2023/2024 - 2024/2025

Área Especialização - Energia

• Hybridizatiom of a Heavy Tracked Vehicle and Performance Comparison - Vicente José Bento Batista dos Santos Eichler
  
  
• Production and characterization of biochars targeting filtration applications - André Botas Duarte Gonçalves
  
  
• Stability and thermophysical properties of hybrid nanoparticles-fluids systems - Lourenço Tavares Mozzicafreddo
  
  
• High Accuracy Numerical Solutions of the Boltzmann-BGK Equation for Elementary Rarefied Gas Flows - Francisco de Abranches Martins Baeta
  
  
• Transient and stationary experimental study of a two-phase closed thermosyphon with microstructured evaporator surfaces - Miguel Dias Casalinho
  
  
• Technical and economic evaluation of a residential solar power plant with energy storage - João Bernardo Castro Carvalho
  
  
• Waste Generation and Management Model: Complementing Portugal’s Waste Strategy Plan - Francisco Diogo Franco Gouveia
  
  
• The Cost of Uncertainty: How Stochastic Optimization Enhances Modelling of Energy Communities’ Outcomes - Mariana Mira Guedes
  
  
• Analysis of the Contribution of Chemical Recycling to National Municipal Waste Targets: A Portuguese Case Study - Inês Filipa Morais de Sousa
  
  
• Experimental investigation of a novel wave energy floating platform for hybrid wind-wave applications - Nuno Pontes Mendonça
  
  
• Design optimization and thermal analysis of a solar oven - Vasco de Campos Miranda Garcia
  
  
• Development of a BBDB-type buoy with inertia tubes for wave energy conversion - Carolina Maria Homem de Freitas Gonçalves Pereira
  
  
• Development and Characterization of new Hybrid Nanofluids for Convective Heat Transfer Applications - Tiago Soares Mourão Silveira Monjardino
  
  
• Experimental Setup for Aerodynamic Characterization ofHorizontal Axis Wind Turbine Prototypes in a Wind Tunnel - Vasco Farias Alves
  
  
• Development of a Condition-Independent Flow Sensor for pulmonary applications - Miguel Eduardo Cabral Dionísio
  
  
• Use of acoustic actuators and electrodes with modified surfaces for the production of green Hydrogen - João Pedro Parreira e Reis da Silva
  
  
• Development and testing of a thermal management system for unmanned vehicles - Tomás Calapez de Castro e Santos
  
  
• Development of a Schlieren visualization technique – application to the characterization of methane and hydrogen flows - Filipe Pedro Mil-Homens
  
  
• Experimental Investigation of Performances of Conventional and New Nanoparticle-based Fluids in a Mini Flat Plate Solar Collector - André Fraga Branquinho
  
  
• Study of a Background-Oriented Schlieren Setup for Hydrogen Flow Visualization - António Francisco Castro e Almeida Romano Colaço
  
  
• Decarbonization strategies for the Lisbon Airport - Bianca Sabrina Ferreira Victor
  
  
• Study of Instabilities in Industrial Bluff-Body Burners With Flow Rotation - Francisco de Campos Gomes Dinis
  
  
• Numerical Chemiluminescence Study of Hydrogen-Enriched Methane Flat Flames - Débora Ginara Madeira de Almeida
  
  
• High-Order Discontinuous Galerkin Methods for One Dimensional Flows and Optimal Control - Leonor Figueiredo Sopas Barardo Nobre
  
  
• Numerical simulation of a proton exchange membrane fuel cell - Rodrigo Sousa Pereira
  
  
• Experimental study of the effect of modified surfaces on microchannel-based heat exchangers for cooling high-concentration photovoltaic panels - Inês Gomes Dias
  
  
• Hydrogen Blending in Natural Gas Pipelines: Numerical Study of T-Junction Injection with Schlieren-Based Validation - José Pedro Gravilha Ferrão Isabel
  
  
• Numerical Study of Solar-Assisted Torrefaction of Biomass and PVC Using a Parabolic Solar Trough Concentrator - Carlota Manta Luís Serôdio dos Santos
  
  
• Numerical investigation of the influence of operating conditions and geometric dimensions on the performance of a proton exchange membrane fuel cell - Rodrigo Sousa Pereira
  
  
• Waste Generation and Management Model: Complementing Portugal’s Waste Strategy Plan - Francisco Diogo Franco Gouveia
  
  
• Aerodynamic Control of a High-Speed Train Pantograph - Pedro Fernandes Dinis
  
  
• Bomba de Calor para Aquecimento Ambiente associada a um Reservatório de Água Subterrâneo - Cristiano Miguel Nogueira da Silva
  
  
• Simulação e análise de Cortinas de Ar - Modelo CFD de lojas com ligação ao exterior - André Ferreira Ibarra Costa Duarte
  
  
• Energy Analysis of a PEM Fuel Cell:​ Numerical and Experimental Approach​ - Maria Alves Pedrosa
  
  
• Renewable Energy Development for a Designated Land Area - A Hybridization Case Study - Hugo Gouveia das Neves
  
  
• Energy Analysis of a Hydrogen Powered Formula Student Vehicle - Diogo Luís Reis Jacinto
  
  
• Design of a Ring Array Concentrator with Non-Parabollic Rings - Luís Miguel Lima de Almeida
  
  
• Applying Statistical Methods and Machine Learning to the MetaExplorer Platform - Ricardo Cavaco Bernardino
  
  
• Investigação experimental de uma câmara de combustão inovadora para motores aeroespaciais com misturas de gás natural e hidrogénio - Marco Filipe Brito da Silva
  
  
• Evaluating Energy Impacts of Alternative Vehicle Technologies across different Urban Usage Profiles - António Manuel Borges Luciano
  
  
• Amália Tecno-economica do Potencial Fotovoltaico em Autoestradas Portuguesas - Manuel Maria Pais de Vasconcelos de Heredia
  
  
• Model development to assess the embodied carbon of buildings - The NorteShopping case study - Miguel Abreu Martinho
  
  
• Solar Panels Colling Effect Applied to UAVs: An Approach to Improve Energy Performance - Martim Valente da Silva Branco
  
  
• Desenvolvimento e teste de uma instalação experimental para estudar os efeitos da geometria e condições experimentais em escoamento interno - Marcelo João Francisco Feliciano
  
  
• The end-of-life management of photovoltaic modules - Modeling the Portuguese case study for 2040 - Miguel José Martins Rodrigues
  
  
• Assessing Pathways for Resource Decoupling in Europe - Nuno Maria Vicente Carvalhinho
  
  
• Real-time Hemodynamics for Intracranial Aneurysms: Practical and Fast Prediction using CFD-Supervised Deep Neural Networks - Simão Vitoriano Lourenço Nieto de Castro
  
  
• Uncertainty Quantification on the Rate of Fire Spread through a Forest Fuel Bed​​ - Daniel Antonio De Sousa De Abreu
  
  
• CFD analysis of ship resistance in shallow water - Fábio Sabino de Figueiredo
  
  
• Avaliação energética de tecnologias de propulsão alternativas em veículos pesados de mercadorias de longo curso - Miguel Vargas dos Reis
  
  
• Optimization of Wind Farm Operation Towards Lifetime Extension - Miguel Marante Pereira
  
  
• Optimisation of Energy Communities in CEA - Guilherme Filipe Sousa Martins
  
  
• Technologies for ice protection of aircraft air intakes - Tomás Pires Pestana de Vasconcelos
  
  
• A Decision Support and Metaheuristic Model for Optimized Scheduling and Energy Use in Racket Sports Facilities: A Case Study in Operations Research at a Padel Club - Pedro Miguel Padrão Ribeiro da Cunha
  
  
• Study of Simplified Transport Models in Knudsen Heat Pumps - Ana Margarida Pina da Ajuda
  
  
• An Experimental Investigation of the Performance of Nanofluids in Pool Boiling - Rui Miguel Mariano Mira
  
  
• Design of a Combustion Chamber for Liquid Fuels - Leonardo Gonçalves da Silva
  
  
• Design and Investigation of a Novel Gas Turbine Combustor - Afonso Guerra Santoalha
  
  
• Evaluation of low carbon mobility scenarios at municipal scale in Portugal - Edgar Pereira Bernardo
  
  
• Concept of a Superconducting Induction Motor Using BSCCO 1G tapes Forming its Squirrel-Cage - João Afonso de Barros Ruival Fidalgo Fonseca
  
  
• Techno-economic analysis of the implementation of PV systems in highways - Mariana Ribeiro Correia
  
  
• Estratégias para a Redução do Consumo de Energia em Habitações: Impacto de Tarifas, Painéis Solares e Sistemas de Armazenamento - Frederico Pavão Sousa
  
  
• Combining UBEM tools with funding instruments to enhance building retrofit and renewable energy systems implementation - Beatriz Pereira Veríssimo
  
  
• Implementation of a sliding interface technique for second and high order finite volume - José Pedro de Carvalho Molarinho Monraia Ralo
  
  
• Design, testing and analysis of a N2O/paraffin wax hybrid rocket combustion system for low-cost propulsion applications - João Miguel Firmino Moreira
  
  
• Development of Computed Axial Tomography Techniques to evaluate mixing processes between Natural Gas and H2 - Pedro Afonso Dos Santos Marques
  
  
• Reffiting of a low-swirl burner for a fuel blend of methane and hydrogen for ceramic industry applications - Diogo Lopes Diz Santa Rita
  
  
• Study on the Behaviour of H2 Gas Mixtures in Throttling Processes - Joule-Thomson Effect - David Coelho Fróis Silva
  
  
• The Influence of Uncertainty Factors in Modeling the Smoke Plume Rise in the Surface Atmospheric Layer - Ricardo Daniel Cardona de Sousa Bento
  
  

Área Especialização - Produção

• Injection Forging of Thin-Walled Tubes - Manuel Filipe Vieira Ferreira
  
  
• Hybridization of Wire-Arc Additive Manufacturing and Single Point Incremental Forming for Flexible Part Production - João Miranda Medeiros
  
  
• Computational progressive damage model to predict entropy generated during fatigue of composite materials - Diogo Ribeiro dos Santos Ponces Camanho
  
  
• Feasibility analysis on the Manufacturing of conformal cooling channels through Direct Energy Deposition- Wire Arc (DED-Arc) - Tiago Sequeira Lince Núncio
  
  
• Hybrid Friction Stir Joining/Channeling of Dissimilar Metal-polymer Joints - Cristina Andreia da Silva Penas
  
