on bio-inspired non-fluorinated superhydrophobic surfaces with anti-icing property and its wettability transformation analysis. Applied Surface Science, 505:144386 (Available online since 25 October 2019) DOI: https://doi.org/10.1016/j.apsusc.2019.144386

          Andrade, F., Moita, A. S., Nikulin, A., Moreira, A. L. N., Santos, H. (2019) Experimental investigation on heat transfer and pressure drop of internal flow in corrugated tubes. International Journal of Heat and Mass Transfer, 140:940-955 https://doi.org/10.1016/j.ijheatmasstransfer.2019.06.025

          Maly, M., Moita, A.S., Jedelsky, J., Ribeiro, A.P.C., Moreira, A. L. N. (2019) Effect of nanoparticles concentration on the characteristics of nanofluid sprays for cooling applications. Journal of Thermal Analysis and Calorimetry, 135:3375-3386 (Published online 12 June 2018).
          https://doi.org/10.1007/s10973-018-7444-z
           
          Nikulin, A., Moita, A.S., Moreira, A.L.N., Murshed, S.M.S., Huminic, A., Grosu, Y., Faik, A., Nieto-Maestre, J., Khliyeva, O. (2019) Effect of Al2O3 nanoparticles on laminar, transient and turbulent flow of isopropyl alcohol. International Journal of Heat and Mass Transfer, 130:1032-1044.
          https://doi.org/10.1016/j.ijheatmasstransfer.2018.10.114

          Chun, S., Chengchun, Z., Meihong, G., Xueli, L., Yan, L. Luquan, R., Moita, A.S. (2018) Investigation of effects of receding contact angle and energy conversion on numerical prediction of receding of the droplet impact onto hydrophilic and superhydrophilic surfaces. International Journal of Heat and Fluid Flow, 74:89-109.

          https://doi.org/10.1016/j.ijheatfluidflow.2018.09.015


          Teodori, E., Pontes, P., Moita, A.S., Moreira, A.L.N. (2018) Thermographic analysis of interfacial heat transfer mechanisms on droplet/wall interactions with high temporal and spatial resolution, Experimental Thermal and Fluid Science, 96:284-294. https://doi.org/10.1016/j.exptherm?usci.2018.03.013

          Abreu, V., Harrison, M., Gess, J., Moita, A.S. (2018) Two-phase thermosiphon cooling using integrated heat spreaders with copper microstructures. Proc of the IEEE ITherm, pp.645-652. DOI: 10.1109/ITHERM.2018.8419644.

          Teodori, E., Pontes, P., Moita, A.S., Moreira, A.L.N. (2018) On the process of bubble growing and departure on hydrophilic, superhydrophobic and biphilic surfaces. Proc. ASME - IHTC-16, pp. 705-712, DOI: 10.1615/IHTC16.bae.022252

          Teodori, E., Andredaki, M., Georgoulas, A., Moita, A.S., Moreira, A.L.N., Marengo, M. (2018) Enhanced VOF-based direct numerical simulations of slug flow boiling within micro-channels with smooth and finned heated walls. Proc. ASME - IHTC-16, pp. 6503-6510. DOI: 10.1615/IHTC16.mpf.023596

          Teodori, E., Moita, A. S., Pontes, P., Moura, M., Moreira, A. L. N., Y. Bai, X. Li, Y. Liu (2017) Application of bioinspired superhydrophobic surfaces in two-phase heat transfer experiments. Journal of Bionic Engineering, 14:506-519.

          Teodori, E., Pontes, P., Moita, A., Georgoulas, A., Marengo, Moreira, A. (2017) Sensible heat transfer during droplet cooling: Experimental and numerical analysis. Energies, 10(6):790(27pag).

            Santos, H., Morgado, J., Martinho, M., Pereira, F., Moita, A.S. (2017) Selecting and optimizing a heat exchanger for automotive vehicle Rankine Cycle Waste Recovery Heat Systems. Energy Procedia, 107, 390-397.

                  Teodori, E., Valente, T., Malavasi, I., Moita, A.S., Marengo, M, Moreira, A. L. N. (2017) Effect of extreme wetting scenarios on pool boiling conditions.  Applied Thermal Engineering, 115:1424-1437. http://dx.doi.org/10.1016/j.applthermaleng.2016.11.079

                        Liu, Y., Yao, W., Wang, Y., Moita, A., Han, Z., Ren, L. (2016) Reversibly switchable wettability on aluminium substrate corresponding to different pH droplet and its corrosion resistance. Chemical Engineering Journal, 303:565-574.

                            Moita, A.S., Laurência, C., Ramos, J.A., Prazeres, D.M.F., Moreira, A.L.N. (2016) Dynamics of droplets of biological fluids on smooth superhydrophobic surfaces under electrostatic actuation. Journal of Bionic Engineering, 13(2):220-234.

                            Teodori, E., Palma, T., Valente, T., Moita, A.S., Moreira, A.L.N. (2016) Bubble dynamics and heat transfer for pool boiling on hydrophilic, superhydrophobic and biphilic surfaces. Accepted for publication at the Journal of Physics: Conf. Series, 745(3):032132. doi:10.1088/1742-6596/745/3/032132.

                              Moita, A.S., Herrmann, D., Moreira, A.L.N. (2015) Heat and mass transfer at interfaces between solid surfaces and non-Newtonian liquid droplets. Applied Thermal Engineering, 88:33-46. DOI:10.1016/j.applthermaleng.2014.11.042.

                                Moita, A. S., Teodori, E., Moreira, A. L. N. (2015) Influence of surface topography in the boiling mechanisms. International Journal of Heat and Fluid Flow, 52:50-63. DOI: 10.1016/j.ijheatfluidflow.2014.11.003

                                  Teodori, E., Moita, A. S., Moreira, A. L. N. (2014) Empirical and modelling based correlations for pool boiling over micro-structured surfaces. Journal of Interfacial Phenomena and Heat Transfer (Begell House), 2(3), 273:292.

                                    DOI: 10.1615/InterfacPhenomHeatTransfer.2015011663.

                                    Pereira P., Moita, A. S., Monteiro, G., Prazeres, D.M.F. (2014) Characterization of English weed leaves and biomimetic replicas. Journal of Bionic Engineering, 11(3):346-359. DOI: 10.1016/S1672-6529(14)60048-2.

                                      Teodori, E., Moita, A.S., Moreira, A. L. N. (2013) Characterization of pool boiling mechanisms over micro-patterned surfaces using PIV. International Journal of Heat and Mass Transfer, 66:261-270. DOI: 10.1016/j.ijheatmasstransfer.2013.07.033.

                                        Moita, A. S., Teodori, E., Moreira, A. L. N. (2012) Enhancement of pool boiling heat transfer by surface micro-structuring, Journal of Physics: Conf. Series 395: 012175 (2012) DOI: 10.1088/1742-6596/395/1/012175.

                                          Moita, A. S., Moreira, A. L. N. (2012) Scaling the effects of surface topography in the secondary atomization resulting from droplet/wall interactions. Experiments in Fluids, 52(3):679-695. DOI: 10.1007/s00348-011-1106-2.

                                            Moreira, A. L. N., Moita, A. S., Panão, M. R. (2010) Advances and challenges in explaining fuel spray impingement: how much of single droplet impact research is useful? Progress in Energy and Combustion Science, 36:554-580. DOI: 10.1016/j.pecs.2010.01.002.

                                              Moita, A. S., Moreira, A. L. N., Roisman, Ilia (2010) Heat transfer during drop impact onto a heated surface. Proceedings of the ASME International Heat Transfer Conference - IHTC ? 14, 6:803-810. DOI: 10.1115/IHTC14-23202 .