  
• Development and Validation of Ultrasonic Fatigue Testing Machine for Three Point Bending with Pre-Load - Marco Túlio Soares Coutinho
  
  
• Design of a Rail Track Irregularities Measurement System for Non-inspection Vehicles - João Pedro Pereira Torres
  
  
• Rescheduling and Stop-skipping Strategies in Urban Mobility Systems - Rodrigo Soares Marramaque
  
  
• Predictive Maintenance in a Bike Sharing System using User-centric Information - João Couto Mendonça
  
  
• Design and Prototyping of a Morphing Wingtip for UAV Applications Using AM Technologies - João Daniel Catita Porém Machado
  
  
• Development of a nonlinear torsional spring for exoskeleton actuation - Maria Rui Vala Fonseca
  
  
• Desenvolvimento de Máquina para Monda Térmica de Plantas Infestantes - Nelson Miguel Lopes Mendes
  
  
• Design and Development of a Personalised Ankle-Foot Orthosis Incorporating Carbon Fibre Reinforced Polymer and Additive Manufacturing - Rúben Filipe dos Santos Alves
  
  
• Integrated CAD, CAE, and PDM methodologies in the project of a competition vehicle - Hugo Martins Seco Rodrigues
  
  
• Robusta: Desenvolvimento de um Isolador de Vibrações para Impressoras 3D em plataformas móveis - Pedro Manuel Teixeira Rodrigues
  
  
• Design and Prototyping of a Concrete 3D Printer with Multiple Independent Tool-Heads - João Paulo Baptista da Ajuda
  
  
• Sheet injection using tailored heat-treated blanks as semi-finished products - Miguel Moisés Lopes Jesus
  
  
• Characterization of thin-walled HFIW tubes - Pedro Renato Viana da Cruz
  
  
• Planning Competitive Transportation Networks as HSR is Introduced - João Pedro Rosário de Jesus
  
  
• Fabrico aditivo por extrusão de filamento metálico: Parâmetros de impressão e propriedades mecânicas - Bernardo Miguel Teixeira de Sousa
  
  
• Numerical Study of Fatigue Crack Propagation using Neural Networks - Tomás Marques Leal
  
  
• Analysis of Shoulder Complex Movement in Breaststroke While Comparing Two Different Breathing Strategies - Teresa Isabel da Cruz Granjeia
  
  
• Design of a Small Scale H-Darrieus Vertical Axis Wind Turbine - Vitor Manuel Ribeiro Gonçalves
  
  
• Design and Analysis of a 3U CubeSat Structure Produced via Material Extrusion - Henrique Tavares Bernardo Gomes da Silva
  
  
• Development of a Track Settlement Methodology for Predicting Cyclic Top Growth - Miguel Alexandre Gomes Marques
  
  
• Aplicação das metodologias FMECA e RCM a vagões de transporte de mercadorias - João Pedro Moreirinhas Pinto
  
  
• Additive manufacturing of zirconia ceramics by FFF - Miguel Afonso Câmara Farinha
  
  
• Lean Manufacturing Applied to Prototyping: a Case Study on a Formula Student Monocoque - Margarida Herdeiro Sequeira Cavaco Cardoso
  
  
• New sheet formability test to characterize mixed mode II and III of fracture mechanics - Mariana Marques Pires
  
  
• Switchover Frequency Maintenance Program Enhancement for Centrifugal Pump Systems : Case Study at Galp's Refinery - Mário Afonso Gouveia Certo Simões
  
  
• Design e Fabrico de Ligações Sobrepostas Híbridas, através das Tecnologias de Rebitagem Double Flush e Adhesive Bonding - Rita Maria Duarte
  
  
• Impacto do Envelhecimento do Alumínio num Processo de Estampagem - Margarida Pires Teixeira
  
  
• Design of a carbon fiber composite tubular frame for a Motostudent electric prototype - Alexandre Alonso Durão Lopes
  
  
• Forming Limits of Thin-Walled Tubes - Martim Rodrigues Sérgio
  
  
• Máquina de Colheita em Contínuo de Azeitona - Diogo Gomes de Oliveira
  
  
• Mechanical behavior of dissimilar friction stir lap welded joints under different loading and temperature conditions - Rodrigo José Coelho
  
  
• Macro-structured Deep Drawing Tool Design - João Pedro Coelho Cunha
  
  
• Formability limits of thin-walled structures with special cross-sections - Inês Matias Almeida
  
  
• Experimental analysis of cutting forces using ball-end mills towards a mechanistic model - João Maria Cordeiro de Sousa Ruela e Silva
  
  
• GREEN COMPOSITES FROM WOOD WASTES AND BIOPOLYESTER: Preparation, Characterization and Life Cycle Assessment - Leonor Aragão Baeta Martins
  
  
• Design of bicycle-sized non-pneumatic tires produced by fused filament fabrication - Pedro Miguel Silva Tomé
  
  
• High to Very High Cycle Fatigue behaviour of two Al alloys additive manufactured through WAAM - Dinis Santos Sequeira
  
  
• Possibilities for the use of Additive Manufacturing in the procurement of military parts - Rita Vinais Ribeiro de Figueiredo Narra
  
  
• Impact of Printing Parameters on Airtightness in Fused Filament Fabricated Hollow TPU Specimen - Francisco Corrêa Henriques da Cunha e Carmo
  
  
• Concept generation and sustainability assessment of a non-pneumatic tire produced with fused filament fabrication - Tomás Rodrigues dos Reis
  
  
• Development and characterization of a stone powder and cellulose acetate tow material via gelcasting with acetone - Bruno Miguel Marinho Pereira Marques Moura
  
  
• The impact of AI Tools on the execution of common activities in the Industry Sector - A Case Study - António Pedro Oliveira Loureiro Nascimento Faria
  
  
• Integração de soldadura por resistência no fabrico aditivo híbrido por arco elétrico - Rita Barros
  
  
• A new methodology to fabricate metal-polymer parts through additive manufacturing - Sofia Flores da Silva
  
  
• Scheduling and Synchronisation in Urban Mobility Hubs - João Luís Silva Galvão
  
  
• Development and Optimization of Metal to Polymer Friction Stir Welded Joints - Beatriz Margarida Gaspar Ribeiro
  
  
• Comparative Life Cycle Assessment and Life Cycle Costing of Battery Electric and Diesel Buses - Mariana Ramos de Almeida
  
  
• Numerical Simulation of a Ballistic Impact at High Speed - Afonso Morais Rainha
  
  
• Caracterização de Provetes em Ligas Inovadoras de Alumínio Obtidas por AM - Miguel Salvado de Morais
  
  
• Development of Additively Manufactured Cellular Structures for Elastomeric Non-Pneumatic Tyres - Joana Beatriz Pereira Pinto
  
  
• High Density Accumulator Design for an Electric Vehicle - Diana Marques Sanchez
  
  
• Projeto e Fabrico de Veículo para Transporte de Ferramentas Agrícolas - José Hugo Rodrigues Vieira
  
  

Área Especialização - Sistemas

• Admittance Control of the UR3e Robot Manipulator - Samuel Teixeira Vaz
  
  
• Optimization of Autonomous Mobile Robot Routes for Intralogistics - Rodrigo Nuno Quintano Freire
  
  
• Application of Data Analysis and Machine Learning in a Lean Six Sigma Project - Carolina Azinheiro Guerra
  
  
• Optimization of Autonomous Mobile Robot Routes for Intralogistics - Rodrigo Nuno Quintano Freire
  
  
• Validation of an Inverse Kinematics Solution for a Soft Continuum Manipulator Under the Constant Curvature Assumption - Ana Rita Cabral Otero
  
  
• Path to Digital Twin of Public Surface Mobility: A Case Study in Lisbon - João Pedro Mendes Rosado
  
  
• Integração de um Motor Elétrico para um Exoesqueleto de Tornozelo - Maria Beatriz Fiúza Martins Boavida dos Santos
  
  
• Estudo da Impedância Tridimensional do Braço Humano utilizando o KUKA Lightweight Robot 4+ - Francisco Henriques Marques
  
  
• Design and Development of a Small-Scale All-Terrain Ground Vehicle for Autonomous Operation - Miguel Pereira Francisco Pinho
  
  
• UAV navigation with space constrains - UAV Stability Study - Ines Isabel da Pena Santos
  
  
• Comparing Different Approaches for the Perception of an Autonomous Formula Student Car - Miguel Heitor Valverde
  
  
• Perception System for a Vineyard Environment - Guilherme Silva Rodrigues
  
  
• Predicting cardiomyocytes content using data-driven approaches - Maria do Carmo Barroso Raimundo Lopes Ribeiro
  
  
• Implementation of accurate dynamics interaction in industrial robots - Gonçalo Rodrigo Alves dos Santos
  
  
• New Fast Split Algorithm for Capacitated Arc Routing Problems - Pedro Dias
  
  
• Design and Control of a High-Power LED End-Effector for Robotic Weed Management - João Filipe Simões Gariso
  
  
• Knowledge distillation from deep neural networks into neuro-fuzzy systems: a universal framework - Alexandre Maria Nogueira Gonçalves
  
  
• Desenvolvimento de uma plataforma robótica com arquitetura pendular - Hugo Francisco Santos Ramos
  
  
• A Performance Evaluation Tool for Bird Tracking Algorithms from Avian Radar Images - Vasco Dias Mendonça Machado da Luz
  
  
• Leveraging Parkinson’s Disease patient’s lower back accelerations to classify Freezing of Gait events - Humberto Francisco Antunes dos Santos
  
  
• Electrical stimulation parameters influence on muscle activity inhibition: experimental study - Ana Rita Antunes de Campos
  
  
• Patient-specific Real-Time Architecture for ECG Classification - André Filipe Brás Lopes
  
  
• A Simulation-Based Approach to the Public Transportation Network in Lisbon - Mateus Bandeira Pinto Lopes Ribeiro
  
  
• Shaping Ankle Mechanical Impedance in NeurologicaL Disorders - Sebastião Garcia Louro do Nascimento e Oliveira
  
  
• A Neuronavigation System for Brain Surgery Using the LBR Med - Álvaro Coiteiro Lopes
  
  
• Leveraging Graph Neural Networks with Transfer Learning for Solving the Vehicle Routing Problem - Simão Pedro Cunha Godinho Fernandes
  
  
• Fractional control of steering wheel DC Motor - Duarte Sequeira Correia
  
  
• Improving the kinematic accuracy of a soft continuum manipulator using Machine Learning models - André Mahomed Pimentel Raposo
  
  
• Design of an Adaptive Controller for Power Maximization in Partial Load Region - Maria Joana de Sousa Machado Pires Urbano
  
  
• GPS-Aided AHRS for a driverless car using an Extended Information Filter - Pedro Filipe Rocha Nascimento Barreiros
  
  
• Dynamic Route Optimization for Express Delivery Services - João Francisco Vieira Moura
  
  
• Vision-tactile object recognition with machine learning in a soft-gripper - Filipe Almeida Alves Monteiro
  
  
• Classification of pathological and normal voices using machine learning - Marta Oliveira Sousa
  
  
• Robust Funnel Synthesis Algorithms for the 6-DOF Powered Descent Guidance Problem - Guilherme João Verdasca Videira
  
  
• Automation of data processing on street parking rotation analysis using YOLOv8 - Santiago Tapp Barroso de Líbano Monteiro
  
  
• Automatic System for Fruit Detection and Harvesting in Real-Time - Vasco Gonçalves May Pereira da Cruz
  
  
• Dynamical Primitive Learning with explicit contact modeling - Filipe André Gomes de Sousa Varela
  
  
• Sliding mode traction control for an autonomous agricultural vehicle with in-wheel motors - Miguel André Milhazes
  
  
• Development of a Model on a Robotic Platform for Real-Time Plant Detection Using NDVI - Diogo Fernando Ramalho Vilela
  
  
• Design and testing of low-cost upper limb rehabilitation exoskeleton - João Pedro Afonso Alves
  
  
• From Visible to Infrared: Improving Deployment Adaptation of an Aircraft Detection Model Using Synthetic Infrared Imagery - Diogo Filipe Guerreiro Graça Nabais Valente
  
  
• Navigation of an Autonomous Pendular Vehicle and Its Application to Precision Agriculture - Tiago Estêvão Oliveira Gomes

2022/2023

Área Especialização - Energia

• Shape optimization of bi-dimensional airfoils using a mixed element formulation and deep learning - Rodrigo José Ricardo Correia
  
  
• Fuel-flexible hydrogen burner for industrial furnace systems - Margarida Sofia Lourenço Lorena
  
  
• Mooring system for semi-submersible wind turbine platform WindFloat (R): State of the art and Design innovative investigation - Rafael de Oliveira Rodrigues
  
  
• Design and development of an interface for historical energy data - Rodrigo Miguel Faísca Guedes
  
  
• Estudo das condições críticas de ocorrência de ebulição em permutadores de calor para automóveis - Filipe Garcia Alves
  
  
• The evolution of material production from 1800 onwards: Technology evolution, efficiency and environmental impact. Insights for future demand - Aurora da Silva Carvalho
  
  
• Quantifying potential Carbon off-setting in urban areas: Lisbon’s neighbourhood case study - Miguel Filipe Parreira Eugénio
  
  
• Assessing alternative scenarios for reducing transport poverty at the urban scale: a case study in Lisbon - Francisco Coelho Plácido
  
  
• Projecto de um deflector de jacto aeronáutico - Miguel José Faroleira Demétrio
  
  
• Alkaline Water Electrolysis: Ultrasonic Presence and Hydrogen Bubble Formation - Filipe Guarda Araújo
  
  
• MPSD - Marine propulsion system design applied to Técnico Solar Boat prototype - Robin Rauterberg Tomaz
  
  
• Evaluation of syngas production from thermal gasification of residual biomass- experimental and modelling - Joana Cristina Letra
  
  
• Análise ao Embodied Carbon de um bairro em Lisboa - Francisco Patrício Mota Silva Teves
  
  
• Deployment of Energy Communities Exploring energy sharing strategies and financing mechanisms - Gonçalo Bastos da Silva e Costa
  
  
• Retrofit a SOCATA TB Light Aircraft with Electrical Propulsion: Electric Powertrain and Hybrid-Supercapacitor Technologies Selection - André Miguel Louro Serra
  
  
• Assessing the reliability of the Dutch power system in 2050 - Francisco de Araújo Martins Ferreira Reis
  
  
• Urban energy modeling for comparing differentintervention scenarios in both economic andtechnical terms - Rodrigo Costa Pavão
  
  
• Strategies for a Circular Economy in the Textile Industry in Europe and Portugal: a Critical Assessment - João Ricardo Veloso dos Santos
  
  
• Experimental investigation on pyrolysis of agricultural biomass residues - Rita Santos Saraiva de Sá Magalhães
  
  
• Calibração de Modelos Energéticos de Edifícios - Rodrigues Pascoal Castro
  
  
• Heat transfer performance of hybrid nanofluids in a mini-heat exchanger - Filipa Ferreira de Almeida
  
  
• Hybrid manufacturing of bi-material commemorative coins - Pedro Manuel dos Santos Rosado
  
  
• Experimental Assessment of Friction in Orthogonal Cutting - Maria Sofia Duarte Leite Pinto dos Santos
  
  
• Half-lap butt joints by double-sided self-pierce riveting - Frederico António Nunes Martins
  
  
• Development and mechanical design of a platform to support the surveillance of aquaculture production - Manuel Filipe Garcia dos Santos Ferreira
  
  
• Simulation and Analysis of the Foot-Ground Interaction using a MSD-FEM Co-simulation Approach - Francisco Aires Martins Guedes de Melo
  
  
• Characterization of alternative nanofuels for aviation - Maria Alice Santos Oliveira Martins
  
  
• Thermal Analysis of Railway Disc Brakes - Ana Margarida Galhardo Meirinhos Mota Gaspar
  
  
• Evaluation of the use of Nanofluids in a Microchannel Based Cooler to be Integrated into a Concentrated Photovoltaic Panel - Rodrigo Gonçalves Solipa
  
  
• Cogeneration for Green Hydrogen Production: Thermodynamic Analysis and Optimization - Gonçalo Dinis Duarte Berbereia Rafael
  
  
• Pré-dimensionamento de uma Ground Run-Up Enclosure - Igor Alexandre Pires Guerra
  
  
• Numerical validation of an open flame, swirl-stabilized, pure Hydrogen burner - Tomás Aleixo Barreto
  
  
• Quantificação do impacto energético e ambiental de operações de gestão de resíduos em ambiente urbano - Edson Mauro Cupertino daConceição
  
  
• Biochar production and characterization to assess its water retention capabilities in the soil - Diogo Pereira Pires
  
  
• Fuel-flexible hydrogen burner for industrial furnace systems - Margarida Sofia Lourenço Lorena
  
  
• Desenvolvimento de sistema de monitorização de energia e gestão técnica centralizado no sector do retalho alimentar - Qiu Jian Liang
  
  
• Model-assisted design of a hydrogen burner at industrial scale - Diogo Paulo Melo da Costa Silva Amaral
  
  
• Using real consumer data for the modeling of Energy Communities: Comparative scenario analysis in rural, industrial, and urban locations - Manuel Correia Teixeira Bonito
  
  
• Forced Response Numerical Investigation of a Transonic Compressor Rotor - Mariana Pires Gonçalves Toco Dias
  
  
• Comparison of urban building energy simulation tools considering a real case study - Maria Santos Amorim
  
  
• Development of a Tool to Optimize Equipment Selection for Dwellings - Bruna Cristina Lopes Pereira
  
  
• Development and experimental characterisation of a low flux solar simulator for PV testing applications - Guilherme Costa Simes
  
  
• Aerodynamic Tests of a Concept Train - Beatriz Baltazar Pereira Isidro
  
  
• Assessing Decarbonization Scenarios using Municipal Residential - Mariana Rodrigues Januário
  
  
• Design of a Net-Zero Energy Building - Vasco Frada Reis Vieira
  
  
• Análise Termoeconómica e Otimização de um Sistema de Energia Híbrido combinado com um Ciclo Transcrítico de CO₂ para a Produção de Hidrogénio, Oxigénio e Eletricidade - Mário Filipe Bexiga Monteiro
  
  
• Green Hydrogen production storage system in remote areas - Luís Henrique Silva Rodrigues Chaves
  
  
• Study of the energy mix for the Alentejo region - Tiago Miguel Silva Sousa
  
  
• Failure Mode Analysis and Detection Methods in Photovoltaic Systems: Implications for O&M Strategies and Economic Viability - Martim Valdez Botelho Duarte Ferreira
  
  
• A hybrid renewable autonomous energy system associated to a heat pump for a greenhouse heating and electricity and green hydrogen production: technical and economical analyses and optimization - João Bernardo Pereira Marques
  
  
• Shape optimization of bi-dimensional airfoils using a mixed element formulation and deep learning - Rodrigo José Ricardo Correia
  
  

Área Especialização - Produção

• Hybrid manufacturing of bi-material commemorative coins - Pedro Manuel dos Santos Rosado
  
  
• Innovative design strategies for PBF-LB/M heat pipes - Bruno Miguel Mira Pinto
  
  
• Implementação de metodologias Kaizen-Lean e aferição do estado de maturidade digital de unidades fabris na Indústria Alimentar - Tiago André Ferreira
  
  
• Desenvolvimento de Modelos Numéricos para Estimar Respostas Acústicas e Vibro-Acústicas Utilizando Transmissibilidade e Sensores Remotos - João Tomás Teixeira Nunes
  
  
• Implementação de metodologias Kaizen-Lean na redução de reclamações no setor bancário - Rui Pereira Ventura
  
  
• Ligação Mecânica de Chapas de Topo - Indentação e Injeção - António Carvalho Vacas Silva Ribeiro
  
  
• Injection Lap Riveting: Economic Analysis and Multi-planar Busbars - Miguel Santiago Teixeira Sapage
  
  
• Ligação de Chapas Topo-a-Topo por Encaixe Mecânico Sem Adição de Elementos Auxiliares - Fernão Maria Ribeiro de Andrade Favila Vieira
  
  
• Simulation and Analysis of the Foot-Ground Interaction using a MSD-FEM Co-simulation Approach - Francisco Aires Martins Guedes de Melo
  
  
• Analysis of Tubular Self-Piercing Riveting on Dissimilar Butt Joints - Tomás Lagoas Pohle
  
  
• Tubular Self-Piercing Riveting Applied to Butt Joints - Leonardo Lúcio de Melo Sabino
  
  
• Modelling and Characterization of Novel Honeycomb Structures with Mass Gradient Produced by Additive Manufacturing Technologies - Luís Aser Castillo Portela
  