                                              Freitas, P.P., Cardoso, F.A., Martins, V.C:, Martins, S.A.M., Loureiro, J., Amaral, J., Chaves, R.C., Cardoso, S., Germano, J., Piedade, M.S., Sebastião, A.M., Fonseca, L.F., Pannetier-Lecoeur, M., Fermon, C. (2012) Spintronic platforms for biomedical applications, Lab-on-Chip, 12 (3), pp. 546 ? 557.

                                              Bi, H., Duarte, C.M., Brito, M., Vilas-Boas, V., Cardoso, S., Freitas, P.P. (2016) Performance Enhanced UV/vis Spectroscopic Microfluidic Sensor for Ascorbic Acid Quantification in Human Blood. Biosensors & Bioelectronics, 85, pp. 568-572.

                                                Moita, A. S., Moreira, A. L. N. (2009) Development of empirical correlations to predict the secondary droplet size of impacting boiling droplets. Experiments in Fluids, 47:755-768. DOI: 10.1007/s00348-009-0719-1.

                                                  Moreira, A. L. N., Moita, A. S., Cossali, G. E., Marengo, M., Santini, M. (2007) Secondary atomization of water and isooctane drops impinging onto tilted heated surfaces. Experiments in Fluids, 43:297-313. DOI: 10.1007/s00348-007-0330-2.

                                                  Moita, A. S., Moreira, A. L. N. (2007) Drop impacts onto cold and heated rigid surfaces: morphological comparisons, disintegration limits and secondary atomization. International Journal of Heat and Fluid Flow, 20:735-752. DOI: 10.1016/j.ijheatfluidflow.2006.10.004.

                                                  Moita, A. S., Moreira, A. L. N. (2007) Experimental study on fuel drop impacts onto rigid surfaces: morphological comparisons, disintegration limits and secondary atomization. Proceedings of the Combustion Institute, 31:2175-2183. DOI: 10.1016/j.proci.2006.07.150.

                                                  Moita, A. S. Moreira, A. L. N. (2005) The interaction of Fuel Droplets with Heated Interposed Surfaces in IC Engines, SAE Technical Paper Series, No. 2005-24-084. DOI: 10.4271/2005-24-084.

                                                  Moita, A. S., Moreira, A. L. N. (2002) The deformation of single droplets impacting onto a flat surface. SAE 2002 Transactions ? Journal of Fuels and Lubrificants, pp. 1477-1490. DOI: 10.4271/2002-01-2749.


                                                    Artigos em Proceedings

                                                    Bohinikova, A., Maia, I., Smieskova, M., Buganova, A., Moita, A.S., Cimrak, I., Lima, R. (2020) Assessment of computational cell mode benefits for optimization of microfluidic devices. 13th International Joint Conference on Biomedical Engineering Systems and Technologies, Biodevices 2020, 24-26 February, Valletta, Malta. DOI: 10.5220/0009173202800287.

                                                    Pontes, P., Moita, A. S., Moreira, A.L.N. (2020) Design optimization of microchannel geometry using a genetic algorithm parallel with Openfoam. Accepted to be presented at the 15th Int. Conf. on Heat Transfer, Fluid Mechanics and Thermodynamics, 20-22 July,  Amsterdam, Netherlands

                                                    Gonçalves, I., Caldeira, C., Moita, A.S., Lima, R., Moreira, A. L. N. (2019) Predicting cell deformability behaviour from analogue fluids in microfluidic devices. 3rd Workshop on modeling of biological cells, fluid flow and microfluidics, Vratna, Slovakia, 9-13 Feb. 2020.

                                                    Pontes, P., Freitas, E., Cautela, R., Moita, A.S., Miranda, J., Lima, R., Ribeiro, A.P.C., Moreira, A.L.N. (2021) Pool boiling of nanofluids on biphilic surfaces. To be presented at the 3rd Int. Conf. on Interfacial Phenomena and Heat-Mass-Transfer, 5-9 July, Marseille, France.