  
• Compressive and tensile behaviour of fused filament fabricated thermoplastic elastomers - Luís Henrique de Gusmão Diogo Costa Ferreira
  
  
• Mechanical design for satellite quantum communication - Luís Pedro Ramalho Barbosa
  
  
• Micromaquinagem por Eletroerosão em Alumínio: Mono-descarga e Morfologia da Cratera - Miguel Pedro dos Santos Agrela
  
  
• Failure of FRP Bolted Connections: Dependence on Fibre Orientation and Reliability Study - Tiago Andrade e Sousa Rodrigues da Silva
  
  
• Risk Assessment of Signals Passed at Danger - A Railway Safety Analysis of the Portuguese Railways - Miguel José Igreja Grilo
  
  
• Human Factors in Railway Safety Management - Gonçalo Fernandes Neves
  
  
• Dynamic Analysis of the Rotating Front End of ESO's MOONS Instrument - Ivo José Gonçalves
  
  
• Simulation of Performance Improvements and Turbocharger Optimization for Large Gas Engines - Gustavo Nunes Laureano
  
  
• Gestão de Projetos Especiais - Um caso de estudo - Adérito dos Anjos Pereira
  
  
• Automatic Train Protection system in Railway Safety Management – Assessing the reliability of ATP in Signals Passed at Danger - Guilherme Filipe Bonifácio Ribeiro
  
  
• Variability of the Mechanical Properties of GFRP Materials Produced by Vacuum Infusion: GFRP Plate - Simão Osório do Amaral Aparício Lopes
  
  
• Determination of the Wrinkling Limit Curve in Sheet Metal - João André Oliveira Santos
  
  
• Experimental and Numerical Modal Analysis of a Composite B-Pillar - Eduardo João Mesquita Marques
  
  
• Thin-Walled Wire Arc Additive Manufacturing Parts for Metal Construction - João Sousa Neves Maia
  
  
• Desenvolvimento de Modelos Computacionais para Acidentes Rodoviários Ocorridos a Alta Velocidade - Sofia Isabel Inácio Freitas Santos
  
  
• New Hidden Self Clinching Fasteners for the Fabrication of Electric Conductive Hybrid Busbar Joints - Ricardo Gomes Clara
  
  
• Estudo do Comportamento Hiperelástico de Estruturas de TPU Fabricadas por Impressão 3D (FDM) - Pedro Miguel Pasadas Pires
  
  
• Modelling and Analysis of a Portuguese Material Recovery Facility: Investigating the Relationship between Material Recovery and Separation Parameters - Sara Maria Medeiros Amaral
  
  
• Utilização de fabrico aditivo na obtenção de componentes de ligação para aplicações de eletromobilidade - Nuno Miguel Silva Pereira
  
  
• Design and development of an innovative positive displacement pump concept - Leonardo de Ferreira Agostinho
  
  
• Simulation and Mechanical Characterization of Graphyne and Graphdiyne Nanotubes using Atomistic Finite Elements - Afonso Estrela Soares Ferreira
  
  
• Development of a mechanical system for automatic synchronization of high resolution images from large flat products in linear vision systems - João Miguel Martins Teixeira
  
  
• Structural analyses of different configurations for the MobyFly-10m boat composite forward struts - Maria João Robalo Portijo e Silva
  
  
• Mechanical design of a composite automotive wheel in bending - Pedro Revez Colaço Mendonça
  
  

Área Especialização - Sistemas

• Data-Driven System to Assist the Root Cause Analysis Phase of Continuous Improvement Projects - Hugo Miguel da Mota Botelho
  
  
• 3D ultrasound for prostate focal interventions - Francisco Melo Barreto Heitor
  
  
• Incremental control of a Tail-sitter UAV - Pedro Mendes da Silva Réquio
  
  
• Real-time foot strike prediction from wearable sensors in Locomotion - Bruno Akira Oshiro
  
  
• Knowledge Distillation Applied to Customer Sentiment Recognition - Rodrigo Cavaco Gonçalves Cardoso de Lemos
  
  
• Detection and Tracking of Flying Birds in Avian Radar Images - João Rafael Alves Sá de Almeida
  
  
• Ankle Impedance Prediction during Heel Strike using Neural Networks - Diogo Filipe Braz Rijo
  
  
• Identification of Flying Objects Using Computer Vision - Duarte Maria Perestrello Leite Vilardebó Loureiro
  
  
• Musical Choreography with a Team of Omni-directional Mobile Robots - Manuel Maria Sanina do Espirito Santo e Silva
  
  
• Cálculo de Volume de Objectos através de Imagens de uma Câmera RGBD - Giovanna Mazzali Albarello
  
  
• Space Debris Survey Algorithms - Pedro Matos Raimundo Duarte
  
  
• Intelligent Anomaly Detection for Customs Inpections Based on Computer Vision - João Maria da Câmara Leme de Brito Barbosa
  
  
• Automatization processes to characterize marine mammal communities through aerial imagery - João Miguel Garcia Beato de Oliveira Canelas
  
  
• ML-Based visual assessment of biomass in aquaculture cages - Dinis Domingues Pedro
  
  
• Developing and Integration of Object Detector Fully Trained on Synthetic Data for Augmented Reality in SATCOM Assembly, Integration and Testing - Rafael Morais Saraiva
  
  
• Ultrasound-registration robot-assisted brain surgery - Manuel Lourenço Alves de Carvalho
  
  
• People Detection and Classification from Multi-Modal Sensors for Military Purposes - João Pedro dos Santos Matos
  
  
• Comparative study of automotive tyre/ground dynamic models - Paulo Guilherme Spínola Gouveia
  
  
• Developing automation in image processing of marine fish - Leonardo Viegas Filipe
  
  
• Information Fusion Applied to Intelligent Customer Care - Mónica dos Santos Martins
  
  
• Power Dispatcher for Wind Power Plant - Mariana Preto Nunes
  
  
• A Machine Learning approach for understanding the role of Energy in Economic Growth - Maria Freire Braz da Silva
  
  
• Regression-based models for anomaly detection on Wind Turbine components - Rafael de Oliveira Ferreira Vilar Santos
  
  
• Many-Objective Optimization for Production Planning Under Uncertainty - Francisco Silva Marques Tavares Farinha
  
  
• Regression-based models for anomaly detection on Wind Turbine components: With a multi-model approach study - Rafael de Oliveira Ferreira Vilar Santos
  
  
• Trajectory Planning of a Weather Balloon with Altitude Control Subject to Wind Disturbances - Ana Catarina Rita Rodrigues
  
  
• Modelo do ciclo de renovação óssea regulado pela hormona paratiroideia e pelo esforço físico - Rita Isabel Reis Gomes
  
  
• Recognition of Portuguese Traffic Signs in Unfavorable Conditions using Convolutional Neural Networks - Daniel Rocha Vareta
  
  
• On The Possibilities of Fractional Differential Modeling of A Cancer Model - Lourenço Côrte Vieira
  
  
• Portugal Electricity Price Forecast using Machine Learning and Sentiment Analysis - César David Mocinha Pereira
  
  
• Modelling and analysis of a soft continuous robot with friction effects - Diogo Miguel Dias Pereira
  
  
• Melanoma Diagnosis: A Dual Approach using Residual Neural Network and Feature Extraction - Francisco Luis Reis Pires
  
  
• Wildfire Burnt Areas Classification from Aerial Imagery - Tomás Costa Simes
  
  
• Fraud Detection Using Transformed Graph Data on Deep Learning Models - Manuel José da Silva Rodrigues
  
  
• Control of an Oscillating Water Column using Nonlinear Model Predictive Control - Miguel Santos Loureiro
  
  
• Previsão de condições de fragilidade num estudo de coorte português - Alexandre José Antunes Freira
  
  
• Control of an Oscillating Water Column using Nonlinear Model Predictive Control - Miguel Santos Loureiro
  
  
• A Machine Learning approach for understanding the role of Energy in Economic Growth - Maria Freire Braz da Silva
  
  
• Simulation Framework for a class of cable-driven non-rigid Manipulators - João Joaquim Borralho Gil
  
  

2021/2022

Área Especialização - Sistemas

• A Deep Reinforcement Learning Approach for Ultrasound Probe Orientation - André Bento Simões
  
  
• Flying Wing Ground Target Tracking Using Visual Servoing and Gimbal Control - António Pedro Peres Ruivo de Matos Nunes
  
  
• Pose Estimation of a soft continuum manipulator using magnetic linear encoders - Carlos Fernando Raposo da Costa
  
  
• Development of algorithms for assessing biomass and quality of sown biodiverse pastures using unmanned aerial vehicle - Carolina da Silva Montez
  
  
• Experimental Validation of Fractional Control Of a Wind Generator - Geraldo Rafael Rodrigues
  
  
• Georeferencing Aerial Imagery - Guilherme de Melo Antunes
  
  
• Fractional Reset Controllers - Henrique Horta Soares Freire da Paz
  
  
• Mechanical Simulation Environment for a Cable Driven Underwater Manipulator Robot - Inês Catarina Cardoso Nobre
  
  
• Predictive Maintenance of Bike Sharing Systems using Neural Networks - Luís Pereira de Brito Líbano Monteiro
  
  
• Fractional models of drug resistance in bone tumour treatment - Maria Catarina Bettencourt Fernandez
  
  
• 5S methodology enhancement through the use of Industry 4.0 solutions - Marta de Brito Batalha
  
  
• Proprioceptive sensing for a continuum manipulator robot - Micael Melo Coelho
  
  
• Automatic analysis and identification of traffic sign failure on Portuguese roads - Miguel António Santiago
  
  
• Surrogate model of a rotary kiln and of a microwave heating process using neural networks - Pedro Cardoso de Menezes de Moser
  
  
• Heart Failure Exacerbations - Raquel Gomes Clemente da Silva
  
  
• Automated Plastic Detection with Artificial Intelligence - Ricardo Miguel Dourado dos Santos Guedes
  
  
• Optimization of the sepsis treatment in the ICU using Reinforcement Learning - Sofia Gonçalves Carreira
  
  
• Novel Data Based Model to Predict Cement Compressive Strength - Vasco Alexandre Antunes Machado
  
  

Área Especialização - Produção

• Numerical modelling of the fatigue crack behaviour on AA6082-T6 MT specimens - Carlos Miguel Correia Esteves
  
  
• Design and Manufacture of a Semi-Passive Ankle Exoskeleton for Locomotion Support - Alberto Canêlhas Gonzalo
  