                                                    L. L. Manetti, A. S. Moita, E. M. Cardoso (2020) A predictive model for nucleate boiling heat transfer coefficient of dielectric fluids on metal foams. 5th Thermal and Fluids Engineering Conference - TFEC 2020, 5-8 Abril 2020, New Orleans, L.A., USA.

                                                    Moita, A. S., Caldeira, C., Jacinto, F., Lima, R., Vega, E. J., Moreira, A.L.N. (2019) Cell deformability studies for clinical diagnostics: tests with blood analogue fluids using a drop based microfluidic device. 12th International Conference on Biomedical Electronics and Devices ? Volume 1: BIODEVICES 2019, 00. 99-107, ISBN: 978-989-758-353-7, pp.99-106, 22-24 February, Prague, Czech Republic.

                                                    Zhelezny, V., Khliyeva, O., Nikulin, A., Nikulina, A., Motovoy, I., Melnyk, O., Borisov, V., Dias, S.I.G., Moita, A., Moreira, A.L. (2019) Effect of fullerenes C60 on heat capacity, density, thermal conductivity and viscosity of tetralin. 6th International Conference: Thermophysical and Mechanical Properties of Advanced Materials, THERMAN 2019, 22-24 September, Cesme, Izmir, Turkey.

                                                    Pontes, P., Cautela, R., Teodori, E., Moita, A. S., Moreira, A.L.N. (2019) Bubble dynamics and heat transfer on biphilic surfaces. 10th International Conference on Multiphase Flow ? ICMF 2019, 19-24 May, Rio de Janeiro, Brasil.

                                                    Pontes, P., Cautela, R., Moita, A. S., Teodori, E., Moreira, A.L.N., Liu, Y. (2019) Development and test of biphilic surfaces with biomimetic patterns for heat transfer enhancement. 6th International Conference of Bionic Engineering ? ICBE 2019, Jilin University, 23-26 September, Changchun, China.

                                                    Pontes, P., Cautela, R. Teodori, E., Moita, A. S., Georgoulas, A., Moreira, A. L. N. (2019) Bubble dynamics and heat transfer on biphilic surfaces. 16th UK Heat Transfer Conference, The University of Nottingham, 8-10 September, Nottingham, UK.

                                                    Matos, F. M., Liang, Q. J., Pontes, P., Moita, A. S., Moreira, A. L. N. (2019) Time resolved thermographic characterization of heat transfer and fluid dynamics in nanofluid droplets for cooling applications. 29th European Conference on Liquid Atomization and Spray Systems ILASS 2019 Paris, 2-4 September, Paris, France.

                                                    Pontes, P., Cautela, R., Teodori, E., Liu, Y., Moita, A. S., Moreira, A. L. N. (2019) Effect of pattern geometry on bubble dynamics and heat transfer on biphilic surfaces. To be presented at the 14th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics ? HEFAT 2019, 22-24 July, Wicklow, Ireland.

                                                    Moita, A. S., Pontes, P., Matos, F, M., Liang, Q. J., Ribeiro, A. P. C., Moreira, A. L. N. (2019) Time and spatially resolved fluid dynamics and heat transfer characterization of nanofluid droplets impacting on heated surfaces. To be presented at the 1st International Conference on Nanofluids (ICNf) and the 2nd European Symposium on Nanofluids (ESNf), Universitat Jaume I, 26-28 June, Castelló, Spain.

                                                    Moita, A. S., Caldeira, C., Lima, R., Vega, E. J., Moreira, A.L.N. (2019) Development of analogue fluids for cell deformability studies in microfluidic devices. To be presented at the 16th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering and the 4th Conference on Imaging and Visualization ?CMBBE 2019, 14-16 August, New York, USA.

                                                    Teodori, E., Pontes, P., Moita, A.S., Moreira, A.L.N. (2018) On the process of bubble growing and departure on hydrophilic, superhydrophobic and biphilic surfaces. 16th International Heat Transfer Conference - IHTC-16, 10-15 August, Beijing, China.

                                                    Teodori, E., Andredaki, M., Georgoulas, A., Moita, A.S., Moreira, A.L.N., Marengo, M. (2018) Enhanced VOF-based direct numerical simulations of slug flow boiling within micro-channels with smooth and finned heated walls. 16th International Heat Transfer Conference - IHTC-16, 10-15 August, Beijing, China.

                                                    Jacinto, F., Moita, A.S., Moreira, A.L.N. (2018) Droplet dynamics under electrostatic actuation for clinical diagnostics. ICLASS 2018, 14th Triennial International Conference on Liquid Atomization and Spray Systems, Chicago, IL, USA, July 22-26, 2018

                                                    Maly, M., Moita, A.S., Jedelsky, J., Moreira, A.L.N. (2018) Effect of nanoparticles concentration in the characteristics of nanofluid sprays for cooling applications. 19th International Symposium on Applications of Laser and Imaging Techniques to Fluid Mechanics. Lisbon, Portugal, 16-19 July, 2018.

                                                    Harrison, M., Gess, J., Moita, A.S. (2018) A novel boiling heat transfer thermal efficiency parameter for microscale finned heat sinks using two-phase particle image velocimetry. 19th International Symposium on Applications of Laser and Imaging Techniques to Fluid Mechanics. Lisbon, Portugal, 16-19 July, 2018. 

                                                    Andrade, F., Ferreira, F., Moita, A.S., Santos, H. (2018) Transitional flow regime heat transfer and friction factor in smooth tubes. 31st International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy systems ? ECOS 2018, 17-22 June, Guimarães, Portugal.

                                                    Abreu, V., Harrison, M., Gess, J., Moita, A.S. (2018) Two-phase thermosiphon cooling using integrated heat spreaders with copper microstructures. The Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, IEEE ITherm 2018, 29May ? 1 June, San Diego, California, USA.

                                                    Maly, M., Moita, A.S., Jedelsky, J., Ribeiro, A.P.C., Moreira, A.L.N. (2018) Nanofluid sprays for cooling applications. Proc. DIPSI 2018 ? Droplet Impact Phenomena & Spray Investigations Workshop, 18th May, Bergamo Italy, pp. 17-20. ISBN ? 978-88-97413-27-1.

                                                    Jacinto, F., Moita, A.S., Moreira, A.L.N. (2018) Effect of biofluids rheology and wettability on droplet dynamics in lab-on-chip systems for cancer diagnostics. 15th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering and the 3rd Conference on Imaging and Visualization, 26-29 March, Lisbon, Portugal, 1, pp. 88-95.

                                                    Andredaki, M., Georgoulas, A., Miche, N., Teodori, E., Moita, A.S., Moreira, A.L.N., Marengo, M. (2018) Numerical Investigation of oscillating vapour slugs within heated microchannels in saturated flow boiling conditions. 5th European Conference on Microfluidics ? µFlu18, 28 February ? 2 March, Strasbourg, France.

                                                    Jacinto, F., Moita, A.S., Moreira, A.L.N. (2018) Design, test and fabrication of a droplet based microfluidic device for clinical diagnostics. Proceedings of the 11th International Conference on Biomedical Electronics and Devices ? Volume 1: BIODEVICES 2018, 19 ? 21 January, Funchal, Madeira, pp. 88-95. ISBN 978-989-758-277-6.