  
• Fabrico aditivo de pastas cerâmicas: influência de parâmetros de impressão nas propriedades mecânicas - João Domingos Moreira Almeida Oliveira
  
  
• Tryout of a wrist and hand exoskeleton for children in rehabilitation - Beatriz Borges Fernandino
  
  
• RAMI of the ITER CTS and Effects of Maintenance Plans on a System's Availability - João Pedro Trinindad da Silva
  
  
• Development of a Reactive Suspension For Vehicles - David M iguel dos Santos Vigarinho
  
  
• Caracterização do comportamento à compressão de PLA e PC fabricados por filamento fundido - João Pedro de Matos Dupont
  
  
• Risk Analysis and Maintenance in Nuclear Facilities HyRMan Risk Analysis - André Duarte Alvito dos Santos Luís
  
  
• Concept and development of a size adjustable and stand up wheelchair for children with spina bifida - Pedro Miguel Relógio Belo Matos Ribeiro
  
  

Área Especialização - Energia

Comprehensive Verification and Validation of a Wave Energy Converter CFD Analysis - Tiago Costa Clérigo Peixoto do Amaral

Design of a Small-scale Double Auger Pyrolysis Reactor - João Lobo Navarro Gonçalves

Estratégias para reabilitação de um edifício visando um balanço energético nulo - Pedro Manuel Machado Venceslau

Simulation of IST’s data center cooling system using Simulink - Diogo Soveral Martins

Design of a photovoltaic solar installation for the irrigation of the Vallada cultivation area (Valencia) - Víctor Felip Plaza

Modelação da transpiração térmica em compressores de Knudsen - Vitor Pimentel Aguiar

Simulation of 3D wall jet cooling of a glass plate oven partition - Rodrigo de Jesus Freire Neno

Effect of inorganics on wheat straw termal decomposition behaviour - José Miguel da Vinha Pereira Penedos

Design of Hydrofoils for Marine Current Turbines: a study considering Hydrodynamic and Structural Performance - João Guilherme dos Reis Gomes

Numerical characterization and flow optimization and heat transfer inside corrugated tubes - Milton Mateush

Thermal Balance Test and Thermal Model Correlation of ISTSat-1 - Stefan Sochirca

Estudo da propulsão de um veículo ferroviário de alta-velocidade - Viriato Manuel Rodrigues Santos Ribeiro

Study of a Jet Engine Test Facility - Marta Góis Chilão Cordeiro da Rocha

2020/2021

Área Especialização - Sistemas

• Modeling Framework for Robotic Locomotion Systems - Afonso Moreira Valador
  
  
• Fusão de angiografias com imagens TAC e RM para segmentação de malformações arteriovenosas e de vasos alimentadores - André Tiago Andrade Martins
  
  
• Observer Biased Clustering in Wind Turbine Fault Diagnosis - Bernardo Alpoim Filipe Ferreira Pimenta
  
  
• Dual Resource Constrained Flexible Job Shop Problem using Hybrid Genetic Algorithm - Diogo Miguel Afonso Marta
  
  
• Solving Large Scale Arc Routing Problems - Diogo Miguel Ferreira de Oliveira
  
  
• Studies for a Spatial See-Through Augmented Reality System to support Manufacturing Operations - Diogo Vicente Cleto dos Santos de Sousa Rodrigues
  
  
• Online learning of MPC for autonomous racing - Gabriel Alexandre Francisco Costa
  
  
• Predicting Remaining Useful Life with Machine Learning Algorithms for Predictive Maintenance - Gonçalo António Gonçalves Gago Felício
  
  
• Intelligent Funds Assistant - Inês Sáragga Leal Saraiva
  
  
• Análise EEG para Controlo de Impedância Articular - João Pedro Luís Fernandes
  
  
• Industrial Robot Based 3D printer - João Domingues Alves Cantante Pires
  
  
• Dexterity in Robotic Grasping Object Oscillation - José Maria Rosa Alves
  
  
• Técnicas de Pós-processamento de imagem para métodos experimentais em termografia - José Francisco Proença Mendes
  
  
• Control of a Wave Energy Converter Using Reinforcement Learning - José Carlos Mota Trigueiro
  
  
• Torque Vectoring for Race Cars - Luís Carlos Dias Duarte
  
  
• Electricity Price Forecasting for MIBEL market: a machine learning approach - Margarida Messias de Jesus Rufino Ribeiro
  
  
• Impedance Controlled Planar Flexible Robot for Identification of Human Ankle Dynamics - Nivaldo Sá Caires
  
  
• Digital Twin of a Flexible Manufacturing System for Solution Preparation - Paulo Francisco Carreira Faria
  
  
• 3D Statistical Shape Model of Proximal Femur for Femoroacetabular Impingement Preoperative Planning - Rafael Lampreia dos Santos Fataça
  
  
• Identificação da dinâmica do braço humano através de experiências com o KUKA Lightweight Robot 4+ - Ricardo Alexandre Pereira Aniceto
  
  
• Fuzzy Multi-Item Newsvendor Problem: An Industrial Application in a Cloud Environment - Rodrigo Manuel Madeira Cunha Luís
  
  
• Applications of Autonomous Learning Multi Model Systems to Binary Classification on Imbalanced Datasets - Rodrigo Saragoça Boal Ventura
  
  
• Path Planning and Guidance Laws of a Formula Student Driverlass Car - Solange Dolores Rebocho dos Santos
  
  
• Modeling, simulation, and altitude control of a weather meteorological balloon - Thaynara Caminhas Oliveira
  
  
• Vision based collaborative task planning and execution with a UR3 robotic manipulator - Tomás Moreira Furtado Carvalho Fernandes
  
  
• Developing short term algorithmic pairs trading strategies using time series modeling - Afonso Villaret Frischknecht
  
  
• Reconstrução 3D para indústria pedreira - Ágata Filipa Lopes de Barros
  
  
• Marine Acoustic Signature Recognition using Convolutional Neural Networks - Alexandre Martins Correia
  
  
• Experiments on Control of a Soft Continuum Manipulator Robot - Clara Mayumi Bertolini Hamada
  
  
• Prediction of the quarterly Gross Domestic Product in Portugal Inês Cardoso Soares
  
  
• Analysis of Investment Decisions in Stock Portfolios using the Capital Asset Pricing Model - José Alexandre de Ferrão Valadares e Gomez Correia
  
  
• Characterization of contact interaction with an inflatable link robot - Margarida Fernandes Martinho
  
  
• Coordination Strategies for Supply Chain Management of Perishable Goods using Model Predictive Control - Margarida Cardoso dos Reis
  
  
• Entrepreneurial Impact: The role of the Instituto Superior Técnico - André Jorge Dias Coelho
  
  
• Prediction of postoperative complications in oncology patients using fuzzy logic-based machine learning - André Aguiar de Matos de Lima Miranda
  
  
• Traction control of a Formula Student prototype - André Filipe Alves Grancho Barroso
  
  
• Gestão Automática de Iluminação em Salas de Aula do IST - Bruno Miguel Grosso Marques Ferreira
  
  
• Development of an automatic machine for the extraction, refrigeration and availability of carbonated beverages - Frederico António Lopes Policarpo Simões Filipe
  
  
• Contact and force experiments with an inflatable manipulator link - Inês Pederneira Victorino
  
  
• Learning to Drive Autonomously a Race Car - João Gomes de Oliveira Pinho
  
  
• Glass-Box Quality Estimation for Neural Machine Translation - João Pinto Correia de Moura
  
  
• Fenómenos de Difusão em Mercados de Electricidade - Luís Miguel Alves Miranda
  
  
• Desenvolvimento de um Sistema de Impressão e Monitorização de Microgotas - Maria Beatriz Cavaleiro de Ferreira
  
  
• Thermally Induced Reduction of the Load (TIRL) during Electron Beam Welding of CuCr1Zr - Ricardo Miguel Diogo de Oliveira Chin
  
  
• Bike Sharing System Simulator with User Incentive Methods - Rodrigo Miguel de Jesus Plácido
  
  
• Application of learning methods for predictive modelling with human factors in aviation industry - Rui Pedro dos Reis Nogueira
  
  
• Towards Analytical Laboratories 4.0 Leveraging Augmented Reality - Teresa Figueiroa Teixeira de Abreu
  
  
• Context-aware Session-based Recommendation An Attentional Deep Learning approach to Re-ranking - Tomás Alexandre de Menezes Pereira
  
  

Área Especialização - Energia

• Carbon nanotube synthesis by impinging flame - Fabrício Lucas Tavares Monteiro
  
  
• The Influence of Burner Surface Morphology On Flame Stabilization - Safira da Silva Braz
  
  
• Study of OGMA ́s test facility - Mariana Sequeira Glória Monteiro
  
  
• Smart Ventilation Controller for Infividual Offices - David José da Rocha Marques
  
  
•   Banco de Ensaio de Reatores da TAP - António Moita Coelho Seita Janeiro
  
  
• Estudo da Aplicabilidade do JP-8 no Motor da VBR Pandur II8x8 – Ensaios em banco - Francisco de Brito Rações Franco Frazão
  
  
• Avaliação Energética da Alocação de Autocarros a Rotas Especificas - Bernardo Leiria Ribeiro
  
  
• Numerical simulations of fire whirls - Rui Miguel Godinho Parente
  
  
• Modelação técnico económica da integração de painéis fotovoltaicos no Corinthia Lisboa Hotel - Ana Raquel Ferreira Galguinho de Almeida Gomes
  
  
• Aerodynamic Numerical Simulation of a Race Car - Filipe Miguel Gaspar Correia
  
  
• Porous Electrodepositions Influence on Conical Flames Stability in Unconfined Single-point Injection Burners - André Henriques Marques Neves
  
  
• Caracterização Experimental da Transmissão de Calor em Escoamentos no Interior de Tubos Corrugados - Filipe Arruda Andrade
  
  
• Design of a Portable Power Generation System Using Compressed Air Energy Storage Concept - Francisco Bandeira Brás Monteiro
  
  
• Chemiluminescence of Hydrogen Enriched Biogas Blends - Nuno Miguel Pina Bastos Rocha1
  
  
• A Pegada Carbónica Empresarial - o Caso da Caetano Coatings - Francisco Osório do Amaral Aparício Lopes
  
  
• Design de Perfis Hidrodinâmicos para Turbinas Marítimas - Francisco Mira Piteira Espenica
  