                                                    Pontes, P., Teodori, E., Moita, A.S., Moreira, A.L.N. (2017) Time resolved thermographic analysis of droplet impacts onto heated surfaces under extreme wetting scenarios. 28th European Conference on Liquid Atomization and Spray Systems ILASS Valencia 2017, 6-8 September, Valência, Spain.ISBN: 978-972-96653-5-6. http://dx.doi.org/10.4995/ILASS2017.2017.5012

                                                    Teodori, E., Pontes, P., Moita, A.S., Moreira, A.L.N., Georgoulas, A., Marengo, M. (2017) Experimental and numerical study on sensible heat transfer at droplet/wall interactions. 28th European Conference on Liquid Atomization and Spray Systems ILASS Valencia 2017, 6-8 September, Valência, Spain. http://dx.doi.org/10.4995/ILASS2017.2017.5024

                                                    Moita, A.S., Maly, M., Moreira, A.L.N. (2017) Nanoengineered wettability for heat transfer enhancement in spray cooling, 1st European Symposium on Nanofluids ? ESNf2017, 8-10 October, Lisbon, Portugal.

                                                    Pontes, P., Teodori, E., Moita, A.S., Moreira, A.L.N. (2017) Thermographic analysis of interfacial heat transfer mechanisms with high temporal resolution. 9th World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics, ExHFT-9, 12-15 June, Iguazu Falls, Brazil.

                                                    Vieira, D. Mata, F., Moita, A.S., Moreira, A.L.N. (2017) Microfluidic Prototype of a Lab-on-Chip Device for Lung Cancer Diagnostics. Proceedings of the 10th International Joint Conference on Biomedical Engineering Systems and Technologies - Volume 1: BIODEVICES, 63-68, 2017, Porto, Portugal, 21-13 February 2017. DOI: 10.5220/0006252700630068, ISBN: 978-989-758-216-5.

                                                    Moita, A.S., Mata F., Kumar, R., Moreira, A.L.N., Cardoso, S., Prazeres, D.M.F. (2017) Fluid dynamics of biodroplets under electrostatic actuation. Proc. of the 7th Portuguese Congress on Biomechanics (CNB2017), Guimarães, Portugal, 10-11 February 2017, ISBN 978-989-20-7304-0.

                                                    Ferreira, Filipe, Santos, Helder, Moreira, António L, Moita, Ana S. (2016) Heat transfer and fluid flow in pipes in the transitional flow regime and high heat fluxes for an automotive heat. Aceite para apresentação oral no 10º Congresso Nacional de Mecânica Experimental ? CNME,  12-14 Outubro, Lisboa, Portugal.

                                                    Mata F., Moita, A.S., Kumar, R., Cardoso, S., Prazeres D.M.F, Moreira, A.L.N. (2016) Effect of surface wettability on the spreading and displacement of biofluid drops in electrowetting. Accepted for presentation at the ILASS ? Europe 2016, 27th Annual Conference on Liquid Atomization and Spray Systems, Sep. 2016, Brighton, UK 4-7 September 2016.

                                                    Roth, N., Reitzle, M., Franke, M., Moita, A. S., Weigand, B. (2016) Shear thinning liquids impacting on dry Solid walls: comparison between numerical simulations and experiments Proc. of ILASS ? Europe 2016, 27th Annual Conference on Liquid Atomization and Spray Systems, Sep. 2016, Brighton, UK 4-7 September 2016. ISBN 978-1-910172-09-4.

                                                    Moura, M., Teodori, E. Moita, A.S., Moreira, A.L.N. (2016) 2 Phase Microprocessor Cooling System with Controlled Pool Boiling of Dielectrics over Micro-and-Nano Structured Integrated Heat Spreaders. Proc of the IEEE ITherm Conference, The Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, May 31 ? June 3, 2016, Las Vegas, NV, USA, pp. 378-387.

                                                    Teodori, E., Palma, T., Valente, T., Moita, A.S., Moreira, A.L.N. (2016) Bubble dynamics and heat transfer for pool boiling on hydrophilic, superhydrophobic and biphilic surfaces. 7th European Thermal-Sciences Conference, Eurotherm 2016, 19-23 June, 2016, Krakow, Poland.