  
• Modelling and experimenting thermal energy storage through the use of PCM in low thermal inertia office - Duarte Pedro Vicente Drumond de Abreu
  
  
• Aerodynamic Optimization of Horizontal Axis Wind Turbines Using the Lifting Line Theory - Gonçalo dos Santos Sousa
  
  
• Modelling and experimental validation of mattress modified with PCM to improve the thermal comfort of homeless - Gonçalo Carreira da Silva
  
  
• Biomass Gasification in a Drop Tube Furnace - Frederico Santos Duarte
  
  
• Gestão inteligente com conceito de Internet das Coisas (IoT) Aplicado ao controlo de iluminação numa sala de aula - João Francisco Firmino Esteves
  
  
• Ensaio experimental de uma boia de conversão de energia das ondas para aplicações oceanográficas - João Pedro Silva Ferreira
  
  
• Modelação de transitórios lentos em redes de gás - André Pereira
  
  

• 
  

Área Especialização - Produção

• Inverse Dynamics of a Swimmer Multibody Model: An Analysis of the Upper Limbs During Front Crawl - Francisca Tito de Carvalho Simões
  
  
• Otimização da Sequência de Empilhamento de Compósitos Laminados utilizando Modos Incompatíveis e DMO - Marco António Martins Da Costa
  
  
• Study of Polymer-Metal Adhesion Mechanisms in Fused Filament Fabrication Process - Guilherme Alberto da Cunha Martins
  
  
• Wood-biopolymers composites - José Pedro Nereu Pintor
  
  
• Motorcycle Modelling and Trajectory Controlling - Miguel Zambujo Orvalho
  
  
• Computational Experiments on Maintenance Scheduling in Airline Companies - TAP Air Portugal Case Study - Francisco da Silva Lopes Nunes Agostinho
  
  
• Out-of-Plane Compression Behaviour of Honeycomb Structures with Mass Gradient Produced by Additive Manufacturing - Tiago Ventura Rua
  
  
• Biomechanical Analysis of the Crystalline Lens Complex: A Computational Model - Leonor Jud
  
  
• iro3d – Deposição Seletiva de Pós Influência dos parâmetros do processo nas propriedades mecânicas dos provetes de vidro produzidos por deposição seletiva de pós - João Nuno Santos Vasconcelos
  
  
• Design of a New Absorbable Retaining Screw - Guilherme Nobre Opinião
  

2019/2020

Área Especialização - Energia

• Solar still performance and enhancement techniques analysis using an alternative thermal model approach - André António Vieira Lisboa
  
  
• Influência da diferença de temperatura inicial entre dois espaços e de diferentes caudais de vento na eficiência de selagem de uma cortina de ar - Nuno Rafael Vilar Vasques da Costa Mendes
  
  
• Estudo paramétrico de otimização da geometria de tubos corrugados para maximização da transmissão de calor em escoamentos internos - André Cacilhas Machado
  
  
• Unsteady Behaviour of Helicopter Blades - Francisco Baptista Romão Machado
  
  
• Ammonia combustion on a swirl / bluff body stabilized burner - Miguel Alexandre Coelho Franco
  
  
• Projeto e ensaio de uma turbina auto-retificadora de ação axial com pás diretrizes dispostas em múltiplas coroas - António Fontes Amorim da Cunha
  
  
• Assessment of the Numerical Properties of ReFRESCO: a Pressure-Based Compressible Flow Solver - Cristiano Miguel Filipe Silva
  
  
• Acclimatization of a Refurbished Detached House in Sintra With Two Occupancy Modes: Study of Different HVAC Systems and Passive Measures - Manuel Saias Tito de Morais Oliveira
  
  
• Experimental Study on Film and Transpiration Cooling Through Additively Manufactured Porous - Carolina Rodrigues Poupinha
  
  
• Análise aerotermodinâmica de um intercooler - Guilherme Gomes dos Santos
  
  
• Dimensionamento de uma frota de veículos - Goncalo dos Santos Pereira
  
  
• Simulação numérica e otimização do processo de produção de pigmentos cerâmicos com recurso a micro-ondas - Pedro André Varela Ramos
  
  
• Valorisation of olive wine industry co-products techno-economic analysis and life cycle assessment - João Miguel Caras Altas Santana Ramos
  
  
• Numerical investigation of steelmaking by-products recycling using microwave radiation - Luís Miguel Nobre da Silva
  
  
• Verification and Validation of a 2D wave model - Eduardo Nunes Lima

Área Especialização - Produção

• Cellular structures for use in composite panels with a mass distribution gradient produced by additive manufacturing - Bernardo Garrido Marques da Silva
  
  
• Projeto e desenvolvimento de um manipulador para transporte de dispositivos de fixação para medição - Diogo Faria Neves Mendes
  
  
• Aplicação de Metodologia RCM3 ao Sistema de Refrigeração do Sistema de Armas Pandur II 8x8 - Filipe Emanuel Carvalho da Silva
  
  
• Wear Evolution of Railway Wheels as Function of the Operation Conditions - Filipe Plácido Alves
  
  
• Predicting maintenance needs in railway wheelsets using survival modelling - Guilherme Amaral Cruz e Horta Caldeira
  
  
• Manutenção Preventiva Condicionada por Análise de Óleos em Serviço - Caso de Estudo na The Navigator Company - João Maria Brissos e Silva
  
  
• Public Service Obligations (PSOs) in Air Transport - A Benchmarking approach - João Miguel Mateus Ferreira da Costa
  
  
• Impacto das tecnologias de segurança dos veículos na sinistralidade rodoviária em Portugal - João Pedro Martinho dos Santos
  
  
• Estudo de geometrias em flexão a quatro pontos - João Subtil Lobo
  
  
• Optimizing maintenance decisions in rails - a Markov Decision Process approach - Luís Pedro Correia Beatriz Sancho
  
  
• Reliability and Availability Assessment of a Cargo Locomotive Bogie - Manuel Derichsweiler Bessa Pereira Leite
  
  
• Inverse Dynamics of a Swimmer Multibody Model: an Analysis of the Lower Limbs During Front Crawl - Mariana Fabião Ribeiro de Brito Sequeira
  
  
• Metodologias Integradas de CAD, CAE e PDM Para o Projeto de um Veículo de Competição - Pedro Ferreira Sardinha Diogo de Matos
  
  
• Dynamics of Freight Trains Under Realistic Operation Conditions - Pedro Moreira Ordiales Millan
  
  
• Desenvolvimento de uma unidade móvel para a recuperação de vidro de embalagem - Ricardo Manuel Afonso Batista
  
  
• Establishment of process requirements for selective powder deposition and validation through the production and testing of specimens - Samuel Videira Magalhães
  

Área Especialização - Sistemas

• Development of an Ice Crystal Generator and an Ice Crystal Impact Analysis Tool - Alexandre Miguel Correia Cuco
  
  
• Automatic Detection of Railway Track Obstacles using a Monocular Camera - Guilherme Kaname Reis Kano
  
  
• Single-partition adaptive Q-learning Algorithm and applications - João Pedro Estácio Gaspar Gonçalves de Araújo
  
  
• Uma Arquitetura para Localização e Mapeamento de Robôs Móveis - João Santana Tavares de Castro
  
  
• Deteção e classificação de danos em pás de túrbinas eólicas 1 usando inspeção visual automática - Tiago Miguel da Cunha Cesteiro
  
  
• Incremental Backstepping Control of an Overactuated Tilt-Quadrotor - André Macara Reis
  
  
• Real-Time Hybrid Force/Position Control with a KUKA Industrial Robot - Daniel Loras Leite
  
  
• Solid Volume Calculator - An Approach to Glass Molds In-line Inspection - Gabriela Magalhães de Sousa
  
  
• Model Predictive Control with a Neural Network Model of a Formula Student Prototype - Henrique Manuel Caldeira Pimentel Furtado
  
  
• Mortality Prediction in Acute Kidney Injury Patients Using Natural Language Processing and Machine Learning - Joaquim Pedro Ferreira Rodrigues
  
  
• Robotic Surgical Navigation for Prostate Biopsies - José Francisco Martins Damasceno Costa
  
  
• Development of Shape Memory Alloy Actuated Gripper using Jamming Granular Effect - Miguel Santos Ramalho
  
  
• Model Predictive Control for Wake Steering: a Koopman Dynamic Mode Decomposition Approach - Nassir Rodrigues Cassamo
  
  
• RADAR vs LIDAR for obstacle detection and collision avoidance - Tiago Filipe Félix de Andrade
  
  
• Delivery Truck Assignment for Supply Chain Management - Tiago Simões Costa
  
  
• Simulation of a latex balloon with a hydrogen generation system - Vasco Miguel Campos da Gama Teles Cepêda
  
  
• Target tracking using visual servoing: the Parrot AR Drone 2.0 case study - Alexandra Domingos Reis Pereira
  
  
• Path Following and Control for Autonomous Driving of a Formula Student Car - Alexandre Pereira de Athayde do Passo
  
  
• Integração de um Sistema Ótico para Reconstrução 3D - Filipe Ferreira Monteiro
  
  
• Pre-flight and real-time path planning of a balloon launched flying wing - Lin Yu
  
  
• Fractional Order Processing of Satellite Images - Manuel Maria Marques Adegas Bairrão Henriques
  
  
• Development of a Docking Solution for Autonomous Vehicles - Miguel Duarte Castanheira Rodrigues Dias
  
  
• Data Driven Modelling of a Dam System Discharge - Paulo Rocha
  
  
• Superpixels Segmentation and Interpretable Fuzzy Models for Fire Data Annotation - Pedro Manuel Serro Messias
  
  
• Accuracy Evaluation in Robot-Assisted and Ultrasound-Guided Neurosurgery - Pedro Veigas dos Santos
  
  
• Generate a Birds Eye View from Fisheye Cameras using Generative Adversarial Networks - Ricardo Branco Lucas
  
  
• Prediction of Human Factors in Aviation Incident Reports in Machine Learning and Natural Language Processing - Tomas Moitinho de Almeida Andrade Madeira
  
  
• Vision Based Soft Robotic System for Fruit Picking - Afonso Fernandes Rito Dos Santos
  
  
• Concept Development for Lower Limb Exoskeleton - Artur Jorge Silva Coutinho Machado
  
  
• Modeling and Control for a Rhombic-Like Vehicle: A case study - Chenshan Xu
  
  
• Enhanced CT/MRI non-rigid brain registration with a custom phantom - Filipa Ferreira Pinto
  