                                                    Moura, M., Teodori, E., Moita, A.S., Moreira, A.L.N., Bai, Y., Li, X., Liu, Y. (2016) Application of bioinspired superhydrophobic surfaces in two-phase heat transfer experiments. 5th International Conference of Bionic Engineering ? ICBE 2016, Ningbo, China, 21-24 June 2016.

                                                    Moita, A.S. (2016) Characterization of bioflows as a clinic diagnostic tool. 5th International Conference of Bionic Engineering ? Invited Session Keynote, 5th International Conference of Bionic Engineering ? ICBE 2016, Ningbo, China, 21-24 June 2016.

                                                    Vieira, D. Moita, A.S., Moreira, A.L.N. (2016) Non-intrusive wettability characterization on complex surfaces using 3D Laser Scanning Confocal Fluorescence Microscopy. 18th International Symposium on Applications of Laser and Imaging Techniques to Fluid Mechanics. Lisbon, Portugal, 04-07 July, 2016.

                                                    Valente, T., Malavasi, I., Teodori, E., Moita, A.S., Marengo, M., Moreira, A.L.N. (2015) Effect of extreme wetting scenarios on pool boiling. Proc. 14th UK Heat Transfer Conference, 8-10 Sept, Edinburgh, UK.

                                                    Valente, T., Teodori, E., Moita, A. S., Moreira, A. L. N. (2015) Effect of wettability on nucleate boiling. Proc. 11th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Kruger National Park, South Africa, 20-23 July, pp. 168-177.

                                                    Moita, A.S. (2014) Thermal and fluid dynamic processes occurring during liquid boiling over micro-and-nano enhanced surfaces. (Invited keynote lecture). 10th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics ? HEFAT 2014, Orlando Florida, USA.

                                                    Moita, A.S. (2014) Heat and mass transfer at interfaces between solid surfaces and non-Newtonian fluids. (Invited keynote lecture). International Heat Transfer Symposium ? IHTS 2014, Beijing, China.

                                                    Ramos, J.A., Moita, A.S., Prazeres D.M.F, Moreira, A.L.N. (2014) Dynamics of droplets of biological fluids over enhanced surfaces with and without electrostatic actuation. 26th Annual Conference on Liquid Atomization and Spray Systems ? ILASS 2014, Bremen, Germany.

                                                    Teodori, E., Moita, A. S., Moreira, A. L. N. (2014) Study of the combined effects of liquid properties and surface micro-patterning on pool boiling heat transfer. 15th International Heat Transfer Conference - IHTC-15, Kyoto, Japan.

                                                    Moita, A.S., Herrmann, D., Moreira A.L.N. (2014) Experimental characterization of the post-impact behavior of non-Newtonian droplets. 17th International Symposium on Laser Techniques Applied to Fluid Mechanics, Lisbon, Portugal.

                                                    Teodori, E., Moita, A.S., Moreira A.L.N. (2014) Empirical correlations between bubble dynamics and heat transfer coefficient for pool boiling over micro-textured surfaces. 17th International Symposium on Laser Techniques Applied to Fluid Mechanics, Lisbon, Portugal.

                                                    Teodori, E., Moita, A.S., Moreira, A. L. N. (2014) Pool boiling heat transfer over micro-treated surfaces: a mechanistic approach. 5th International Conference on Heat Transfer and Fluid Flow in Microscale - HTFFM ? V, Marseille, France.

                                                    Moita, A.S., Hermann, D., Moreira, A. L. N. (2013) Droplet impacts of non-Newtonian fluids for bioengineering applications. 24th Annual Conference on Liquid Atomization and Spray Systems ? ILASS 2013, Chania, Greece.

                                                    Pereira, P., Moita, A.S., Moreira, A.L.N., Monteiro, G.A., Prazeres, D.M.F. (2013) Characterization of the topography and wettability of biomimetic replicas of the surfaces of rose petals and clover leaves. 4th International Conference of Bionic Engineering ? ICBE 2013, Nanjing, China.