  
• Advancements in Autonomous Learning Multi-Model Systems - Filipe Santos
  
  
• Multi-objective meta-heuristics applied to flexible job shop scheduling problems - Joana Inês Cunha Cabral
  
  
• Design and experiments on a continuous deformation soft manipulator module - João Maria Cruz Azevedo Bastos Salgueiro
  
  
• Simulation Model Design of a Mould Factory - Miguel Folque de Gouveia
  
  
• A High-Order Discontinuous Galerkin Method for Optimal Control of an OWC Spar Buoy - Ricardo Filipe Gomes Duarte
  
  
• Reinforcement Learning for Job Shop Scheduling Problems - Ricardo Magalhães
  
  

2018/2019

Área Especialização - Energia

• On the Aerodynamics Performance of MotoGP Wings - João Gaspar Cardoso Coelho da Silva
  
  
• Optimization model to design aviation networks - Greek PSO case study - Francisco Costa Pereira Leandro
  
  
• Impacts of building retrofit in building energy performance and users’ behaviour - José Marco Agrela Lourenço
  
  
• Hydrodynamic and Fluid-Structure Interaction analysis of a Windsurf Fin André Roquette Quadros Saldanha
  
  
• Microdroplet formation and flow characteristics of water and nanofluids in microfluidic channel - André Filipe Loureiro Governo
  
  
• Techno-economic assessment of semisubmersible FOWT conceptsTomás Norton de Matos Cortes
  
  
• Thermal Study of a Module for SWGO - Ricardo Lordelo
  
  
• Predicting Demand in Bike Sharing Systems - GIRA case study - Vera Maria Guia Lucas
  
  
• A Novel Approach for Temporal Discretizations with High-order Finite Volume Schemes - Pedro Miguel Pereira Costa
  
  
• Impacts of building retrofit in building energy performance and users’ behaviour - José Marco Agrela Lourenço
  
  
• Numerical Calculation of a Pressure Wave Propagating in a High Speed Train Tunnel - Assessment of the Effects of the Ballast Bed - Francisco Maria Soromenho Viana

Área Especialização - Produção

• A functional analysis of an Additively Manufactured Bellcrank with long fibre reinforcement - Frédéric Louis Bento
  
  
• Impacto da erosão escapular no comportamento mecânico da artroplastia inversa do ombro - Inês Sesinando Agulheiro
  
  
• Analysis of the Transport of an Innovating Offshore Wind Turbine Foundation - José Maria Andrade Santos Leitão Cardoso
  
  
• Comportamento Eléctrico de um Polímero Condutor sob Tensão - Rita Maria Figueiredo
  
  
• Development of a cylindrical coordinate based fused deposition modeling machine with multiple print heads - Diogo Pereira de Brito Líbano Monteiro
  
  
• Characterization and Evaluation of Mechanical Behaviour of Endodontic grade NiTi Wires - Samuel Pires Pereira
  
  
• Experimental and Numerical Study of an Aircraft's Structural Condition - Tiago Martins
  
  
• WAAM processing of AISI 410 stainless steel for part building - João Miguel Araújo Bruno
  
  
• Design and Structural Analysis of a Tension Leg Platform for Offshore Wind - Vicente Durão Liberato Salgueiro

Área Especialização - Sistemas

• Control of a wave energy converter based on the oscillating water column principle - Julio Arantes
  
  
• Towards an agent-based manufacturing control strategy: a simulation study - Guilherme Lopes
  
  
• Simulation of an Emergency Department - Ricardo António Terras Lopes
  
  
• Modelling and Attitude Stabilization of a Tilt-Quadrotor: Simulation and Experimental Validation - Ricardo Jorge da Costa Andrade Marques
  
  
• Model predictive control for optimal supply chain management - Eduardo Guilherme Ferreira Morais de Araújo
  
  
• Development of a Lightweight Visual-based Pose Estimation Sensor: Implementation and Validation - Renato Miguel da Silva Severiano
  
  
• Control of an Oscillating Water Column Wave Energy Converter - João Pedro Cardoso Rodrigues
  
  
• Design and Implementation of a Contactless Master Interface for Telemanipulation Applications - José Eduardo Moucho Paulo Guerra
  
  
• Identification of Human MusculoSkeletal Lower Limb Dynamics - Pedro Miguel Martins Jacinto
  
  
• Classification of Gait Patterns in Spastic Diplegia - Sofia Martins Camacho Lança
  
  
• Blood Pressure Pattern Identification in AKI Patients using Linguistic Summaries - Ana Luisa Martins
  
  
• Multi camera System for Stone Slab Scanning - João Henrique de Agrela Vital
  
  
• Robotic Arm with Base Force/Torque Sensing Towards Underwater Manipulation - Paulo Leite Machado
  
  
• Development of a small-scale educational workbench for Industry 4.0 - André Pedro Ramalho Martins Pacheco
  
  
• Performance Measures Evaluation for Highly Imbalanced Datasets: Application to Short Term Renal Failure Prediction - Ricardo Alexandre Silva Maia
  
  
• Control and Estimation Methods for Unknown Load Transportation with Quadrotors - Pedro Miguel Gomes Outeiro
  
  
• Predicting Emergency Departments Revisits using Machine Learning and Natural Language Processing - Rúben Belo Matias Heitor Mendes
  
  
• Telemanipulation of a Redundant Manipulator for Minimal Invasion Surgery using a Gestural Master Interface - Miguel Santana Bigares
  
  
• Linear and Nonlinear Control of UAVs: Design and Experimental Validation - Luís Carlos Cunha Martins
  
  
• Vision-Aided Complementary Filters for Attitude and Position Estimation of UAVs - João Pedro Dias Madeiras
  
  
• Computational modelling of train braking system - José Pedro Machado dos Santos
  
  
• Machine Learning Approaches for Survival Prediction of Critically Ill Patients Under Insulin Therapy - Bernardo Marreiros Firme
  
  
• Dynamic Scheduling using Artificial Bee Colony Algorithm - Inês Carolina Azevedo Ferreira
  
  
• Incremental Backstepping of a Fixed-Wing Commercial Airplane under Uncertainties - Nuno Miguel Guerreiro
  
  
• Concept and Evaluation of a Technology independent Data Acquisition Architecture for Industrie 4.0 - Pedro João Costa Pinto Prata
  
  
• System development for improvement of quality inspection and control in the food industry - Rodrigo Alves Lopes
  
  
• Cooperative Transportation of Loads with UAVs - Tiago Marquês Bacelar
  
  
• Analysis of Cryptocurrencies Exchange Rates - Manuel Maria Granado de Botelho Morais
  
  
• Deteção automática de defeitos em superfícies especulares com um Sistema de Visão e luz estruturada - Pedro Miguel Duarte Pina dos Santos
  
  
• Robot Grasp Planning in Domestic Environments - João Pedro Matos Cabo Rosado Gonçalves
  
  
• Machine Learning For Preempetive Fault Detection On Aircraft Air Data Reference System - Diogo João Figueiredo Vieira
  
  
• Field Description Using Aerial Images - Alexandre José Cordeiro Leal
  
  
• Controlo de um Conversor de Energia das Ondas usando um sistema multi-agente e métodos de aprendizagem automática - Nuno Miguel Antunes Pereira
  
  
• Calibração cinemática de um robô manipulador para biópsia cerebral - Nuno Augusto Alves Pereira
  
  
• Development and Evaluation of Concepts regarding Hybrid Multi-objective Optimization for Integrated Chemical Processes - Ana Catarina da Silva Romão
  
  
• Object Detection, Localization and Tracking based on Ceiling Top down View Image: Design and Experimental Implementation - Carolina dos Santos Godinho
  
  
• Descentralized sensing and web publishing - Fábio Miguel Timóteo Paulino
  
  
• Energy Consumption Estimation in Lap Time Simulation - José Filipe Dias Duque Marques Loureiro
  
  
• Towards Safe Human-Robot Interaction in Industrial Environments - Rafael de Almeida Lucas
  
  
• Studying Bone Remodelling for Therapy Predictive Control - Ana Raquel Lopes Miranda
  
  
• Robust Control of a Wind Turbine Using Third Generation CRONE Control - Francisco Ravasco
  
  
• Fuzzy Modelling for the Detection of Non-Technical Losses Using Time Variant and Invariant Features - Diogo Fermisson Caridade
  
  
• Optimization Of Hybrid Fiber Reinforced Composites - Aiming Pseudo-Ductility Using Meta-Heuristics - Alexandre Miguel Monteiro Correia
  
  
• 3D Fractional Order Image Processing for Cancer Detection - José Filipe Mendes Gonçalves
  
  
• Image guided surgical navigation for pedicle screw placemen - Anup Saha
  
  
• Development of Genetic Algorithms in a Branch-and-Bound Framework to Solve European Air Traffic Flow Management Problems with Conflict Cost - André Filipe Lança Serrano

 

2017/2018

Área Especialização - Energia

• Carbon nanotube synthesis by impinging flame - Fabrício Lucas Tavares Monteiro
  
  
• The Influence of Burner Surface Morphology on Flame Stabilization - Safira da Silva Braz
  
  
• Stdy of OGMA´s Test Facility - Mariana Sequeira Glória Monteiro
  
  
• Smart Ventilation Controller for Individual Offices - David José da Rocha Marques
  
  
• Banco de Ensaio de Reatores da TAP - António Moita Coelho Seita Janeiro
  
  
• Estudo da Aplicabilidade do JP-8 no Motor da VBR Pandur II 8x8 - Ensaios em Banco - Francisco de Brito Rações Franco Frazão
  
  
• Avaliação Energética da Alocação de Autocarros a Rotas Específicas - Bernardo Leiria Ribeiro
  
  
• Numerical Simulation of fire Whirls - Rui Miguel Godinho Parente
  
  
• Modelação Técnico Económica da Integração da Painéis Fotovoltaicos no Corinthia Lisboa Hotel - Ana Raquel Ferreira Galguinho de Almeida Gomes
  
  
• Aerodynamic Numerical Simulation of a Race Car - Filipe Miguel Gaspar Correia
  
  
• Porous Electrodepositions Influence on Conical Flames Stability in Unconfined Single-Point Injection Burners - André Henriques Marques Neves
  
  
• Caracterização Experimental da Transmissão de Calor em Escoamentos no Interior de Tubos Corrugados - Filipe Arruda Andrade
  
  
• Design of a Portable Power Generation System using Compressed Air Energy Storage Concept - Francisco Bandeira Brás  Monteiro
  