                                                    Teodori, E., Moita, A. S., Moreira, A. L. N. (2013) Pool boiling heat transfer over micro-patterned surfaces: experiments and theory. 8th World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics - ExHFT-8, Lisbon, Portugal.

                                                    Malavasi, I., Teodori, E., Moita, A. S., Marengo, M., Moreira, A. L. N. (2013) Pool boiling over enhanced surfaces under a wide range of wettability conditions. 8th World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics - ExHFT-8, Lisbon, Portugal.

                                                    Teodori, E., Moita, A. S., Moreira, A. L. N. (2013) Evaluation of pool boiling heat transfer over micro-structured surfaces by combining high-speed visualization and PIV measurements. PIV 2013, Delft, The Nederlands.

                                                    Moita, A. S., Teodori, E., Moreira, A. L. N. (2012) Effects of surface micro-structuring on the nucleation mechanisms. IV National Conference on Fluid Mechanics, Thermodynamics and Energy - MEFTE 2012.

                                                    Moita, A. S., Moreira, A. L. N. (2012) From single droplet impact to micrometric droplet chains: scaling the effect of surface topography. 12th International Conference on Liquid Atomization and Spray Systems - ICLASS 2012, Heidelberg, Germany.

                                                    Moita, A. S., Teodori, E., Moreira, A. L. N. (2012) Enhancement of pool boiling heat transfer by surface micro-structuring. 6th European Thermal Science Conference, Eurotherm 2012.

                                                    Moita, A. S., Sauer, S. Moreira, A. L. N. (2012) Secondary atomization of micrometric fuel droplets impinging on heated targets. 16th International Symposium on Laser Techniques Applied to Fluid Mechanics, Lisbon, Portugal.

                                                    Moita, A. S., Teodori, E., Moreira, A. L. N. (2012) Pool boiling mechanisms over micro-textured surfaces. 16th International Symposium on Laser Techniques Applied to Fluid Mechanics, Lisbon, Portugal.

                                                    Moita, A. S., Teodori, E., Moreira, A. L. N. Moita, (2011) Influence of surface topography and wettability in the boiling mechanisms. 24th Annual Conference on Liquid Atomization and Spray Systems - ILASS-2011, Estoril, Portugal.

                                                      Tata, M., Moita, A.S., Moreira, A.L.N. (2011) Study of the effect of the topographical length scales on the wettability as strategy to control the interfacial phenomena at droplet-wall interactions. 24th Annual Conference on Liquid Atomization and Spray Systems - ILASS-2011, Estoril, Portugal.

                                                        Moita, A.S., Roth, N., Gomaa, H., Weigand, B., Moreira, A.L.N. (2011) Effect of the properties of the surrounding gas on the dynamic behaviour of bouncing droplets on a solid surface. 24th Annual Conference on Liquid Atomization and Spray Systems - ILASS-2011, Estoril, Portugal.

                                                          Moita, A. S., Moreira, A. L. N., Roisman, Ilia (2010) Heat transfer during drop impact onto a heated surface. Proceedings of the ASME International Heat Transfer Conference - IHTC ? 14, Washington DC, USA.

                                                            Moita, A.S., Moreira, A. L. N. (2010) Assessment of heat transfer measurements at droplet/wall interactions: relation with the impact conditions. 23rd Annual Conference on Liquid Atomization and Spray Systems - ILASS 2010, Brno, Czech Republic.

                                                              Moita, A.S., Roisman, Ilia, Moreira, A.L.N. (2010) Heat transfer mechanisms at droplet/wall interactions: experiments and theory. 23rd Annual Conference on Liquid Atomization and Spray Systems - ILASS 2010, Brno, Czech Republic.

                                                                Moita, A. S., Moreira, A. L. N. (2010) Scaling the effects of surface topography in the secondary atomization resulting from droplet/wall interactions. 15th International Symposium on Applications of Laser Techniques to Fluid Mechanics, Lisbon, Portugal.

                                                                   

                                                                  Attachments