  
• Chemiluminescence of Hydrogen Enriched Biogas Blends - Nuno Miguel Pina Bastos Rocha
  
  
• A Pegada Carbónica Empresarial - O caso da Caetano Coatings - Francisco Osório do Amaral Aparício Lopes
  
  
• Design and Optimization of Hydrofoils Tailored for Marine Current Turbines - Francisco Mira Piteira Espenica
  
  
• Modelling and Experimenting Thermal Energy Storage the use of PCM in Low Thermal Inertia Office - Duarte Pedro Vicente Drumond de Abreu
  
  
• Aerodynamic Optimization of Horizontal Axis Wind Turbines Using the Lifting Line Theory - Gonçalo dos Santos Sousa
  
  
• Modelling and Experimental Validation of Mattress Modified with PCM to Improve the Thermal Comfort of Homeless - Gonçalo Carreira da Silva
  
  
• Biomass Gasification in a Drop Tube Furnace - Frederico Santos Duarte
  
  
• Gestão Inteligente Baseado no Conceito de Internet das Coisas Aplicado ao Controlo de Iluminação de uma Sala de Aula - João Francisco Firmino Esteves
  
  
• Ensaio Experimental de uma Boia de Conversão de Energia das Ondas para Aplicações Oceanográficas - João Pedro Silva Ferreira
  
  
• Modelação de Transitórios Lentes em Redes de Gás - André Ramos Pereira
  
  
• CFD modeling of a moving bed biofilm reactor for biological nitriication - Rodrigo dos Santos Raposo
  
  
• Natural Ventilation in Service Buildings – a computational study – Amrin Banu Taboleiros Ahmed Star
  
  
• Analysis of energy consumption in the food service sector - Manuel Coutinho Almeida
  
  
• Study of OGMA´s test facility – Mariana Sequeira Glória Monteiro
  
  
• Methodology to aid in the decision-making of retrofit solutions in the residential sector using calibrated building energy simulation models – Luís Maria Soveral Padeira Bivar de Azevedo
  
  
• Development of a modelling tool for analysis of specified renewable energy penetration scenarios. Case study of Porto Santo, Madeira - Cristiano Correia Chistolini
  
  
• Assessment of Smoothed Particle Hydrodynamics method as a tool to model the motion of a floating device - Luís Miguel Mendes de Almeida
  
  
• Recuperação de Energia em Estações de Redução de Pressão do Gás Natural - Gonçalo Secca Serra
  
  
• Condensation of R134a and R134a-Oil Mixture in a Multiport Flat Tube - Sandra Abreu Ferreira Gomes
  
  
• Análise da Viabilidade da Instalação de um Sistema de Climatização por Tubos Enterrados no Pavilhão de Mecânica III com a Ajuda do EnergyPlus - Ricardo Filipe Madeira Cardão
  
  
• Influence of the flame holder in the stabilization and morphology of inverted methane-lean premixed flames - Pedro Nuno Fernandes Madeira
  
  
• Flows in Suction Channels of Air Exhausts - Alexandre José Pomares Ferro
  
  
• Unstructured polyhedral mesh generator with improved grid quality metrics - Manuel Dias da Costa
  
  
• Numerical modelling and optimisation of a Backward Bent Duct Buoy for large scale electricity production - Pedro Ferreira Reis
  
  
• Construção e ensaio experimental de um dispositivo de coluna de água oscilante do tipo BBDB - Tiago de Almeida Simões Lopes
  
  
• The influence of DC elctric fields on small, laminar, premixed flames - Mário Barcínio Tita Pinto
  
  
• Promoção de Eficiência Energética numa Unidade Industrial do setor Automóvel - Mário Afonso Silvestre Macias Mendes Pelicano
  
  
• Development and validation of smart grid appliances models within a microgrid: a case study for a Portuguese Village - Afonso Pedro Gonçalves
  
  
• Modelling and analysis of a backward bent duct buoy WEC for oceanographic applications - Ana Paula de Almeida Duarte
  
  
• Experimental assessment of negative spring on spar OWC based on the HNS method - Catarina Dias Macara
  
  
• Avaliação do desempenho de autocarro eléctrico em condições reais de utilização - Hugo José da Silva Fernandes
  
  
• Segregated Solvers for Incompressible and Compressible Flow in Collocated Grids - Francisco de Lemos Cabral Granadeiro Martins
  
  
• Promoção de Eficiência Energética numa Unidade Industrial de Produção de Rações - André dos Santos Veiga Ferreira
  

Área Especialização - Produção

• Desenvolvimento de Sistema de Gestão Visual para o Apoio ao Planeamento e Controlo de Actividades de Manutenção - Bruno Ricardo Mendes Rocha
  
  
• Life Cycle Assessment of a Hybrid Train - José Eduardo Nunes de Brito
  
  
• Caracterização a Avaliação dos Parâmetros de Fabrico nas Propriedades Mecânicas de um Material Compósito obtido por Impressão 3D - Pedro Miguel Rijo Diogo
  
  
• Diagnóstico e Melhoria de uma Linha Produtiva através de Métodos Lean Manufacturing - Verónica Isabel de Sousa Pereira Cardoso
  
  
• Eroded Crater Morphology by Plasma Single Discharge - Daniel Diogo Saião Ferreira
  
  
• Boss Forming de Varões - Análise Experimental e Numérica - André Filipe Sampaio Pires
  
  
• Influência do Meio Envolvente no Coeficiente de Atrito - Paulo Sérgio Franco Farinha
  
  
• Influence of  Parameters on Vehicle Durability - André Filipe Garcês Alves de Amador Dinis
  
  
• Determinação da Tenacidade à Fractura em Modo I e Modo II de Chapa de Cobre - Tinghan Huang
  
  
• Determinação da Enformabilidade de Tubos de PVC à Tração - Daniel Silva Fernandes
  
  
• Project of the Rear Wing of a LMP3 Race Car - Gonçalo Gaspar Bentes Pimenta
  
  
• Supraspinatus Tendon Repair - A Three-Dimensional Finite Element Analysis - João Pedro Couto Reis
  
  
• Desenvolvimento e Avaliação de Novos Conceitos no Projecto de Sistemas de Retenção para Próteses Dentárias - Pedro Afonso Macedo Mendes Esteves
  
  
• LCC and LCA of Innovative Surface Coating Processes - Diogo Lopes de Almeida
  
  
• Avaliação do Desempenho Lean: Modelos e Aplicação - Margarida Boler Cláudio da Silva Barros
  
  
• Delamination and Fracture Process in Advanced Composite Materials used in Aerospace and Automotive Industry - Nuno Miguel Cardoso Leitão
  
  
• Metodologias de Projecto em Reboques - Projeto Semirreboque Basculante Minas - João Madeira Dias
  
  
• Revestimento de Fachada Ventilada com Painéis Compósitos: Modelação, Experimentação e Melhoria de Desempenho - Duarte Ribeiro Tamen
  
  
• Contribuições para a Melhoria do Sistema de Informação de Suport à Manutenção - Um caso de Estudo no Grupo Águas de Portugal - António Luís Ferreira Horta Casanova Pinto
  
  
• Investigação de Acidentes Rodoviários com Dados e Falhas dos Sistemas de Segurança do Veículo - Duarte Correia Monteiro Cabral Campello
  
  
• Produção Lean em PMEs - Diagnóstico e Plano de Implementação, um caso de Estudo - Bruno Alexandre de Oliveira Madaleno
  
  
• Fatores de Risco, Efeito do Capacete na Biomecânica do Impacto e Simulação Computacional de Acidentes com Velocípedes - João Alberto Teixeira Rodrigues
  
  
• Topological Optimization of an Interface Metal Structure - Rafael Vieira de Sequeira
  
  
• Dynamic Analysisof a Beam under Moving Loads - Várzeas Bridge Case Study - Rúben Filipe Macedo Ribeiro
  
  
• Lean Design no Projecto de Moldes para Injeção de Plástico - Do Design da Peça ao Design do Molde - Pedro Daniel Francela Mateus
  
  
• Estudo numérico da propagação de fendas de fadiga num aço de alta resistência - Tiago Gomes dos Santos
  
  
• Determinação da Enformabilidade de Tubos à Tração - João Miguel Guerra Pinto Gago
  
  
• Development of an Automated Modular System for High Temperature Ultrasonic Testing and Longitudinal Wave Attenuation at High Temperatures - João Monteiro
  
  
• Non-Destructive testing of large metal parts produced by Wire Arc Additive Manufacturing – João Carlos Barradas Bento
  
  
• Melhoria da eficiência de utilização de recursos no bloco operatório de um hospital – Inês Leal Soares
  
  
• Computational Modelo f na Offshore Monopile Wind Turbine – Miguel Francisco Cantinho Viana
  
  
• Desenvolvimento e Projeto Mecânico de uma Tricicleta – Carlos Eduardo Freitas Pereira
  
  
• Planning maintenance in bus operating companies Carris case study - Rodrigo Arrais Martins
  
  
• Optimization of Maintenance and Availability in a Train Operating Company - Fertagus Case Study - Luís Filipe Teixeira da Costa Mira
  
  
• Identification and evaluation of parameters on Storing structures on working site - João Pedro Alpendrinho Galha Dias
  
  
• Enformabilidade do Tubo de PVC (Policloreto de Vinil) - Ricardo Boavida
  
  
• Influência da Microestrutura no Comportamento Mecânico do Alumínio Comercialmente Puro - António Carvalhosa
  
  
• Aplicação do Pensamento Lean ao caso prático de uma linha de transformação de madeira - Rodrigo Machado
  
  
• Análise e projeto preliminar de uma plataforma móvel para cobertura de piscina - Nuno Miguel Fialho Meneses Ferreira da Silva
  
  
• Processo de Ligação por Deformação Plástica Aplicado no Fabrico de Sistemas de Absorção de Energia - Diogo Filipe Gaspar Jorge Mateus Silva
  
  
• Surface Finish Optimization in Electrical Discharge Machining – Alberto Gonçalves do Poço
  
  

Área Especialização - Sistemas

• Multi-camera System Stone Slab Scanning - João Henrique de Agrela Vital
  
  
• Control and Estimation Methods for Unknown Load Transportation with Quadrotors- Pedro Miguel Gomes Outeiro
  
  
• Modelling and Attitude Stabilization of a Tilt-Quadrotor: Simulation and Experimental Validation - Ricardo Jorge da Costa Andrade Marques